<div dir="auto">Hello,<div dir="auto">First time.</div><div dir="auto">I had to accept a full denture for my lower teeth. Made from acrylic and inset teeth. It pains. I fill the gaps up with some kind of fixodent. Still it is very bad. Technology of it looks to me very low level. But my dentist sees it as normal. </div><div dir="auto"><br></div><div dir="auto">A denture has teeth on top of an acrylic form and this form has a hollow side which fits my lower "whatever flesh was left by the surgeon".</div><div dir="auto">Not nice to write down. But many are in this position.</div><div dir="auto">I hope I am clear.</div><div dir="auto">I look for information. Please, if you have info, tell me. I have Debian64 buster.</div><div dir="auto">1. How can I make a 3d model of my denture with a computer program?</div><div dir="auto">As a first step I want this denture as 3d model reproduced by 3d printing - with whatever material. A denture has two sides. Can it be done by photo?</div><div dir="auto">2. What kind of materials in 3d printing can I use for this medical purpose?</div><div dir="auto">3. Where can I find info/criticism about 3d printers for this purpose?</div><div dir="auto"><br></div><div dir="auto">If you look at the internet, you will find low level denture  technology is big business for the first world in the third world.</div><div dir="auto">With friendly greetings,</div><div dir="auto">P_ter</div></div>