<!DOCTYPE html>
<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
</head>
<body>
<div>Hoi folks,<br>
<br>
By means of introduction, I'm Pim and in my spare time I work on <a
href="http://fd.io" target="_blank"
data-saferedirecturl="https://www.google.com/url?q=http://fd.io&source=gmail&ust=1710101777652000&usg=AOvVaw0q0Aayml6ylCfiXKpxDMFy">fd.io</a>'s
Vector Packet Processor. I wanted to thank you for your excellent
work on Babel. Juliusz, Toke and Warren, for your inspiration with
v4-via-v6, and Juliusz, for your clear description of Babel, and
Ondrej for your help shepherding the implementation into Bird and
merging the RFC9229 commit.<br>
<br>
</div>
<div>I finished a few small code changes in VPP to allow
transit-net-less transport of IPv4 and IPv6 in VPP and wrote about
it on <a
href="https://ipng.ch/s/articles/2024/03/06/vpp-babel-1.html"
target="_blank"
data-saferedirecturl="https://www.google.com/url?q=https://ipng.ch/s/articles/2024/03/06/vpp-babel-1.html&source=gmail&ust=1710101777652000&usg=AOvVaw37oBRHd26W0c5EtaNtzwF8">https://ipng.ch/s/articles/<wbr>2024/03/06/vpp-babel-1.html</a>.
Considering this dataplane has some different idioms than Linux,
it took a bit of work.<br>
</div>
<div><br>
</div>
<div>I thought you might find this VPP + Bird2 + Babel story from
the field interesting. I wanted to ask you to read the article,
and in particular the <i>Additional thoughts</i> section at the
bottom, as it tries to ask for opinions on a somewhat complex
topic of unnumbered point-to-point interfaces in VPP.<br>
</div>
<div><br>
<div>There will be another article in a few months, once I decide
to move AS8298 from OSPF/OSPFv3 to Babel, and retire all of the
/31 and /112 transit networks. If I might take the opportunity
to ask two questions --<br>
<br>
AS8298 has a ring from Zurich, Frankfurt, Amsterdam, Lille,
Paris and Geneva. Our links are carrier ethernet from a telco.
Sometimes, when the underlying links fail, the underlay MPLS
network will recover and route around the failed telco link, and
I'll see latency on my own service go from say 6ms ZRH-FRA to
40ms ZRH-FRA; I thought this would be an excellent use case for
Babel.<br>
1) Is there any advice you could offer for rtt
cost/min/max/decay values when using Bird2 ?<br>
2) any words of wisdom before I move from an OSPF v2/v3 IGP to
Babel in a running network ? Does anybody on this list have
operational experience to share ?<br>
<br>
groet from AS8298,<br>
Pim<br>
</div>
</div>
</body>
</html>