[debian-edu-commits] [Debian Wiki] Update of "DebianEdu/Documentation/en/ITIL/ExtraConfiguration" by PetterReinholdtsen

[Debian Wiki]

Dear Wiki user,

You have subscribed to a wiki page or wiki category on "Debian Wiki" for change notification.

The "DebianEdu/Documentation/en/ITIL/ExtraConfiguration" page has been changed by PetterReinholdtsen:
https://wiki.debian.org/DebianEdu/Documentation/en/ITIL/ExtraConfiguration?action=diff&rev1=10&rev2=11

  
   1. What kind of "port forwarding" is it?
  
- Information about the "port forwarding" rules, if you have made any, is in the file`/etc/coyote/portforwards`
+ Information about the "port forwarding" rules, if you have made any, is in the file<tt>/etc/coyote/portforwards</tt>
  
  {{{
     coyote# more /etc/coyote/portforwards\nport Y 10.0.2.2 tcp 2333 22 # Example - Secondary SSH
@@ -354, +354 @@

  
  The various names used for network cards in Coyote Linux
  
- ||''This is connected to the existing network''||''Internet''||''Eth1''||''WAN''||
- ||This go to the Debian Edu network||LAN network||Eth0||LAN||
+ <table>
+ <tbody>
+ <tr class="odd">
+ <td align="left">''This is connected to the existing network''
+ </td>
+ <td align="left">''Internet''
+ </td>
+ <td align="left">''Eth1''
+ </td>
+ <td align="left">''WAN''
+ </td>
+ </tr>
+ <tr class="even">
+ <td align="left">This go to the Debian Edu network
+ </td>
+ <td align="left">LAN network
+ </td>
+ <td align="left">Eth0
+ </td>
+ <td align="left">LAN
+ </td>
+ </tr>
+ </tbody>
+ </table>
  
  Reboot the Coyote Linux machine and make sure the Coyote Linux floppy disk is present in the floppy station. Enssure that the machine is configured to boot from floppy drive.
  
@@ -582, +604 @@

  
  Due different network policies in The Department of Education in Oslo''must'' you make the following changes in [[#!ExtraConfiguration--mainserver|the main server]]:
  
- Change the following in the file`/etc/bind/named.conf` [[#!ExtraConfiguration--FTN.AEN983|[5]]]
+ Change the following in the file<tt>/etc/bind/named.conf</tt> [[#!ExtraConfiguration--FTN.AEN983|[5]]]
  
  {{{
         // forwarders {
@@ -610, +632 @@

  
  If you don't do this, you one will not be able to connect to the Internet due to problems with the name server (DNS) in The Department of Education in Oslo. Operating staff will also engage more people to get this changed to such as this service want it.
  
- After the change is inserted in `/etc/bind/named.conf` one need to restart bind with '''service bind9 restart'''
+ After the change is inserted in <tt>/etc/bind/named.conf</tt> one need to restart bind with '''service bind9 restart'''
  
   * Telenor ADSL, Norway
   * Oslo University College (Høgskolen i Oslo)
@@ -692, +714 @@

  
  Network cards with the type designation 3c509 from 3Com, has been a very popular series. Several have Coyote Linux with such network produced for example in 1989, almost 20 years ago. We've run these cards in three years with Coyote firewall without any problems. Once you have managed to get them running, they will probably run for a long time. But it is sometimes difficult to get the cards to work. This is because they have an ISA bus. This means that important addresses (IO) and termination messages (IRQ) must be handled manually. This is done automatically with PCI cards. But using one ISA card requires extra effort. IO and IRQ on these cards can be handled by an old DOS program. This can be somewhat difficult to obtain, since this is almost 20 years old software.
  
- The DOS configuration program is called `3c5x9cfg.exe`, and it is used in the following way:
+ The DOS configuration program is called <tt>3c5x9cfg.exe</tt>, and it is used in the following way:
  
   1. Start the machine with DOS. One can use !FreeDOS or a boot floppy created with Windows 95 or 98.
-  1. As soon as the machine is booted using DOS, insert a diskett with the program `3c5x9cfg.exe`. Run the program 3c5x9cfg.exe from the command line in DOS.
+  1. As soon as the machine is booted using DOS, insert a diskett with the program <tt>3c5x9cfg.exe</tt>. Run the program 3c5x9cfg.exe from the command line in DOS.
   1. When 3c5x9cfg.exe is started, each of the 3c509 network cards can be configured with the "auto" option
  
- `3c5x9cfg.exe` can be found at Ruprecht-Karls-Universität Heidelberg: [http://www.urz.uni-heidelberg.de/Netzdienste/nm/misc/3comnic/ ]
+ <tt>3c5x9cfg.exe</tt> can be found at Ruprecht-Karls-Universität Heidelberg: [http://www.urz.uni-heidelberg.de/Netzdienste/nm/misc/3comnic/ ]
  
  !FreeDOS can be found on: [http://www.freedos.org/ ]