[Nut-upsdev] Liebert ESP II driver

[Robert Jobbagy]

I know it,but I tried my ups On Battery with Liebert java app and when java
app shutdown PC and after shutdown UPS.
Later I plugin back the power and UPS started and after PC started automatic
too.
And I think NUT know it just I need configure NUT.

I read this instcmd :

shutdown.return          | Turn off the load possibly after a delay    |
   |                             | and return when power is back

but I didn't can use it.

And if I can send other shutdown command to UPS from this NUT function :

void upsdrv_shutdown(void)
{
        /* replace with a proper shutdown function */
        fatalx(EXIT_FAILURE, "shutdown not supported");
}

???
Is it help for me ?

Thanks your advice.



2010/7/15 Arjen de Korte <nut+devel at de-korte.org <nut%2Bdevel at de-korte.org>>

> Citeren Robert Jobbagy <jobbagy.robert at gmail.com>:
>
>  I tested my ups with liebert-esp2 driver and use it ON Battery and if ups
>> status will be LB then shutdown the PC but if power back
>> then PC stay power off.
>> How can I configure nut that if power back then PC start automatic ?
>>
>
> You can't. You'll have to configure the systems to boot up automatically
> when power is applied. This is usually done by either a setting in the
> system BIOS or (on older systems) a jumper on the main board. We can't help
> you with that, NUT doesn't have a magic finger that will press the power
> button for you.
>
>
> Best regards, Arjen
> --
> Please keep list traffic on the list
>
>
> _______________________________________________
> Nut-upsdev mailing list
> Nut-upsdev at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
>



-- 
Best Regards,

Robert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20100715/ee50344e/attachment-0001.htm>