<div dir="ltr"><div class="gmail_quote"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr">Cyber Power Systems AVRG750U</div><div dir="ltr"><a href="https://www.cyberpowersystems.com/product/ups/avrg750u/" target="_blank">https://www.cyberpowersystems.com/product/ups/avrg750u/</a><br></div><div dir="ltr"><br></div><div>upsc output:<br></div><div dir="ltr"><div style="margin-left:40px">battery.charge: 100<br>battery.charge.low: 10<br>battery.charge.warning: 20<br>battery.mfr.date: CPS<br>battery.runtime: 15360<br>battery.runtime.low: 300<br>battery.type: PbAcid<br>battery.voltage: 24.0<br>battery.voltage.nominal: 24<br>device.mfr: CPS<br>device.model: AVRG750U<br>device.serial: <REDACTED><br>device.type: ups<br><a href="http://driver.name" target="_blank">driver.name</a>: usbhid-ups<br>driver.parameter.offdelay: 60<br>driver.parameter.ondelay: 120<br>driver.parameter.pollfreq: 30<br>driver.parameter.pollinterval: 15<br>driver.parameter.port: auto<br>driver.parameter.productid: 0501<br>driver.parameter.synchronous: no<br>driver.parameter.vendorid: 0764<br>driver.version: 2.7.4<br>driver.version.data: CyberPower HID 0.4<br>driver.version.internal: 0.41<br>input.voltage: 121.0<br>input.voltage.nominal: 120<br>output.voltage: 129.0<br>ups.beeper.status: enabled<br>ups.delay.shutdown: 60<br>ups.delay.start: 120<br>ups.load: 2<br>ups.mfr: CPS<br>ups.model: AVRG750U<br>ups.productid: 0501<br>ups.realpower.nominal: 450<br>ups.serial: <REDACTED><br>ups.status: OL<br>ups.test.result: Done and passed<br>ups.timer.shutdown: -60<br>ups.timer.start: -60<br>ups.vendorid: 0764<br></div></div><div><br></div><div>upsrw output:</div><div style="margin-left:40px">[battery.charge.low]<br>Remaining battery level when UPS switches to LB (percent)<br>Type: STRING<br>Maximum length: 10<br>Value: 10<br><br>[battery.runtime.low]<br>Remaining battery runtime when UPS switches to LB (seconds)<br>Type: STRING<br>Maximum length: 10<br>Value: 300<br><br>[ups.delay.shutdown]<br>Interval to wait after shutdown with delay command (seconds)<br>Type: STRING<br>Maximum length: 10<br>Value: 120<br><br>[ups.delay.start]<br>Interval to wait before (re)starting the load (seconds)<br>Type: STRING<br>Maximum length: 10<br>Value: 180</div></div><div><br></div><div>upscmd output:</div><div style="margin-left:40px">beeper.disable - Disable the UPS beeper<br>beeper.enable - Enable the UPS beeper<br>beeper.mute - Temporarily mute the UPS beeper<br>beeper.off - Obsolete (use beeper.disable or beeper.mute)<br>beeper.on - Obsolete (use beeper.enable)<br>load.off - Turn off the load immediately<br>load.off.delay - Turn off the load with a delay (seconds)<br>load.on - Turn on the load immediately<br>load.on.delay - Turn on the load with a delay (seconds)<br>shutdown.return - Turn off the load and return when power is back<br>shutdown.stayoff - Turn off the load and remain off<br>shutdown.stop - Stop a shutdown in progress<br>test.battery.start.deep - Start a deep battery test<br>test.battery.start.quick - Start a quick battery test<br>test.battery.stop - Stop the battery test<br></div></div><div dir="ltr"><br></div><div>I have tested the shutdown sequence, and this device is affected by the Cyber Power Systems ondelay/offdelay bug, but otherwise, the sequence works to turn the power off, then back on when it detects line power.</div><div><br></div><div>Cheers,</div><div>X<br></div></div></div></div></div>
</div></div>