<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<div class="moz-cite-prefix">On 3/10/21 12:24 PM, Johnson-shen
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:47d55365-8c0e-b9d1-73fd-67fa5c6d14c1@ablerex.com.tw">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<div class="moz-cite-prefix">Dear Wolfy,</div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix">Please refer to the below table for
the whole support list of the UPS Model of the new driver.</div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix"><img
src="cid:part1.7BC1205D.D1F02E87@nobugconsulting.ro" alt=""
class=""></div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix">Please kindly advise me if you have
any questions.</div>
<div class="moz-cite-prefix"><br>
</div>
<div class="moz-cite-prefix">Regards!</div>
<div class="moz-cite-prefix">Johnson</div>
<div class="moz-cite-prefix"><br>
</div>
</blockquote>
<p>Well, I am curious, what does the new driver add ? Currently I am
using blazer_ser ( the UPS is connected to a RPI via a USB-RS232
adapter ). I assume based on the table above that the driver
targets only UPS models newer than mine ?</p>
<p>Here is the full output from my UPS:<br>
</p>
<p>[wolfy@wolfy ~]$ upsc ablerex@pi<br>
battery.charge: 100<br>
battery.voltage: 108.48<br>
battery.voltage.high: 104.00<br>
battery.voltage.low: 83.20<br>
battery.voltage.nominal: 96.0<br>
device.mfr: Ablerex<br>
device.model: MS3000RT<br>
device.type: ups<br>
driver.name: blazer_ser<br>
driver.parameter.pollinterval: 2<br>
driver.parameter.port: /dev/ttyUSB0<br>
driver.parameter.synchronous: no<br>
driver.version: 2.7.4<br>
driver.version.internal: 1.57<br>
input.current.nominal: 14.0<br>
input.frequency: 50.0<br>
input.frequency.nominal: 50<br>
input.voltage: 230.6<br>
input.voltage.fault: 190.0<br>
input.voltage.nominal: 220<br>
output.voltage: 220.0<br>
ups.beeper.status: disabled<br>
ups.delay.shutdown: 30<br>
ups.delay.start: 180<br>
ups.firmware: MS02035C<br>
ups.load: 43<br>
ups.mfr: Ablerex<br>
ups.model: MS3000RT<br>
ups.status: OL<br>
ups.temperature: 42.7<br>
ups.type: online<br>
<br>
</p>
</body>
</html>