<div dir="ltr"><div>Cheers all,</div><div><br></div><div>  I am experimenting with a Raspberry Pi, and it is fed from my PC (Debian-ish Linux) that is in turn protected by an UPS - so runs NUT.</div><div><br></div><div>  As far as the Pi is concerned, the bigger computer is its wall power source (provides the USB socket) and being a smart machine with NUT running, it could pose as an UPS itself. 
 That is, if the 
big 

computer is going to shut down (including probably rebooting, as I 
expect the motherboard to power-cycle its USB ports), it should issue 
FSD on some bare-bone driver *AND* wait for clients (like upsmon running on the Pi) to 
disconnect before proceeding with its own power-off/reboot.

</div><div><br></div><div>  Did anyone already solve something like this with a custom driver or smart use of dummy-ups vs. systemd, etc.? Probably not a hard puzzle, but still a fun one - and if someone has already navigated the hidden troubles and can share - so much the better :)</div><div><br></div><div>Jim Klimov<br></div><div><br></div></div>