[Nut-upsuser] usbhid-ups on openSUSE 10.3 does not see MGE Ellipse 1500

[Roger Price]

On Wed, 17 Oct 2007, Arjen de Korte wrote:

> > I applied the change, and the head of file /etc/udev/rules.d now says:
> >
> >    # udev rules for the NUT USB drivers
> >
> >    ACTION!="add", GOTO="nut-usbups_rules_end"
> >    SUBSYSTEM=="usb_device", GOTO="nut-usbups_rules_real"
> >    SUBSYSTEM=="usb", GOTO="nut-usbups_rules_real"
> >    BUS!="usb", GOTO="nut-usbups_rules_end"
> >
> >    LABEL="nut-usbups_rules_real"
> >
> >    # MGE UPS SYSTEMS - usbhid-ups
> >    SYSFS{idVendor}=="0463", .....
> >
> > Again I tried to start usbhid-ups but I still get:
> >
> > pastis:~ # /usr/lib/ups/driver/upsdrvctl -DDD start
> > Network UPS Tools - UPS driver controller 2.2.0-
> > Starting UPS: myups
> > exec: /usr/lib/ups/driver/usbhid-ups -a myups
> > Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.2.0-)
> >
> > No matching HID UPS found
> > Driver failed to start (exit status=1)
> 
> The change will not take effect until you replug the UPS. Otherwise, udev
> won't read them.

Sorry, I should have been clearer.  I replugged the UPS, but still got the 
same result.  I tried rebooting the system, but still got "No matching HID 
UPS found"

Best regards,
Roger