[Nut-upsuser] NUT with Cyber Power 700 AVR

[Arjen de Korte]

Citeren Thomas Jensen <tom.jensen op digitaltoolbox-inc.com>:

> server:#
> upsdrvctl start
>
> Network UPS Tools - UPS driver controller 2.2.2
>
> Network
> UPS Tools - CyberPower driver 1.00 (2.2.2)

Try running the powerpanel driver. The cyberpower driver is no longer  
maintained and has no provisions for debugging the communication with  
the UPS.

[server]
     driver = powerpanel
     port = /dev/ttyS0
     desc = "Server"

If this fails to detect the UPS, try running the *driver* in debug mode:

     /path/to/powerpanel -DDD -a server

The first 10 seconds worth of output might give a clue why it isn't  
working. After that you should kill it with Ctrl-C (otherwise it will  
keep spitting out debug information forever).

If this works, you'll probably want to upgrade to nut-2.4.1 (or  
better) since there have been some changes in the interpretation of  
the readings from the UPS since nut-2.2.2 was released almost two  
years ago.

Best regards, Arjen
-- 
Please keep list traffic on the list