[Nut-upsuser] Zigor Ebro 650 compatibility

[Chris Rees]

On 10 August 2012 18:08, Chris Rees <crees at freebsd.org> wrote:
> On 8 August 2012 10:07, Martyn Hill <martyn.joseph.hill at gmail.com> wrote:
>> Arnaud Quette <aquette.dev <at> gmail.com> writes:
>>> 2012/6/3 Chris Rees <crees <at> freebsd.org>:
>>> > Hi all,
>>>
>>> Hi Chris,
>>>
>>> > After some research I've found that this device should run with the
>>> > blazer_usb driver.
>>> >
>>> > Jun  3 16:15:38 pegasus kernel: ugen0.4: <vendor 0x0001> at usbus0
>>> > Jun  3 16:15:38 pegasus kernel: uhid0: <vendor 0x0001 product 0x0000,
>>> > class 0/0, rev 1.00/1.00, addr 4> on usbus0
>>> >
>>> > However, even after shoehorning it;
>>> >
>>> > [crees <at> pegasus]/usr/local/libexec/nut% sudo ./blazer_usb -a zigor
>>> > -DDDDDDDDD -x vendorid=0x0001 -x productid=0x0000 -x subdriver=krauler
>>> > Password:
>>> > Network UPS Tools - Megatec/Q1 protocol USB driver 0.04
>>> > (2.6.3-Unversioned directory)
>>> >   0.000000     send_to_all: SETINFO driver.parameter.vendorid "0x0001"
>>> >   0.000013     send_to_all: SETINFO driver.parameter.productid "0x0000"
>>> >   0.000018     send_to_all: SETINFO driver.parameter.subdriver "krauler"
>>> >   0.000020     debug level is '9'
>>> >   0.000874     language ID workaround enabled (using '0x409')
>>> >   0.001019     No appropriate HID device found
>>> >   0.001025     No supported devices found. Please check your device
>>> > availability with 'lsusb'
>>> > and make sure you have an up-to-date version of NUT. If this does not help,
>>> > try running the driver with at least 'subdriver', 'vendorid'
>> and 'productid'
>>> > options specified. Please refer to the man page for details about these
>> options
>>> > (man 8 blazer).
>>> >
>>> > This is on FreeBSD with NUT updated to 2.6.3 (I've modified the port).
>>> >
>>
>> Hi Chris
>>
>> Any chance you could share the FreeBSD port? Using the version (2.6.1)
>> currently available in the ports tree, I can get a step closer than your tests
>> above, but without the enhanced blazer_usb driver (0.0.4) in nut 2.6.3, I
>> don't think I can get any further.
>
> All you need to do is edit the PORTVERSION value in the Makefile, and
> run make makesum :)
>
> I've just successfully upgraded to 2.6.4 this way....
>
>>> > The UPS comes with UPSilon, but it's several years (!) old and I can't
>>> > even get it to install, let alone work.
>>> >
>>> > Have I sent enough info?  I'm willing to have a go at hacking the
>>> > driver, but having trouble getting started.
>>> >
>>> > Chris
>>> >
>>> > [crees <at> pegasus]/usr/local/libexec/nut% grep -v
>> ^# /usr/local/etc/nut/ups.conf
>>> >
>>> > [zigor]
>>> >        port = auto
>>> >        driver = blazer_usb
>>> >        langid_fix = 0x409
>>> >        desc = "Zigor UPS"
>>> >        vendorid = 0001
>>> >        productid = 0000
>>>
>>> it's quite probably due to a permission issue.
>>> See "4) Permissions" on
>> http://people.freebsd.org/~thierry/nut_FreeBSD_HowTo.txt
>
> Thanks Arnaud, and sorry for the delay-- I've been on holiday.
>
> As I mentioned above I've now got it to 2.6.4, and have a new message;
>
> [crees at pegasus]/usr/local/libexec/nut% sudo ./blazer_usb -a zigor -DDDDDDDDDDDDD
> Network UPS Tools - Megatec/Q1 protocol USB driver 0.08
> (2.6.4-Unversioned directory)
>    0.000000     debug level is '13'
>    0.001081     Checking device (0001/0000) (/dev/usb//dev/ugen2.3)
>    0.001688     - VendorID: 0001
>    0.001694     - ProductID: 0000
>    0.001697     - Manufacturer: unknown
>    0.001701     - Product: unknown
>    0.001705     - Serial Number: unknown
>    0.001708     - Bus: /dev/usb
>    0.001712     Trying to match device
>    0.001717     Device matches
>    0.001737     send_to_all: SETINFO ups.vendorid "0001"
>    0.001744     send_to_all: SETINFO ups.productid "0000"
>    0.001751     send_to_all: SETINFO device.type "ups"
>    0.001758     send_to_all: SETINFO driver.version "2.6.4-Unversioned
> directory"
>    0.001764     send_to_all: SETINFO driver.version.internal "0.08"
>    0.001770     send_to_all: SETINFO driver.name "blazer_usb"
>    0.001775     Trying megatec protocol...
>    0.001786     send: Q1
>    0.002191     read: Unknown error
>    0.002242     Permissions problem: Input/output error
> [crees at pegasus]/usr/local/libexec/nut%
>
> I had already chmod'd 777 all the USB nodes (just for debugging of course!)
>
> and:
>
> [crees at pegasus]/usr/local/libexec/nut% grep -v ^# /usr/local/etc/nut/ups.conf
> [zigor]
>         port = auto
>         driver = blazer_usb
>
> Looks as though the UPS is answering in strange ways....
>


Just for fun, I noticed the #ifdef TESTING in blazer_usb.c.

I defined that, and got this output when running ./blazer_usb -a zigor:

http://www.bayofrum.net/~crees/scratch/zigor-testing.txt

Any hints there?

Chris