[Nut-upsuser] NUT Installation Issue

[Charles Lepple]

On Oct 30, 2020, at 3:00 PM, bobby <architectofthefuture at gmail.com> wrote:
> 
> I installed NUT on my raspberry pi.  I've been following this tutorial: https://melgrubb.com/2016/12/11/rphs-v2-ups/.  I am trying to use NUT to monitor my cyberpower UPS. I seem to have this problem though: upsc cyberpower at localhost Init SSL without certificate database Error: Driver not connected
> Doing a status check on nut-server, I see the following: Can't connect to UPS [cyberpower] (usbhid-ups-cyberpower): No such file or directory

Just before starting nut-server (which needs to connect to a running driver), the article says to run "sudo upsdrvctl start". What did that return?

Also, for the benefit of others who come across this thread, please include a bit more detail on your setup. Since there's a good chance you're running Raspbian, you can probably get the NUT version with `dpkg -l nut-server`. 

> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at alioth-lists.debian.net
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser