[Nut-upsuser] failed after upgrade - upscode2: Missing UPCL after UPCL
Karl Schmidt
karl at lrak.net
Tue Jul 4 03:52:54 BST 2023
Upgraded to Debian bookworm - working nut system stopped working.
nut-server: Installed: 2.8.0-7
Trying :
/usr/lib/nut/upscode2 -a malaysia -DD
Network UPS Tools - UPScode II UPS driver 0.90 (2.8.0)
Warning: This is an experimental driver.
Some features may not function correctly.
0.000000 [D1] debug level is '2'
0.002302 tcgetattr(/dev/ttyUSB-nut): Inappropriate ioctl for device
Looks like two problems - the udev rule isn't working any more?
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", ATTRS{serial}=="AJV9MKOY", SYMLINK+="ttyUSB-nut",GROUP = "nut",
MODE="0666"
So I tried going straight to the device:
/usr/lib/nut/upscode2 -a malaysia -DDDD
This returns the following after a bit (Looks like it likes UPTP)..
] upscsend: 'UPTP'
1.857813 [D3] upscrecv: Empty line
1.921764 [D3] upscrecv: 5 bytes: 'NNAME'
2.097563 [D3] upscrecv: 20 bytes: 'UPS 2400 VA FW -0026'
2.097593 [D2] Got value: NNAME UPS 2400 VA FW -0026
So it IS talking to the UPS - but something above my knowledge is going wrong?
Here is a longer output tail..
/usr/lib/nut/upscode2 -a malaysia -DDDD
Network UPS Tools - UPScode II UPS driver 0.90 (2.8.0)
Warning: This is an experimental driver.
Some features may not function correctly.
0.000000 [D1] debug level is '4'
0.002995 [D1] input_timeout = 2 Sec
0.003002 [D1] output_pace = 200 uSec
0.003007 [D1] full_update_timer = 60 Sec
0.003011 [D1] use_crlf = 0
0.003016 [D1] use_pre_lf = 0
0.004308 [D3] upscsend: 'UPCL'
0.217722 [D3] upscrecv: Empty line
0.265688 [D3] upscrecv: 4 bytes: 'UPSS'
0.265717 [D2] Supports command: UPSS
0.313620 [D3] upscrecv: 4 bytes: 'UPDS'
0.313649 [D2] Supports command: UPDS
0.361570 [D3] upscrecv: 4 bytes: 'UPDV'
0.361599 [D2] Supports command: UPDV
0.409520 [D3] upscrecv: 4 bytes: 'UPTP'
0.409549 [D2] Supports command: UPTP
0.457471 [D3] upscrecv: 4 bytes: 'UPSN'
0.457500 [D2] Supports command: UPSN
0.505436 [D3] upscrecv: 4 bytes: 'UPPN'
0.505465 [D2] Supports command: UPPN
0.569393 [D3] upscrecv: 4 bytes: 'UPSD'
0.569421 [D2] Supports command: UPSD
0.569437 [D1] setvar: ups.delay.shutdown UPSD
0.617343 [D3] upscrecv: 4 bytes: 'UPCD'
0.617372 [D2] Supports command: UPCD
0.617387 [D1] setvar: ups.delay.reboot UPCD
0.665290 [D3] upscrecv: 4 bytes: 'UPPC'
0.665319 [D2] Supports command: UPPC
0.665334 [D1] instcmd: shutdown.reboot UPPC
0.713264 [D3] upscrecv: 4 bytes: 'UPPU'
0.713293 [D2] Supports command: UPPU
0.713307 [D1] instcmd: shutdown.stop UPPU
0.761218 [D3] upscrecv: 4 bytes: 'UPIS'
0.761247 [D2] Supports command: UPIS
0.761262 [D1] instcmd: test.panel.start UPIS
0.809167 [D3] upscrecv: 4 bytes: 'UP??'
0.809197 [D2] Supports command: UP??
0.857112 [D3] upscrecv: 4 bytes: 'UPEA'
0.857141 [D2] Supports command: UPEA
0.905089 [D3] upscrecv: 4 bytes: 'UPDA'
0.905119 [D2] Supports command: UPDA
0.953091 [D3] upscrecv: 4 bytes: 'UPCL'
0.953120 [D2] Supports command: UPCL
0.953135 [D2] Request value: UPCD 0000
0.954763 [D3] upscsend: 'UPCD'
0.956318 [D3] upscsend: '0000'
2.958427 [D3] upscrecv: Timeout
4.960535 [D3] upscrecv: Timeout
4.960566 [D2] Got value:
4.960580 Bad response to UPCD 0000:
4.960596 dstate_setflags: base variable (ups.delay.reboot) does not exist
4.960609 dstate_setaux: base variable (ups.delay.reboot) does not exist
4.960624 [D2] Request value: UPSD 0000
4.962217 [D3] upscsend: 'UPSD'
4.963805 [D3] upscsend: '0000'
5.089317 [D3] upscrecv: Empty line
5.201214 [D3] upscrecv: 4 bytes: 'ACSD'
5.313141 [D3] upscrecv: 3 bytes: '000'
5.313177 [D2] Got value: ACSD 000
5.313221 [D2] Request value: UPTP ""
5.314826 [D3] upscsend: 'UPTP'
5.512984 [D3] upscrecv: Empty line
5.560909 [D3] upscrecv: 5 bytes: 'NNAME'
5.752764 [D3] upscrecv: 20 bytes: 'UPS 2400 VA FW -0026'
5.752794 [D2] Got value: NNAME UPS 2400 VA FW -0026
5.752817 [D2] Request value: UPSN 0
5.754297 [D3] upscsend: 'UPSN'
5.754904 [D3] upscsend: '0'
5.856693 [D3] upscrecv: Empty line
5.904642 [D3] upscrecv: 4 bytes: 'ACSN'
6.080517 [D3] upscrecv: 20 bytes: 'LR204A996 '
6.080547 [D2] Got value: ACSN LR204A996
6.082104 [D3] upscsend: 'UPDA'
6.082125 [D1] Setvar: ups.delay.shutdown 10
6.082140 [D2] Request value: UPSD 10
6.083732 [D3] upscsend: 'UPSD'
6.084665 [D3] upscsend: '10'
8.086750 [D3] upscrecv: Timeout
10.088837 [D3] upscrecv: Timeout
10.088870 [D2] Got value:
10.088885 Bad response to UPSD 10:
10.088899 [D1] Setvar: ups.delay.reboot 60
10.088914 [D2] Request value: UPCD 60
10.090447 [D3] upscsend: 'UPCD'
10.091381 [D3] upscsend: '60'
10.216917 [D3] upscrecv: Empty line
10.664514 [D3] upscrecv: 4 bytes: 'ACCD'
10.776416 [D3] upscrecv: 3 bytes: '060'
10.776446 [D2] Got value: ACCD 060
10.778032 [D3] upscsend: 'UPDS'
10.879313 [D3] upscrecv: Empty line
10.927264 [D3] upscrecv: 4 bytes: 'STOK'
10.975240 [D3] upscrecv: 2 bytes: '00'
10.975271 [D2] Parameter STOK 00
10.975286 [D3] Ignored value: STOK 00
11.023214 [D3] upscrecv: 4 bytes: 'STBO'
11.055157 [D3] upscrecv: 2 bytes: '00'
11.055188 [D2] Parameter STBO 00
11.103112 [D3] upscrecv: 4 bytes: 'STBL'
11.135092 [D3] upscrecv: 2 bytes: '00'
11.135123 [D2] Parameter STBL 00
11.183039 [D3] upscrecv: 4 bytes: 'STBM'
11.247011 [D3] upscrecv: 2 bytes: 'RS'
11.247042 [D2] Parameter STBM RS
11.247057 [D3] Ignored value: STBM RS
11.294911 [D3] upscrecv: 4 bytes: 'STLR'
11.326885 [D3] upscrecv: 2 bytes: 'NO'
11.326917 [D2] Parameter STLR NO
11.326933 [D3] Ignored value: NO 11
11.438776 [D3] upscrecv: 5 bytes: 'BTIME'
11.550705 [D3] upscrecv: 7 bytes: '0044.00'
11.550736 [D2] Parameter BTIME 0044.00
11.630638 [D3] upscrecv: 5 bytes: 'MIUL1'
11.710552 [D3] upscrecv: 7 bytes: '0123.00'
11.710583 [D2] Parameter MIUL1 0123.00
11.758512 [D3] upscrecv: 5 bytes: 'MBUUU'
11.854411 [D3] upscrecv: 7 bytes: '0052.40'
11.854442 [D2] Parameter MBUUU 0052.40
11.934326 [D3] upscrecv: 5 bytes: 'MOUL1'
12.030259 [D3] upscrecv: 7 bytes: '0123.00'
12.030292 [D2] Parameter MOUL1 0123.00
12.110180 [D3] upscrecv: 5 bytes: 'MOIL1'
12.190129 [D3] upscrecv: 7 bytes: '0001.61'
12.190160 [D2] Parameter MOIL1 0001.61
12.318027 [D3] upscrecv: 5 bytes: 'MOPL1'
12.445896 [D3] upscrecv: 7 bytes: '0000.14'
12.445927 [D2] Parameter MOPL1 0000.14
12.493846 [D3] upscrecv: 5 bytes: 'MOSL1'
12.573801 [D3] upscrecv: 7 bytes: '0000.19'
12.573833 [D2] Parameter MOSL1 0000.19
12.637719 [D3] upscrecv: 5 bytes: 'MOFFF'
12.701675 [D3] upscrecv: 7 bytes: '0060.00'
12.701707 [D2] Parameter MOFFF 0060.00
12.703253 [D3] upscsend: 'UPDV'
12.997414 [D3] upscrecv: Empty line
13.045369 [D3] upscrecv: 5 bytes: 'NIUNN'
13.125288 [D3] upscrecv: 7 bytes: '0120.00'
13.125320 [D2] Parameter NIUNN 0120.00
13.173272 [D3] upscrecv: 5 bytes: 'NIUHH'
13.253195 [D3] upscrecv: 7 bytes: '0145.00'
13.253227 [D2] Parameter NIUHH 0145.00
13.317124 [D3] upscrecv: 5 bytes: 'NIULL'
13.381064 [D3] upscrecv: 7 bytes: '0084.00'
13.381096 [D2] Parameter NIULL 0084.00
13.444995 [D3] upscrecv: 5 bytes: 'NBUNN'
13.508999 [D3] upscrecv: 7 bytes: '0048.00'
13.509031 [D2] Parameter NBUNN 0048.00
13.572871 [D3] upscrecv: 5 bytes: 'NBUHH'
13.652790 [D3] upscrecv: 7 bytes: '0056.40'
13.652822 [D2] Parameter NBUHH 0056.40
13.700718 [D3] upscrecv: 5 bytes: 'NBULL'
13.780646 [D3] upscrecv: 7 bytes: '0040.00'
13.780678 [D2] Parameter NBULL 0040.00
13.828610 [D3] upscrecv: 5 bytes: 'NBAHN'
13.908534 [D3] upscrecv: 7 bytes: '0017.00'
13.908565 [D2] Parameter NBAHN 0017.00
13.972466 [D3] upscrecv: 5 bytes: 'NOUNN'
14.036388 [D3] upscrecv: 7 bytes: '0120.00'
14.036420 [D2] Parameter NOUNN 0120.00
14.100339 [D3] upscrecv: 5 bytes: 'NOUHH'
14.164293 [D3] upscrecv: 7 bytes: '0128.00'
14.164325 [D2] Parameter NOUHH 0128.00
14.228232 [D3] upscrecv: 5 bytes: 'NOULL'
14.308156 [D3] upscrecv: 7 bytes: '0108.00'
14.308187 [D2] Parameter NOULL 0108.00
14.372081 [D3] upscrecv: 5 bytes: 'NOINN'
14.436035 [D3] upscrecv: 7 bytes: '0020.00'
14.436066 [D2] Parameter NOINN 0020.00
14.499991 [D3] upscrecv: 5 bytes: 'NOIHH'
14.563980 [D3] upscrecv: 7 bytes: '0022.80'
14.564012 [D2] Parameter NOIHH 0022.80
14.627857 [D3] upscrecv: 5 bytes: 'NOPNN'
14.707804 [D3] upscrecv: 7 bytes: '0001.60'
14.707835 [D2] Parameter NOPNN 0001.60
14.755763 [D3] upscrecv: 5 bytes: 'NOSNN'
14.835705 [D3] upscrecv: 7 bytes: '0002.40'
14.835737 [D2] Parameter NOSNN 0002.40
14.883676 [D3] upscrecv: 5 bytes: 'NOFHH'
14.979582 [D3] upscrecv: 7 bytes: '0063.00'
14.979614 [D2] Parameter NOFHH 0063.00
15.027550 [D3] upscrecv: 5 bytes: 'NOFLL'
15.107450 [D3] upscrecv: 7 bytes: '0057.00'
15.107481 [D2] Parameter NOFLL 0057.00
15.107536 [D2] ups.load: 8.1
15.107666 [D2] dstate_init: sock /run/nut/upscode2-malaysia open on fd 5
15.109232 [D3] upscsend: 'UPDS'
15.210376 [D3] upscrecv: Empty line
15.258350 [D3] upscrecv: 4 bytes: 'STOK'
15.306305 [D3] upscrecv: 2 bytes: '00'
15.306336 [D2] Parameter STOK 00
15.306352 [D3] Ignored value: STOK 00
15.354256 [D3] upscrecv: 4 bytes: 'STBO'
15.386220 [D3] upscrecv: 2 bytes: '00'
15.386255 [D2] Parameter STBO 00
15.434171 [D3] upscrecv: 4 bytes: 'STBL'
15.466145 [D3] upscrecv: 2 bytes: '00'
15.466176 [D2] Parameter STBL 00
15.514102 [D3] upscrecv: 4 bytes: 'STBM'
15.578049 [D3] upscrecv: 2 bytes: 'RS'
15.578080 [D2] Parameter STBM RS
15.578095 [D3] Ignored value: STBM RS
15.625999 [D3] upscrecv: 4 bytes: 'STLR'
15.673979 [D3] upscrecv: 2 bytes: 'NO'
15.674011 [D2] Parameter STLR NO
15.674026 [D3] Ignored value: NO 11
15.769877 [D3] upscrecv: 5 bytes: 'BTIME'
15.881803 [D3] upscrecv: 7 bytes: '0044.00'
15.881834 [D2] Parameter BTIME 0044.00
15.961721 [D3] upscrecv: 5 bytes: 'MIUL1'
16.041667 [D3] upscrecv: 7 bytes: '0123.00'
16.041699 [D2] Parameter MIUL1 0123.00
16.089620 [D3] upscrecv: 5 bytes: 'MBUUU'
16.185517 [D3] upscrecv: 7 bytes: '0052.40'
16.185548 [D2] Parameter MBUUU 0052.40
16.265414 [D3] upscrecv: 5 bytes: 'MOUL1'
16.361340 [D3] upscrecv: 7 bytes: '0123.00'
16.361371 [D2] Parameter MOUL1 0123.00
16.441295 [D3] upscrecv: 5 bytes: 'MOIL1'
16.521219 [D3] upscrecv: 7 bytes: '0001.61'
16.521250 [D2] Parameter MOIL1 0001.61
16.649089 [D3] upscrecv: 5 bytes: 'MOPL1'
16.776990 [D3] upscrecv: 7 bytes: '0000.14'
16.777021 [D2] Parameter MOPL1 0000.14
16.840963 [D3] upscrecv: 5 bytes: 'MOSL1'
16.904897 [D3] upscrecv: 7 bytes: '0000.19'
16.904928 [D2] Parameter MOSL1 0000.19
16.968835 [D3] upscrecv: 5 bytes: 'MOFFF'
17.048768 [D3] upscrecv: 7 bytes: '0060.00'
17.048800 [D2] Parameter MOFFF 0060.00
17.048843 [D2] ups.load: 8.1
17.109379 [D3] upscsend: 'UPDS'
17.211638 [D3] upscrecv: Empty line
17.259590 [D3] upscrecv: 4 bytes: 'STOK'
17.307555 [D3] upscrecv: 2 bytes: '00'
17.307586 [D2] Parameter STOK 00
17.307602 [D3] Ignored value: STOK 00
17.355513 [D3] upscrecv: 4 bytes: 'STBO'
17.387488 [D3] upscrecv: 2 bytes: '00'
17.387520 [D2] Parameter STBO 00
17.435441 [D3] upscrecv: 4 bytes: 'STBL'
17.467414 [D3] upscrecv: 2 bytes: '00'
17.467445 [D2] Parameter STBL 00
17.515380 [D3] upscrecv: 4 bytes: 'STBM'
17.579312 [D3] upscrecv: 2 bytes: 'RS'
17.579343 [D2] Parameter STBM RS
17.579359 [D3] Ignored value: STBM RS
17.627263 [D3] upscrecv: 4 bytes: 'STLR'
17.659249 [D3] upscrecv: 2 bytes: 'NO'
17.659280 [D2] Parameter STLR NO
17.659296 [D3] Ignored value: NO 11
17.771136 [D3] upscrecv: 5 bytes: 'BTIME'
17.883029 [D3] upscrecv: 7 bytes: '0044.00'
17.883061 [D2] Parameter BTIME 0044.00
17.962979 [D3] upscrecv: 5 bytes: 'MIUL1'
18.042958 [D3] upscrecv: 7 bytes: '0122.90'
18.042990 [D2] Parameter MIUL1 0122.90
18.090962 [D3] upscrecv: 5 bytes: 'MBUUU'
18.186809 [D3] upscrecv: 7 bytes: '0052.40'
18.186840 [D2] Parameter MBUUU 0052.40
18.266757 [D3] upscrecv: 5 bytes: 'MOUL1'
18.362674 [D3] upscrecv: 7 bytes: '0122.90'
18.362705 [D2] Parameter MOUL1 0122.90
18.442624 [D3] upscrecv: 5 bytes: 'MOIL1'
18.522581 [D3] upscrecv: 7 bytes: '0001.61'
18.522613 [D2] Parameter MOIL1 0001.61
18.650481 [D3] upscrecv: 5 bytes: 'MOPL1'
18.778378 [D3] upscrecv: 7 bytes: '0000.14'
18.778409 [D2] Parameter MOPL1 0000.14
18.842321 [D3] upscrecv: 5 bytes: 'MOSL1'
18.906289 [D3] upscrecv: 7 bytes: '0000.19'
18.906321 [D2] Parameter MOSL1 0000.19
18.970249 [D3] upscrecv: 5 bytes: 'MOFFF'
19.034175 [D3] upscrecv: 7 bytes: '0060.00'
19.034237 [D2] Parameter MOFFF 0060.00
19.034282 [D2] ups.load: 8.1
19.109547 [D3] upscsend: 'UPDS'
19.210993 [D3] upscrecv: Empty line
19.258968 [D3] upscrecv: 4 bytes: 'STOK'
19.306942 [D3] upscrecv: 2 bytes: '00'
19.306974 [D2] Parameter STOK 00
19.306989 [D3] Ignored value: STOK 00
19.354951 [D3] upscrecv: 4 bytes: 'STBO'
19.386848 [D3] upscrecv: 2 bytes: '00'
19.386879 [D2] Parameter STBO 00
19.434847 [D3] upscrecv: 4 bytes: 'STBL'
19.466816 [D3] upscrecv: 2 bytes: '00'
19.466848 [D2] Parameter STBL 00
19.514772 [D3] upscrecv: 4 bytes: 'STBM'
19.578715 [D3] upscrecv: 2 bytes: 'RS'
19.578745 [D2] Parameter STBM RS
19.578761 [D3] Ignored value: STBM RS
19.626684 [D3] upscrecv: 4 bytes: 'STLR'
19.658646 [D3] upscrecv: 2 bytes: 'NO'
19.658677 [D2] Parameter STLR NO
19.658693 [D3] Ignored value: NO 11
19.770573 [D3] upscrecv: 5 bytes: 'BTIME'
19.882444 [D3] upscrecv: 7 bytes: '0044.00'
19.882476 [D2] Parameter BTIME 0044.00
19.962369 [D3] upscrecv: 5 bytes: 'MIUL1'
20.042297 [D3] upscrecv: 7 bytes: '0122.80'
20.042329 [D2] Parameter MIUL1 0122.80
20.090245 [D3] upscrecv: 5 bytes: 'MBUUU'
20.186167 [D3] upscrecv: 7 bytes: '0052.40'
20.186231 [D2] Parameter MBUUU 0052.40
20.266130 [D3] upscrecv: 5 bytes: 'MOUL1'
20.362041 [D3] upscrecv: 7 bytes: '0122.80'
20.362072 [D2] Parameter MOUL1 0122.80
20.441966 [D3] upscrecv: 5 bytes: 'MOIL1'
20.521933 [D3] upscrecv: 7 bytes: '0001.61'
20.521963 [D2] Parameter MOIL1 0001.61
20.649756 [D3] upscrecv: 5 bytes: 'MOPL1'
20.777607 [D3] upscrecv: 7 bytes: '0000.14'
20.777638 [D2] Parameter MOPL1 0000.14
20.825556 [D3] upscrecv: 5 bytes: 'MOSL1'
20.905456 [D3] upscrecv: 7 bytes: '0000.19'
20.905487 [D2] Parameter MOSL1 0000.19
20.969405 [D3] upscrecv: 5 bytes: 'MOFFF'
21.033378 [D3] upscrecv: 7 bytes: '0060.00'
21.033410 [D2] Parameter MOFFF 0060.00
21.033452 [D2] ups.load: 8.1
21.109675 [D3] upscsend: 'UPDS'
21.211208 [D3] upscrecv: Empty line
21.259161 [D3] upscrecv: 4 bytes: 'STOK'
21.307134 [D3] upscrecv: 2 bytes: '00'
21.307165 [D2] Parameter STOK 00
21.307181 [D3] Ignored value: STOK 00
21.355107 [D3] upscrecv: 4 bytes: 'STBO'
21.387063 [D3] upscrecv: 2 bytes: '00'
21.387095 [D2] Parameter STBO 00
21.435034 [D3] upscrecv: 4 bytes: 'STBL'
21.467030 [D3] upscrecv: 2 bytes: '00'
21.467061 [D2] Parameter STBL 00
21.515006 [D3] upscrecv: 4 bytes: 'STBM'
21.578958 [D3] upscrecv: 2 bytes: 'RS'
21.578990 [D2] Parameter STBM RS
21.579005 [D3] Ignored value: STBM RS
21.626930 [D3] upscrecv: 4 bytes: 'STLR'
21.658933 [D3] upscrecv: 2 bytes: 'NO'
21.658964 [D2] Parameter STLR NO
21.658980 [D3] Ignored value: NO 11
21.770804 [D3] upscrecv: 5 bytes: 'BTIME'
21.882679 [D3] upscrecv: 7 bytes: '0044.00'
21.882710 [D2] Parameter BTIME 0044.00
21.962630 [D3] upscrecv: 5 bytes: 'MIUL1'
22.042523 [D3] upscrecv: 7 bytes: '0122.70'
22.042555 [D2] Parameter MIUL1 0122.70
22.090496 [D3] upscrecv: 5 bytes: 'MBUUU'
22.186404 [D3] upscrecv: 7 bytes: '0052.40'
22.186435 [D2] Parameter MBUUU 0052.40
22.266327 [D3] upscrecv: 5 bytes: 'MOUL1'
22.362259 [D3] upscrecv: 7 bytes: '0122.70'
22.362291 [D2] Parameter MOUL1 0122.70
22.442178 [D3] upscrecv: 5 bytes: 'MOIL1'
22.522100 [D3] upscrecv: 7 bytes: '0001.61'
22.522131 [D2] Parameter MOIL1 0001.61
22.650010 [D3] upscrecv: 5 bytes: 'MOPL1'
22.777925 [D3] upscrecv: 7 bytes: '0000.14'
22.777956 [D2] Parameter MOPL1 0000.14
22.825840 [D3] upscrecv: 5 bytes: 'MOSL1'
22.905771 [D3] upscrecv: 7 bytes: '0000.19'
22.905803 [D2] Parameter MOSL1 0000.19
22.969722 [D3] upscrecv: 5 bytes: 'MOFFF'
23.033673 [D3] upscrecv: 7 bytes: '0060.00'
23.033705 [D2] Parameter MOFFF 0060.00
23.033748 [D2] ups.load: 8.1
23.109839 [D3] upscsend: 'UPDS'
23.211517 [D3] upscrecv: Empty line
23.259472 [D3] upscrecv: 4 bytes: 'STOK'
23.307419 [D3] upscrecv: 2 bytes: '00'
23.307450 [D2] Parameter STOK 00
23.307465 [D3] Ignored value: STOK 00
23.355368 [D3] upscrecv: 4 bytes: 'STBO'
23.387348 [D3] upscrecv: 2 bytes: '00'
23.387378 [D2] Parameter STBO 00
23.435293 [D3] upscrecv: 4 bytes: 'STBL'
23.467300 [D3] upscrecv: 2 bytes: '00'
23.467332 [D2] Parameter STBL 00
23.515242 [D3] upscrecv: 4 bytes: 'STBM'
23.579192 [D3] upscrecv: 2 bytes: 'RS'
23.579223 [D2] Parameter STBM RS
23.579238 [D3] Ignored value: STBM RS
23.627141 [D3] upscrecv: 4 bytes: 'STLR'
23.659116 [D3] upscrecv: 2 bytes: 'NO'
23.659146 [D2] Parameter STLR NO
23.659162 [D3] Ignored value: NO 11
23.771015 [D3] upscrecv: 5 bytes: 'BTIME'
23.882913 [D3] upscrecv: 7 bytes: '0044.00'
23.882945 [D2] Parameter BTIME 0044.00
23.962838 [D3] upscrecv: 5 bytes: 'MIUL1'
24.042766 [D3] upscrecv: 7 bytes: '0122.90'
24.042798 [D2] Parameter MIUL1 0122.90
24.090688 [D3] upscrecv: 5 bytes: 'MBUUU'
24.186636 [D3] upscrecv: 7 bytes: '0052.40'
24.186668 [D2] Parameter MBUUU 0052.40
24.266579 [D3] upscrecv: 5 bytes: 'MOUL1'
24.362485 [D3] upscrecv: 7 bytes: '0122.90'
24.362517 [D2] Parameter MOUL1 0122.90
24.442409 [D3] upscrecv: 5 bytes: 'MOIL1'
24.522328 [D3] upscrecv: 7 bytes: '0001.61'
24.522359 [D2] Parameter MOIL1 0001.61
24.650229 [D3] upscrecv: 5 bytes: 'MOPL1'
24.778081 [D3] upscrecv: 7 bytes: '0000.14'
24.778112 [D2] Parameter MOPL1 0000.14
24.826025 [D3] upscrecv: 5 bytes: 'MOSL1'
24.905956 [D3] upscrecv: 7 bytes: '0000.19'
24.905987 [D2] Parameter MOSL1 0000.19
24.969900 [D3] upscrecv: 5 bytes: 'MOFFF'
25.033908 [D3] upscrecv: 7 bytes: '0060.00'
25.033940 [D2] Parameter MOFFF 0060.00
25.033983 [D2] ups.load: 8.1
25.109986 [D3] upscsend: 'UPDS'
------------->%-------------------------------------------
From ups.conf
user = nut
maxretry = 3
[malaysia]
# driver = usbhid-ups
# port = auto
# port = /dev/usb/hiddev0
# desc = "Triplite SU1500xl"
driver = upscode2
# port = /dev/ttyUSB-nut
port = /dev/ttyUSB0
manufacturer=Exide
# baudrate=1200
## input_timeout=30
# full_update_timer=60
## pollinterval=4
desc="Exide PCR2400"
#Acceptable values for this driver:
# manufacturer [unknown] : -x manufacturer=<value>
# Serial interface baudrate [1200] : -x baudrate=<value>
# Command response timeout [2] : -x input_timeout=<value>
# Output character delay in usecs [200] : -x output_pace=<value>
# Delay between full value downloads [60] : -x full_update=<value>
# Use CR-LF to terminate commands to UPS : -x use_crlf
# Use LF to introduce commands to UPS : -x use_pre_lf
#KPS - persistant name from usb-serial converter - see /etc/udev/rules.d/52_nut-serialups.rules
# Set maxretry to 3 by default, this should mitigate race with slow devices:
root at malaysia:~#
--
--------------------------------------------------------------------------------
Karl Schmidt EMail karl at lrak.net
3209 West 9th Street Ph (785) 841-3089
Lawrence, KS 66049
If the government is allowed to break the law during emergencies,
They will create emergencies to break the law.
?
--------------------------------------------------------------------------------
More information about the Nut-upsuser
mailing list