<div dir="ltr">Hi Users NUT,<div><br></div><div>I want monitor a UPS of brand SMS (Sinus Double 8 KVA) using a raspberry-pi. In compatibility list, is listed to use the blazer_ser driver. I use a USB adapter to RS-232 conected in to the No-Breake. Follow the comands e confs.</div><div><br></div><div>root@rasp:/home/pi# lsusb<br><b>Bus 001 Device 004: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port</b><br>Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter<br>Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub<br>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub<br></div><div><br></div><div>The description of equipment don't appear.</div><div><br></div><div>In the ups.conf, i used the follow lines.</div><div><br></div><div>[ups]<br>        driver = blazer_ser<br>        port = /dev/ttyUSB0 <br>        desc = "SMS 8 KVA"<br></div><div><br></div><div><br></div><div>When start the process by the nut, i received a Error message:</div><div><br></div><div>root@rasp:/etc/nut# upsdrvctl start<br>Network UPS Tools - UPS driver controller 2.7.4<br>Network UPS Tools - Megatec/Q1 protocol serial driver 1.57 (2.7.4)<br>No supported UPS detected<br>Driver failed to start (exit status=1)<br></div><div><br></div><div><br></div><div>Somebody could help me to accomplish the monitoring.</div><div><br></div><div><br></div><div>Regards.</div><div><br></div></div>