<div dir="ltr">I have three APC SmartUPS 5000s. Two of them are AP9617 and one is AP9619.<div><br></div><div>I have a RS-232 connections from my monitor host to all three. All three report status and give information.</div><div><br></div><div>One of the two AP9617 - ups3-1 - does not shut down when FSD is sent. It did when I first set this system up a year or two ago but it's stopped doing so since then. Resetting the management interface does not change anything.</div><div><br></div><div>This is all that shows up in /var/log/messages on the host that is connected to the UPSs and running the full NUT suite:</div><div>Dec 25 08:00:26 [redacted] upsd[9800]: Client upsmon@[redacted] set FSD on UPS [ups1-1]<br>Dec 25 08:00:26 [redacted] upsd: Client upsmon@[redacted] set FSD on UPS [ups1-1]<br>Dec 25 08:00:26 [redacted] upsd: Client upsmon@[redacted] set FSD on UPS [ups2-1]<br>Dec 25 08:00:26 [redacted] upsd: Client upsmon@[redacted] set FSD on UPS [ups3-1]<br>Dec 25 08:00:26 [redacted] upsd[9800]: Client upsmon@[redacted] set FSD on UPS [ups2-1]<br>Dec 25 08:00:26 [redacted] upsd[9800]: Client upsmon@[redacted] set FSD on UPS [ups3-1]</div><div><br></div><div>The other two do shut down... most of the time. I've now observed two occasions in the past 6 months where none of them do so.</div><div><br></div><div>All three UPSs report the same Application module and APC OS.:</div><div><br></div><div>Application Module<br>Name:     sumx<br>Version:  v3.7.2<br>Date:   02/02/2010<br>Time:       19:08:16<br><br>APC OS (AOS)<br>Name: aos<br>Version:   v3.7.3<br>Date:   02/02/2010<br>Time:       17:05:14<br></div><div><br></div><div>Yes, these are old UPSs and I've requested money to replace ups3-1. Of course, that won't help if NUT doesn't shut down any of them.</div><div><br></div><div>Any advice would be appreciated.</div><div><br></div><div>thanks,</div><div>nomad</div></div>