<div dir="auto">Hi,<div dir="auto">I create a script to build a file for the dummy-ups to simulate an UPS from other two in redundant mode for devices that allows monitoring only one UPS.</div><div dir="auto"><br></div><div dir="auto">The diagram:</div><div dir="auto"><a href="https://imgur.com/a/z4ZUuNw">https://imgur.com/a/z4ZUuNw</a></div><div dir="auto"><br></div><div dir="auto">I made some configurations that I put here:</div><div dir="auto"><a href="https://pastebin.com/yiQ1ju10">https://pastebin.com/yiQ1ju10</a></div><div dir="auto"><br></div><div dir="auto">Can you look at them and tell me if it can works before I try physically?</div><div dir="auto">Just saw an error on upsmon.conf where I put a symbolic IP address for the two UPSes but I must put the name in ups.conf instead.</div><div dir="auto"><br></div><div dir="auto">My doubts are in upsmon.conf where I defined a custom script to be called on NOTIFYCMD and I don't know if now the upssched will be called anyway by NUT.</div><div dir="auto">I don't know if upssched is needed to power off the UPSes.</div><div dir="auto"><br></div><div dir="auto">Then in upsd.conf should I put the static IP other than 127.0.0.1?</div><div dir="auto"><br></div><div dir="auto">There is also a <a href="http://dummy.dev">dummy.dev</a> file with default values to be sure that the dummy ups can read something even before the start of the script.</div><div dir="auto"><br></div></div>