<div dir="ltr"><div>Hello,</div><div><br></div><div>First of all, I'd like to compliment NUT on having great documentation and hardware support!<br></div><div><br></div><div>My issue:<br></div><div>I am running Proxmox 6.3-3 with NUT 2.7.4-8 which was installed via apt package.  It is connected as a secondary through a TrueNAS NUT primary that is directly attached to an Eaton 5P750 UPS via USB.<br></div><div><br></div><div>My configuration is mostly default settings, but HOSTSYNC is set to 120.</div><div><br></div><div>When I trigger a shutdown event on the primary with `upsmon -c fsd`, I can see that Proxmox correctly receives the FSD signal and starts shutting down.  It takes a long time (~50 seconds) to shut down the guest VM's hosted on Proxmox, though, and the process is interrupted by the power being "cut."  Really, since I'm only manually triggering the FSD and this isn't a real power outage, the power cut is merely assumed when the primary fully shuts down.</div><div><br></div><div>Why is this happening?  Shouldn't NUT somehow know that VM's on Proxmox are still shutting down, and not disconnect from the primary until it's very close to the end of the shutdown process?</div><div><br></div><div>Is it possible that the NUT package on Proxmox does not have dependencies to other services set correctly, i.e. the NUT service/unit should depend on the VM shutdown unit, but it doesn't?</div><div><br></div><div>As a side note in case it's related, NUT's user authentication does not seem to be enforced in my system.  I can change the password to something erroneous for the Proxmox's NUT upsmon user, but it can still access the NUT primary, which is unexpected.  I expect it to get denied access, but it's not.</div><div><br></div><div>Thanks for any help you can provide!</div></div>