<div dir="ltr"><div>Hello and welcome,</div><div><br></div><div>  Can you please point to any online "PiNUT" docs, if that is a project name? I did not find anything that looked specific to the key word.</div><div><br></div><div>  In any case, the "primary" role of upsmon applies to any UPS that it is connected to and can directly manage, so in case of a power outage it tells everyone else (secondaries) to shut down first, and then runs the UPS driver program in its own shutdown hook to tell the UPS to turn off and power-cycle when power comes back.</div><div><br></div><div>  Note that the NUT-protected system can be fed by several UPSes either natively (has many power supply units - PSUs - built in) or through an ATS/STS which is fed from several sources and feeds one PSU of the server. This is where MINSUPPLIES value comes in - how many healthy PSUs are enough for this machine to not worry, and "powervalue" in MONITOR lines for each UPS (how many PSUs of this system that UPS feeds).</div><div><br></div><div>  In your case, both "MINSUPPLIES" and the "powervalue" of UPSA in the `upsmon.conf` on the Pi would be 1, and 
"powervalue" of 

other UPSes would be 0 (monitored only for curiosity/logging/...) while it is still a "primary" for all 3 (can tell others about FSD).</div><div><br></div>Hope this helps,<div>Jim Klimov</div><div><br></div></div><br><div class="gmail_quote gmail_quote_container"><div dir="ltr" class="gmail_attr">On Sun, Mar 30, 2025 at 1:07 PM Scott Ksander via Nut-upsuser <<a href="mailto:nut-upsuser@alioth-lists.debian.net">nut-upsuser@alioth-lists.debian.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div class="msg3870369219602242256">







<div lang="EN-US" style="overflow-wrap: break-word;">
<div class="m_3870369219602242256WordSection1">
<p class="MsoNormal"><span style="font-size:11pt">I have a <span class="m_3870369219602242256SpellE">
PiNUT</span> setup.<span>  </span>It is physically connected (USB) and monitoring 3 UPS units (UPSA, UPSB, and UPSC).<span>  
</span>The <span class="m_3870369219602242256SpellE">PiNUT</span> is powered by USPA.<span>  
</span>UPSA powers other equipment with clients installed.<span> 
</span><span> </span>Other equipment will be clients of UPSB and UPSC.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11pt"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11pt">I am confused about how to correctly configure the
<span class="m_3870369219602242256SpellE">PiNUT</span> settings.<span>  </span>
I have searched for <span class="m_3870369219602242256SpellE">howto</span> notes but they seem to have conflicting information.<span> 
</span>Should all 3 connections (USB) <span> </span>be primary?<span> 
</span>Do I increment the <span class="m_3870369219602242256SpellE">powervalue</span> in the MONITOR directive or should all show 1?<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11pt"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11pt">Thanks for any pointers,<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:11pt"><u></u> <u></u></span></p>
<p class="MsoNormal"><span style="font-size:11pt">Scott<u></u><u></u></span></p>
</div>
</div>

_______________________________________________<br>
Nut-upsuser mailing list<br>
<a href="mailto:Nut-upsuser@alioth-lists.debian.net" target="_blank">Nut-upsuser@alioth-lists.debian.net</a><br>
<a href="https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser" rel="noreferrer" target="_blank">https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser</a><br>
</div></blockquote></div>