<div dir="ltr">Hi all,<div><br></div><div>I installed the nut server successfully on a raspberry pi connected to my ups. in my upsd.conf I added "LISTEN 0.0.0.0 3493", I added an admin and an observer user.</div><div>I have 3 clients running, which should connect to the server via nut-client and in 2 out of 3 cases it works as it should. I have a NAS connected and PeaNUT running in a docker container. The nut server, NAS and PeaNUT are all able to see the ups when running "upsc server-ups".</div><div><br></div><div>Now to the problem: I have a Proxmox server running which should also connect as a nut-client. I installed and configured everything the same as on the other systems. I can ping the nut server from the Proxmox system, I can ssh to it and I even tried telnet to the 3493 port and everything works fine. I even tried running upsc -l and got the following:</div><div><br></div><div>root@pve-1:/etc/nut# upsc -l 192.168.0.19<br>Init SSL without certificate database<br>server-ups</div><div><br></div><div>But trying to connect to the server and read the ups I only get the following error:</div><div><br></div><div>root@pve-1:/etc/nut# upsc server-ups<br>Error: Connection failure: Connection refused</div><div><br></div><div>I'm completely out of ideas where to look and searching google was not much help. As two systems work as expected and the Proxmox system can see the nut server just fine I have no idea where to look next.</div><div><br></div><div>I hope someone here can help me out.</div><div><br></div><div>Thanks in advance!</div><div><br></div><div>Cheers,<br>Jens</div></div>