Bug#642757: severe lag and high cpu with Xserver 1.11.1 when pop-ups appear
Thijs Van der Schaeghe
thijs at catlab.be
Thu Sep 29 09:16:16 UTC 2011
Package: nvidia-glx
Version: 280.13.really.275.28-1
Followup-For: Bug #642757
Dear Maintainer,
I have the same problem, but even more severe. I have a dual card triple head
setup, when I disable xinerama everything runs fairly slow, if I enable
xinerame it runs even more slow. Xorg uses a fair amount of cpu resources
(around 20%).
The cards in the system are 2 nvidia GTS250's.
The system is completely unusable at the moment. Going through windows takes
seconds, typing on my right screen goes at the speed of 2 letters per second.
It does not seem to be related to the triple screen setup since even with one
screen enabled performance is low.
Greetings,
Thijs
-- Package-specific info:
uname -a:
Linux daedelhome 3.0.0-1-amd64 #1 SMP Tue Sep 20 07:03:13 UTC 2011 x86_64 GNU/Linux
/proc/version:
Linux version 3.0.0-1-amd64 (Debian 3.0.0-4) (ben at decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-9) ) #1 SMP Tue Sep 20 07:03:13 UTC 2011
/proc/driver/nvidia/version:
NVRM version: NVIDIA UNIX x86_64 Kernel Module 275.28 Wed Aug 31 16:56:51 PDT 2011
GCC version: gcc version 4.5.3 (Debian 4.5.3-9)
lspci 'VGA compatible controller [0300]':
01:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce GTS 250] [10de:0615] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:34c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at ac00 [size=128]
[virtual] Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
04:00.0 VGA compatible controller [0300]: nVidia Corporation G92 [GeForce GTS 250] [10de:0615] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:34c7]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 8c00 [size=128]
[virtual] Expansion ROM at f7000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] ACPI: RSDP 00000000000f7cd0 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000bfee3100 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bfeeb080 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bfee3280 07DA7 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: HPET 00000000bfeeb2c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bfeeb340 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bfeeb1c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] No AGP bridge found
[ 0.000000] Console: colour VGA+ 80x25
[ 0.421079] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.421087] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
[ 0.421089] vgaarb: loaded
[ 0.421090] vgaarb: bridge control possible 0000:04:00.0
[ 0.421092] vgaarb: bridge control possible 0000:01:00.0
[ 0.749626] PCI-DMA: Disabling AGP.
[ 0.749742] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.005374] Linux agpgart interface v0.103
[ 11.906290] nvidia: module license 'NVIDIA' taints kernel.
[ 12.419909] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 12.419922] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.419929] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.419931] vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:04:00.0
[ 12.420211] nvidia 0000:04:00.0: enabling device (0000 -> 0003)
[ 12.420347] nvidia 0000:04:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 12.420356] nvidia 0000:04:00.0: setting latency timer to 64
[ 12.420363] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 12.420564] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 275.28 Wed Aug 31 16:56:51 PDT 2011
[ 26.020804] NVRM: Xid (0000:04:00): 54
[ 4158.193836] NVRM: Xid (0000:04:00): 54
[ 4396.471319] NVRM: Xid (0000:04:00): 54
[ 4561.444845] NVRM: Xid (0000:04:00): 54
[ 5824.405614] NVRM: Xid (0000:04:00): 54
OpenGL and NVIDIA library files installed:
lrwxrwxrwx 1 root root 15 Sep 28 12:55 /etc/alternatives/glx -> /usr/lib/nvidia
lrwxrwxrwx 1 root root 43 Sep 28 12:55 /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/libGL.so.1
lrwxrwxrwx 1 root root 43 Sep 28 12:55 /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/libGL.so.1
lrwxrwxrwx 1 root root 51 Sep 28 12:55 /etc/alternatives/glx--libXvMCNVIDIA.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/libXvMCNVIDIA.so.1
lrwxrwxrwx 1 root root 59 Sep 28 12:55 /etc/alternatives/glx--libXvMCNVIDIA_dynamic.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/libXvMCNVIDIA_dynamic.so.1
lrwxrwxrwx 1 root root 51 Sep 28 12:55 /etc/alternatives/glx--libnvidia-cfg.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/libnvidia-cfg.so.1
lrwxrwxrwx 1 root root 25 Sep 28 12:55 /etc/alternatives/glx--linux-libglx.so -> /usr/lib/nvidia/libglx.so
lrwxrwxrwx 1 root root 36 Sep 28 12:55 /etc/alternatives/glx--nvidia-bug-report.sh -> /usr/lib/nvidia/nvidia-bug-report.sh
lrwxrwxrwx 1 root root 29 Sep 28 12:55 /etc/alternatives/glx--nvidia_drv.so -> /usr/lib/nvidia/nvidia_drv.so
lrwxrwxrwx 1 root root 23 Sep 28 12:55 /etc/alternatives/nvidia -> /usr/lib/nvidia/current
lrwxrwxrwx 1 root root 51 Sep 28 12:55 /etc/alternatives/nvidia--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/current/libGL.so.1
lrwxrwxrwx 1 root root 51 Sep 28 12:55 /etc/alternatives/nvidia--libGL.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/current/libGL.so.1
lrwxrwxrwx 1 root root 59 Sep 28 12:55 /etc/alternatives/nvidia--libXvMCNVIDIA.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/current/libXvMCNVIDIA.so.1
lrwxrwxrwx 1 root root 67 Sep 28 12:55 /etc/alternatives/nvidia--libXvMCNVIDIA_dynamic.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/current/libXvMCNVIDIA_dynamic.so.1
lrwxrwxrwx 1 root root 33 Sep 28 12:55 /etc/alternatives/nvidia--libglx.so -> /usr/lib/nvidia/current/libglx.so
lrwxrwxrwx 1 root root 59 Sep 28 12:55 /etc/alternatives/nvidia--libnvidia-cfg.so.1-x86_64-linux-gnu -> /usr/lib/x86_64-linux-gnu/nvidia/current/libnvidia-cfg.so.1
lrwxrwxrwx 1 root root 44 Sep 28 12:55 /etc/alternatives/nvidia--nvidia-bug-report.sh -> /usr/lib/nvidia/current/nvidia-bug-report.sh
lrwxrwxrwx 1 root root 37 Sep 28 12:55 /etc/alternatives/nvidia--nvidia_drv.so -> /usr/lib/nvidia/current/nvidia_drv.so
lrwxrwxrwx 1 root root 50 Sep 28 12:55 /usr/lib/x86_64-linux-gnu/libGL.so.1 -> /etc/alternatives/glx--libGL.so.1-x86_64-linux-gnu
lrwxrwxrwx 1 root root 58 Sep 28 12:55 /usr/lib/x86_64-linux-gnu/libnvidia-cfg.so.1 -> /etc/alternatives/glx--libnvidia-cfg.so.1-x86_64-linux-gnu
-rw-r--r-- 1 root root 29424240 Sep 1 02:14 /usr/lib/x86_64-linux-gnu/libnvidia-glcore.so.275.28
-rw-r--r-- 1 root root 10296 Sep 1 02:18 /usr/lib/x86_64-linux-gnu/libnvidia-tls.so.275.28
-rw-r--r-- 1 root root 21473 Sep 29 10:59 /var/log/Xorg.0.log
-rw-r--r-- 1 root root 23272 Sep 29 10:59 /var/log/Xorg.0.log.old
/usr/lib/mesa-diverted/:
total 88
drwxr-xr-x 4 root root 4096 Sep 28 12:33 .
drwxr-xr-x 216 root root 73728 Sep 29 10:09 ..
drwxr-xr-x 2 root root 4096 Sep 15 11:59 i386-linux-gnu
drwxr-xr-x 2 root root 4096 Sep 28 16:50 x86_64-linux-gnu
/usr/lib/mesa-diverted/i386-linux-gnu/:
total 8
drwxr-xr-x 2 root root 4096 Sep 15 11:59 .
drwxr-xr-x 4 root root 4096 Sep 28 12:33 ..
/usr/lib/mesa-diverted/x86_64-linux-gnu/:
total 368
drwxr-xr-x 2 root root 4096 Sep 28 16:50 .
drwxr-xr-x 4 root root 4096 Sep 28 12:33 ..
lrwxrwxrwx 1 root root 12 Sep 24 20:43 libGL.so.1 -> libGL.so.1.2
-rw-r--r-- 1 root root 363920 Sep 24 20:43 libGL.so.1.2
/usr/lib/nvidia/:
total 100
drwxr-xr-x 3 root root 4096 Sep 28 12:55 .
drwxr-xr-x 216 root root 73728 Sep 29 10:09 ..
-rwxr-xr-x 1 root root 1775 Jul 4 19:30 check-for-conflicting-opengl-libraries
-rwxr-xr-x 1 root root 1341 Jul 4 14:29 check-for-mismatching-nvidia-module
-rwxr-xr-x 1 root root 2566 Jul 12 12:26 create-xorg-nvidia-conf-experimental
drwxr-xr-x 2 root root 4096 Sep 28 12:33 current
lrwxrwxrwx 1 root root 35 Sep 28 12:55 libglx.so -> /etc/alternatives/nvidia--libglx.so
lrwxrwxrwx 1 root root 24 Sep 28 12:55 nvidia -> /etc/alternatives/nvidia
lrwxrwxrwx 1 root root 46 Sep 28 12:55 nvidia-bug-report.sh -> /etc/alternatives/nvidia--nvidia-bug-report.sh
lrwxrwxrwx 1 root root 39 Sep 28 12:55 nvidia_drv.so -> /etc/alternatives/nvidia--nvidia_drv.so
-rwxr-xr-x 1 root root 441 Apr 27 13:08 pre-install
/usr/lib/nvidia/current/:
total 14080
drwxr-xr-x 2 root root 4096 Sep 28 12:33 .
drwxr-xr-x 3 root root 4096 Sep 28 12:55 ..
lrwxrwxrwx 1 root root 16 Sep 12 00:11 libglx.so -> libglx.so.275.28
-rw-r--r-- 1 root root 7350472 Sep 1 02:18 libglx.so.275.28
-rwxr-xr-x 1 root root 13393 Apr 23 10:23 nvidia-bug-report.sh
-rw-r--r-- 1 root root 3807 Sep 12 00:11 nvidia.ids
-rw-r--r-- 1 root root 7010400 Sep 1 02:01 nvidia_drv.so
/usr/lib/nvidia/nvidia/:
total 14080
drwxr-xr-x 2 root root 4096 Sep 28 12:33 .
drwxr-xr-x 3 root root 4096 Sep 28 12:55 ..
lrwxrwxrwx 1 root root 16 Sep 12 00:11 libglx.so -> libglx.so.275.28
-rw-r--r-- 1 root root 7350472 Sep 1 02:18 libglx.so.275.28
-rwxr-xr-x 1 root root 13393 Apr 23 10:23 nvidia-bug-report.sh
-rw-r--r-- 1 root root 3807 Sep 12 00:11 nvidia.ids
-rw-r--r-- 1 root root 7010400 Sep 1 02:01 nvidia_drv.so
/usr/lib/x86_64-linux-gnu/nvidia/:
total 40
drwxr-xr-x 3 root root 4096 Sep 28 12:55 .
drwxr-xr-x 26 root root 20480 Sep 29 10:09 ..
drwxr-xr-x 2 root root 4096 Sep 28 12:32 current
lrwxrwxrwx 1 root root 53 Sep 28 12:55 libGL.so.1 -> /etc/alternatives/nvidia--libGL.so.1-x86_64-linux-gnu
lrwxrwxrwx 1 root root 61 Sep 28 12:55 libXvMCNVIDIA.so.1 -> /etc/alternatives/nvidia--libXvMCNVIDIA.so.1-x86_64-linux-gnu
lrwxrwxrwx 1 root root 69 Sep 28 12:55 libXvMCNVIDIA_dynamic.so.1 -> /etc/alternatives/nvidia--libXvMCNVIDIA_dynamic.so.1-x86_64-linux-gnu
lrwxrwxrwx 1 root root 61 Sep 28 12:55 libnvidia-cfg.so.1 -> /etc/alternatives/nvidia--libnvidia-cfg.so.1-x86_64-linux-gnu
/usr/lib/x86_64-linux-gnu/nvidia/current/:
total 1304
drwxr-xr-x 2 root root 4096 Sep 28 12:32 .
drwxr-xr-x 3 root root 4096 Sep 28 12:55 ..
lrwxrwxrwx 1 root root 15 Sep 12 00:11 libGL.so.1 -> libGL.so.275.28
-rw-r--r-- 1 root root 1023120 Sep 1 02:15 libGL.so.275.28
lrwxrwxrwx 1 root root 23 Sep 12 00:11 libXvMCNVIDIA.so.1 -> libXvMCNVIDIA.so.275.28
-rw-r--r-- 1 root root 155608 Sep 1 02:02 libXvMCNVIDIA.so.275.28
lrwxrwxrwx 1 root root 23 Sep 12 00:11 libXvMCNVIDIA_dynamic.so.1 -> libXvMCNVIDIA.so.275.28
lrwxrwxrwx 1 root root 23 Sep 12 00:11 libnvidia-cfg.so.1 -> libnvidia-cfg.so.275.28
-rw-r--r-- 1 root root 133096 Sep 1 03:08 libnvidia-cfg.so.275.28
Files from nvidia-installer:
Config and logfiles:
<<<<<<<<<< /etc/X11/xorg.conf >>>>>>>>>>
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 280.13 (pbuilder at cake) Sat Aug 6 10:23:05 UTC 2011
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildd at barber) Sun Jun 13 12:08:56 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1280 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" LeftOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Medion MD 20122"
HorizSync 30.0 - 83.0
VertRefresh 50.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "FUS L17-3"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
BusID "PCI:4:0:0"
Option "NoDRI"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:1:0:0"
Screen 0
Option "NoAccel" "True"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:1:0:0"
Screen 1
Option "NoAccel" "True"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: 1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
^^^^^^^^^^ /etc/X11/xorg.conf ^^^^^^^^^^
<<<<<<<<<< /var/log/Xorg.0.log >>>>>>>>>>
[ 5823.079]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 5823.079] X Protocol Version 11, Revision 0
[ 5823.079] Build Operating System: Linux 3.1.0-rc4-amd64 x86_64 Debian
[ 5823.079] Current Operating System: Linux daedelhome 3.0.0-1-amd64 #1 SMP Tue Sep 20 07:03:13 UTC 2011 x86_64
[ 5823.079] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=d76ce644-57fa-416b-a8e2-59c0b29cc665 ro quiet
[ 5823.079] Build Date: 24 September 2011 09:28:42AM
[ 5823.079] xorg-server 2:1.11.1-1 (Cyril Brulebois <kibi at debian.org>)
[ 5823.079] Current version of pixman: 0.22.2
[ 5823.079] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5823.079] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5823.079] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 29 10:59:53 2011
[ 5823.079] (==) Using config file: "/etc/X11/xorg.conf"
[ 5823.079] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5823.080] (==) ServerLayout "Layout0"
[ 5823.080] (**) |-->Screen "Screen0" (0)
[ 5823.080] (**) | |-->Monitor "Monitor0"
[ 5823.080] (**) | |-->Device "Device0"
[ 5823.080] (**) |-->Screen "Screen1" (1)
[ 5823.080] (**) | |-->Monitor "Monitor1"
[ 5823.080] (**) | |-->Device "Device1"
[ 5823.080] (**) |-->Screen "Screen2" (2)
[ 5823.080] (**) | |-->Monitor "Monitor2"
[ 5823.080] (**) | |-->Device "Device2"
[ 5823.080] (**) |-->Input Device "Keyboard0"
[ 5823.080] (**) |-->Input Device "Mouse0"
[ 5823.080] (**) Option "Xinerama" "0"
[ 5823.080] (==) Automatically adding devices
[ 5823.080] (==) Automatically enabling devices
[ 5823.080] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 5823.080] Entry deleted from font path.
[ 5823.080] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 5823.080] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5823.080] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 5823.080] (WW) Disabling Keyboard0
[ 5823.080] (WW) Disabling Mouse0
[ 5823.080] (II) Loader magic: 0x7cfdc0
[ 5823.080] (II) Module ABI versions:
[ 5823.080] X.Org ANSI C Emulation: 0.4
[ 5823.080] X.Org Video Driver: 11.0
[ 5823.080] X.Org XInput driver : 13.0
[ 5823.080] X.Org Server Extension : 6.0
[ 5823.082] (--) PCI:*(0:1:0:0) 10de:0615:1458:34c7 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[ 5823.082] (--) PCI: (0:4:0:0) 10de:0615:1458:34c7 rev 162, Mem @ 0xf6000000/16777216, 0xd0000000/268435456, 0xf4000000/33554432, I/O @ 0x00008c00/128, BIOS @ 0x????????/131072
[ 5823.082] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5823.082] (II) LoadModule: "extmod"
[ 5823.082] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 5823.082] (II) Module extmod: vendor="X.Org Foundation"
[ 5823.082] compiled for 1.11.1, module version = 1.0.0
[ 5823.082] Module class: X.Org Server Extension
[ 5823.082] ABI class: X.Org Server Extension, version 6.0
[ 5823.083] (II) Loading extension SELinux
[ 5823.083] (II) Loading extension MIT-SCREEN-SAVER
[ 5823.083] (II) Loading extension XFree86-VidModeExtension
[ 5823.083] (II) Loading extension XFree86-DGA
[ 5823.083] (II) Loading extension DPMS
[ 5823.083] (II) Loading extension XVideo
[ 5823.083] (II) Loading extension XVideo-MotionCompensation
[ 5823.083] (II) Loading extension X-Resource
[ 5823.083] (II) LoadModule: "dbe"
[ 5823.083] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 5823.083] (II) Module dbe: vendor="X.Org Foundation"
[ 5823.083] compiled for 1.11.1, module version = 1.0.0
[ 5823.083] Module class: X.Org Server Extension
[ 5823.083] ABI class: X.Org Server Extension, version 6.0
[ 5823.083] (II) Loading extension DOUBLE-BUFFER
[ 5823.083] (II) LoadModule: "glx"
[ 5823.083] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 5823.095] (II) Module glx: vendor="NVIDIA Corporation"
[ 5823.095] compiled for 4.0.2, module version = 1.0.0
[ 5823.095] Module class: X.Org Server Extension
[ 5823.095] (II) NVIDIA GLX Module 275.28 Wed Aug 31 17:15:37 PDT 2011
[ 5823.095] (II) Loading extension GLX
[ 5823.095] (II) LoadModule: "record"
[ 5823.095] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 5823.095] (II) Module record: vendor="X.Org Foundation"
[ 5823.095] compiled for 1.11.1, module version = 1.13.0
[ 5823.095] Module class: X.Org Server Extension
[ 5823.095] ABI class: X.Org Server Extension, version 6.0
[ 5823.095] (II) Loading extension RECORD
[ 5823.095] (II) LoadModule: "dri"
[ 5823.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 5823.095] (II) Module dri: vendor="X.Org Foundation"
[ 5823.095] compiled for 1.11.1, module version = 1.0.0
[ 5823.095] ABI class: X.Org Server Extension, version 6.0
[ 5823.095] (II) Loading extension XFree86-DRI
[ 5823.095] (II) LoadModule: "dri2"
[ 5823.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5823.095] (II) Module dri2: vendor="X.Org Foundation"
[ 5823.095] compiled for 1.11.1, module version = 1.2.0
[ 5823.095] ABI class: X.Org Server Extension, version 6.0
[ 5823.095] (II) Loading extension DRI2
[ 5823.095] (II) LoadModule: "nvidia"
[ 5823.096] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5823.096] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5823.096] compiled for 4.0.2, module version = 1.0.0
[ 5823.096] Module class: X.Org Video Driver
[ 5823.096] (II) NVIDIA dlloader X Driver 275.28 Wed Aug 31 16:58:32 PDT 2011
[ 5823.096] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5823.096] (++) using VT number 9
[ 5823.108] (II) Loading sub module "fb"
[ 5823.108] (II) LoadModule: "fb"
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5823.108] (II) Module fb: vendor="X.Org Foundation"
[ 5823.108] compiled for 1.11.1, module version = 1.0.0
[ 5823.108] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5823.108] (II) Loading sub module "wfb"
[ 5823.108] (II) LoadModule: "wfb"
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5823.108] (II) Module wfb: vendor="X.Org Foundation"
[ 5823.108] compiled for 1.11.1, module version = 1.0.0
[ 5823.108] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5823.108] (II) Loading sub module "ramdac"
[ 5823.108] (II) LoadModule: "ramdac"
[ 5823.108] (II) Module "ramdac" already built-in
[ 5823.108] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5823.109] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5823.109] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5823.109] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5823.109] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 5823.109] (==) NVIDIA(0): RGB weight 888
[ 5823.109] (==) NVIDIA(0): Default visual is TrueColor
[ 5823.109] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5823.109] (**) NVIDIA(0): Option "TwinView" "0"
[ 5823.109] (**) NVIDIA(0): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
[ 5823.822] (II) NVIDIA(GPU-0): Display (FUS L17-3 (CRT-1)) does not support NVIDIA 3D Vision
[ 5823.823] (II) NVIDIA(GPU-0): stereo.
[ 5823.909] (II) NVIDIA(GPU-0): Display (Medion MD 20122 (DFP-0)) does not support NVIDIA 3D
[ 5823.909] (II) NVIDIA(GPU-0): Vision stereo.
[ 5823.914] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 5823.914] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 5823.914] (--) NVIDIA(0): VideoBIOS: 62.92.7d.00.10
[ 5823.914] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 5823.914] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 5823.914] (--) NVIDIA(0): Connected display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 5823.914] (--) NVIDIA(0): FUS L17-3 (CRT-1)
[ 5823.914] (--) NVIDIA(0): Medion MD 20122 (DFP-0)
[ 5823.914] (--) NVIDIA(0): FUS L17-3 (CRT-1): 400.0 MHz maximum pixel clock
[ 5823.914] (--) NVIDIA(0): Medion MD 20122 (DFP-0): 330.0 MHz maximum pixel clock
[ 5823.914] (--) NVIDIA(0): Medion MD 20122 (DFP-0): Internal Dual Link TMDS
[ 5823.918] (II) NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
[ 5824.001] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 5824.001] (II) NVIDIA(0): Validated modes:
[ 5824.001] (II) NVIDIA(0): "DFP:nvidia-auto-select+0+0"
[ 5824.001] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 5824.037] (--) NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config
[ 5824.037] (--) NVIDIA(0): option
[ 5824.037] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 5824.037] (==) NVIDIA(1): RGB weight 888
[ 5824.037] (==) NVIDIA(1): Default visual is TrueColor
[ 5824.037] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 5824.037] (**) NVIDIA(1): Option "TwinView" "0"
[ 5824.037] (**) NVIDIA(1): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
[ 5824.037] (II) NVIDIA(1): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 5824.037] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 5824.037] (--) NVIDIA(1): VideoBIOS: 62.92.7d.00.10
[ 5824.037] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 5824.037] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 5824.037] (--) NVIDIA(1): Connected display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 5824.037] (--) NVIDIA(1): FUS L17-3 (CRT-1)
[ 5824.037] (--) NVIDIA(1): Medion MD 20122 (DFP-0)
[ 5824.037] (--) NVIDIA(1): FUS L17-3 (CRT-1): 400.0 MHz maximum pixel clock
[ 5824.037] (--) NVIDIA(1): Medion MD 20122 (DFP-0): 330.0 MHz maximum pixel clock
[ 5824.037] (--) NVIDIA(1): Medion MD 20122 (DFP-0): Internal Dual Link TMDS
[ 5824.041] (II) NVIDIA(1): Display Device found referenced in MetaMode: CRT-1
[ 5824.058] (II) NVIDIA(1): Assigned Display Device: CRT-1
[ 5824.059] (II) NVIDIA(1): Validated modes:
[ 5824.059] (II) NVIDIA(1): "CRT:nvidia-auto-select+0+0"
[ 5824.059] (II) NVIDIA(1): Virtual screen size determined to be 1280 x 1024
[ 5824.064] (--) NVIDIA(1): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 5824.064] (--) NVIDIA(1): option
[ 5824.064] (**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
[ 5824.064] (==) NVIDIA(2): RGB weight 888
[ 5824.064] (==) NVIDIA(2): Default visual is TrueColor
[ 5824.064] (==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
[ 5824.065] (**) NVIDIA(2): Option "TwinView" "1"
[ 5824.065] (**) NVIDIA(2): Option "MetaModes" "CRT-0: nvidia-auto-select +0+0, CRT-1: 1280x1024 +0+0"
[ 5824.065] (**) NVIDIA(2): Option "TwinViewXineramaInfoOrder" "CRT-0"
[ 5824.535] (II) NVIDIA(GPU-1): Display (FUS L17-3 (CRT-0)) does not support NVIDIA 3D Vision
[ 5824.535] (II) NVIDIA(GPU-1): stereo.
[ 5824.538] (WW) NVIDIA(GPU-1): Unable to read EDID for display device CRT-1
[ 5824.554] (II) NVIDIA(2): NVIDIA GPU GeForce GTS 250 (G92) at PCI:4:0:0 (GPU-1)
[ 5824.554] (--) NVIDIA(2): Memory: 1048576 kBytes
[ 5824.554] (--) NVIDIA(2): VideoBIOS: 62.92.79.00.06
[ 5824.554] (II) NVIDIA(2): Detected PCI Express Link width: 16X
[ 5824.554] (--) NVIDIA(2): Interlaced video modes are supported on this GPU
[ 5824.554] (--) NVIDIA(2): Connected display device(s) on GeForce GTS 250 at PCI:4:0:0
[ 5824.554] (--) NVIDIA(2): FUS L17-3 (CRT-0)
[ 5824.554] (--) NVIDIA(2): CRT-1
[ 5824.554] (--) NVIDIA(2): FUS L17-3 (CRT-0): 400.0 MHz maximum pixel clock
[ 5824.554] (--) NVIDIA(2): CRT-1: 400.0 MHz maximum pixel clock
[ 5824.564] (**) NVIDIA(2): TwinView enabled
[ 5824.564] (II) NVIDIA(2): Display Devices found referenced in MetaMode: CRT-0, CRT-1
[ 5824.620] (II) NVIDIA(2): Assigned Display Devices: CRT-0, CRT-1
[ 5824.621] (II) NVIDIA(2): Validated modes:
[ 5824.621] (II) NVIDIA(2): "CRT-0:nvidia-auto-select+0+0,CRT-1:1280x1024+0+0"
[ 5824.621] (II) NVIDIA(2): Virtual screen size determined to be 1280 x 1024
[ 5824.629] (--) NVIDIA(2): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 5824.631] (--) NVIDIA(2): option
[ 5824.631] (--) Depth 24 pixmap format is 32 bpp
[ 5824.631] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 5824.653] (II) NVIDIA(0): Setting mode "DFP:nvidia-auto-select+0+0"
[ 5824.741] (II) Loading extension NV-GLX
[ 5824.940] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 5824.940] (==) NVIDIA(0): Backing store disabled
[ 5824.941] (==) NVIDIA(0): Silken mouse enabled
[ 5824.941] (**) NVIDIA(0): DPMS enabled
[ 5824.941] (II) Loading extension NV-CONTROL
[ 5824.943] (II) Loading extension XINERAMA
[ 5824.943] (WW) NVIDIA(0): Option "NoAccel" is not used
[ 5824.943] (II) Loading sub module "dri2"
[ 5824.943] (II) LoadModule: "dri2"
[ 5824.943] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5824.943] (II) Module dri2: vendor="X.Org Foundation"
[ 5824.943] compiled for 1.11.1, module version = 1.2.0
[ 5824.943] ABI class: X.Org Server Extension, version 6.0
[ 5824.943] (II) NVIDIA(0): [DRI2] Setup complete
[ 5824.943] (==) RandR enabled
[ 5824.963] (II) NVIDIA(1): Setting mode "CRT:nvidia-auto-select+0+0"
[ 5825.141] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 5825.141] (==) NVIDIA(1): Backing store disabled
[ 5825.142] (==) NVIDIA(1): Silken mouse enabled
[ 5825.142] (==) NVIDIA(1): DPMS enabled
[ 5825.143] (WW) NVIDIA(1): Option "NoAccel" is not used
[ 5825.143] (II) Loading sub module "dri2"
[ 5825.143] (II) LoadModule: "dri2"
[ 5825.143] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5825.143] (II) Module dri2: vendor="X.Org Foundation"
[ 5825.143] compiled for 1.11.1, module version = 1.2.0
[ 5825.143] ABI class: X.Org Server Extension, version 6.0
[ 5825.143] (II) NVIDIA(1): [DRI2] Setup complete
[ 5825.143] (==) RandR enabled
[ 5825.173] (II) NVIDIA(2): Setting mode
[ 5825.173] (II) NVIDIA(2): "CRT-0:nvidia-auto-select+0+0,CRT-1:1280x1024+0+0"
[ 5825.323] (==) NVIDIA(2): Disabling shared memory pixmaps
[ 5825.323] (==) NVIDIA(2): Backing store disabled
[ 5825.323] (==) NVIDIA(2): Silken mouse enabled
[ 5825.323] (==) NVIDIA(2): DPMS enabled
[ 5825.324] (WW) NVIDIA(2): Option "NoDRI" is not used
[ 5825.324] (II) Loading sub module "dri2"
[ 5825.324] (II) LoadModule: "dri2"
[ 5825.324] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5825.324] (II) Module dri2: vendor="X.Org Foundation"
[ 5825.324] compiled for 1.11.1, module version = 1.2.0
[ 5825.324] ABI class: X.Org Server Extension, version 6.0
[ 5825.324] (II) NVIDIA(2): [DRI2] Setup complete
[ 5825.324] (==) RandR enabled
[ 5825.324] (II) Initializing built-in extension Generic Event Extension
[ 5825.324] (II) Initializing built-in extension SHAPE
[ 5825.324] (II) Initializing built-in extension MIT-SHM
[ 5825.324] (II) Initializing built-in extension XInputExtension
[ 5825.324] (II) Initializing built-in extension XTEST
[ 5825.324] (II) Initializing built-in extension BIG-REQUESTS
[ 5825.324] (II) Initializing built-in extension SYNC
[ 5825.324] (II) Initializing built-in extension XKEYBOARD
[ 5825.324] (II) Initializing built-in extension XC-MISC
[ 5825.324] (II) Initializing built-in extension SECURITY
[ 5825.324] (II) Initializing built-in extension XINERAMA
[ 5825.324] (II) Initializing built-in extension XFIXES
[ 5825.324] (II) Initializing built-in extension RENDER
[ 5825.324] (II) Initializing built-in extension RANDR
[ 5825.324] (II) Initializing built-in extension COMPOSITE
[ 5825.324] (II) Initializing built-in extension DAMAGE
[ 5825.324] (II) SELinux: Disabled on system
[ 5825.332] (II) Initializing extension GLX
[ 5825.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 5825.497] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5825.497] (II) LoadModule: "evdev"
[ 5825.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.497] (II) Module evdev: vendor="X.Org Foundation"
[ 5825.497] compiled for 1.11.0, module version = 2.6.0
[ 5825.497] Module class: X.Org XInput Driver
[ 5825.497] ABI class: X.Org XInput driver, version 13.0
[ 5825.497] (II) Using input driver 'evdev' for 'Power Button'
[ 5825.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.497] (**) Power Button: always reports core events
[ 5825.497] (**) Power Button: Device: "/dev/input/event3"
[ 5825.497] (--) Power Button: Found keys
[ 5825.497] (II) Power Button: Configuring as keyboard
[ 5825.497] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 5825.497] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5825.497] (**) Option "xkb_rules" "evdev"
[ 5825.497] (**) Option "xkb_model" "pc105"
[ 5825.497] (**) Option "xkb_layout" "be"
[ 5825.521] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 5825.521] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5825.521] (II) Using input driver 'evdev' for 'Power Button'
[ 5825.521] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.521] (**) Power Button: always reports core events
[ 5825.521] (**) Power Button: Device: "/dev/input/event2"
[ 5825.521] (--) Power Button: Found keys
[ 5825.521] (II) Power Button: Configuring as keyboard
[ 5825.521] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 5825.521] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5825.521] (**) Option "xkb_rules" "evdev"
[ 5825.521] (**) Option "xkb_model" "pc105"
[ 5825.521] (**) Option "xkb_layout" "be"
[ 5825.521] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event1)
[ 5825.521] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 5825.521] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[ 5825.521] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.521] (**) PIXART USB OPTICAL MOUSE: always reports core events
[ 5825.521] (**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 5825.522] (--) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[ 5825.522] (--) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[ 5825.522] (--) PIXART USB OPTICAL MOUSE: Found relative axes
[ 5825.522] (--) PIXART USB OPTICAL MOUSE: Found x and y relative axes
[ 5825.522] (II) PIXART USB OPTICAL MOUSE: Configuring as mouse
[ 5825.522] (II) PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5825.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input11/event1"
[ 5825.522] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 8)
[ 5825.522] (II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 5825.522] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[ 5825.522] (II) No input driver/identifier specified (ignoring)
[ 5825.522] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 5825.522] (II) No input driver/identifier specified (ignoring)
[ 5825.523] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 5825.523] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5825.523] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 5825.523] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.523] (**) AT Translated Set 2 keyboard: always reports core events
[ 5825.523] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 5825.523] (--) AT Translated Set 2 keyboard: Found keys
[ 5825.523] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 5825.523] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 5825.523] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 5825.523] (**) Option "xkb_rules" "evdev"
[ 5825.523] (**) Option "xkb_model" "pc105"
[ 5825.523] (**) Option "xkb_layout" "be"
[ 5825.523] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 5825.523] (II) No input driver/identifier specified (ignoring)
^^^^^^^^^^ /var/log/Xorg.0.log ^^^^^^^^^^
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.0.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=nl_BE.utf8, LC_CTYPE=nl_BE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages nvidia-glx depends on:
ii dpkg 1.16.1
ii libgl1-nvidia-glx 280.13.really.275.28-1
ii nvidia-alternative 280.13.really.275.28-1
ii nvidia-installer-cleanup 20110729+2
ii nvidia-kernel-dkms [nvidia-kernel-275.28] 280.13.really.275.28-1
ii nvidia-support 20110729+2
ii nvidia-vdpau-driver 280.13.really.275.28-1
ii xserver-xorg-video-nvidia 280.13.really.275.28-1
nvidia-glx recommends no packages.
Versions of packages nvidia-glx suggests:
ii nvidia-kernel-dkms [nvidia-kernel-dkms] 280.13.really.275.28-1
ii nvidia-settings 280.13-1
Versions of packages libgl1-nvidia-glx depends on:
ii libc6 2.13-21
ii libx11-6 2:1.4.4-2
ii libxext6 2:1.3.0-3
ii libxv1 2:1.0.6-2
ii libxvmc1 2:1.0.6-1
ii multiarch-support 2.13-21
ii nvidia-alternative 280.13.really.275.28-1
ii nvidia-installer-cleanup 20110729+2
ii nvidia-support 20110729+2
Versions of packages libgl1-nvidia-glx recommends:
ii nvidia-kernel-dkms [nvidia-kernel-275.28] 280.13.really.275.28-1
Versions of packages libgl1-nvidia-glx suggests:
ii nvidia-kernel-dkms [nvidia-kernel-dkms] 280.13.really.275.28-1
Versions of packages xserver-xorg-video-nvidia depends on:
ii libc6 2.13-21
ii libgl1-nvidia-glx 280.13.really.275.28-1
ii nvidia-alternative 280.13.really.275.28-1
ii nvidia-installer-cleanup 20110729+2
ii nvidia-support 20110729+2
ii xserver-xorg-core [xorg-video-abi-11] 2:1.11.1-1
Versions of packages xserver-xorg-video-nvidia recommends:
ii nvidia-kernel-dkms [nvidia-kernel-275.28] 280.13.really.275.28-1
ii nvidia-vdpau-driver 280.13.really.275.28-1
Versions of packages xserver-xorg-video-nvidia suggests:
ii nvidia-kernel-dkms [nvidia-kernel-dkms] 280.13.really.275.28-1
ii nvidia-settings 280.13-1
Versions of packages nvidia-alternative depends on:
ii glx-alternative-nvidia 0.1.94
ii libgl1-nvidia-alternatives 280.13.really.275.28-1
ii libglx-nvidia-alternatives 280.13.really.275.28-1
Versions of packages nvidia-kernel-dkms depends on:
ii dkms 2.2.0.2-1
ii nvidia-installer-cleanup 20110729+2
ii nvidia-kernel-common 20110729+2
nvidia-kernel-dkms recommends no packages.
Versions of packages glx-alternative-nvidia depends on:
ii glx-alternative-mesa 0.1.94
ii glx-diversions 0.1.94
glx-alternative-nvidia suggests no packages.
Versions of packages nvidia-glx is related to:
ii libgl1-nvidia-glx [libgl1-nvidia-glx-any] 280.13.really.275.28-1
ii libgl1-nvidia-glx-ia32-any <none>
ii linux-headers-3.0.0-1-amd64 [linux-headers] 3.0.0-4
ii linux-headers-amd64 [linux-headers] 3.0.0+39
ii nvidia-glx [nvidia-glx-any] 280.13.really.275.28-1
ii nvidia-kernel-common 20110729+2
ii nvidia-kernel-dkms [nvidia-kernel-dkms] 280.13.really.275.28-1
ii nvidia-kernel-source <none>
ii nvidia-settings 280.13-1
ii nvidia-support 20110729+2
ii nvidia-xconfig 280.13-1
ii xserver-xorg 1:7.6+9
ii xserver-xorg-core 2:1.11.1-1
ii xserver-xorg-video-nvidia [xserver-xorg-video-nvidi 280.13.really.275.28-1
-- no debconf information
-------------- next part --------------
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 280.13 (pbuilder at cake) Sat Aug 6 10:23:05 UTC 2011
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildd at barber) Sun Jun 13 12:08:56 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 1280 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" LeftOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Medion MD 20122"
HorizSync 30.0 - 83.0
VertRefresh 50.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "FUS L17-3"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
BusID "PCI:4:0:0"
Option "NoDRI"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:1:0:0"
Screen 0
Option "NoAccel" "True"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:1:0:0"
Screen 1
Option "NoAccel" "True"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: 1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
-------------- next part --------------
[ 5823.079]
X.Org X Server 1.11.1
Release Date: 2011-09-24
[ 5823.079] X Protocol Version 11, Revision 0
[ 5823.079] Build Operating System: Linux 3.1.0-rc4-amd64 x86_64 Debian
[ 5823.079] Current Operating System: Linux daedelhome 3.0.0-1-amd64 #1 SMP Tue Sep 20 07:03:13 UTC 2011 x86_64
[ 5823.079] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=d76ce644-57fa-416b-a8e2-59c0b29cc665 ro quiet
[ 5823.079] Build Date: 24 September 2011 09:28:42AM
[ 5823.079] xorg-server 2:1.11.1-1 (Cyril Brulebois <kibi at debian.org>)
[ 5823.079] Current version of pixman: 0.22.2
[ 5823.079] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5823.079] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5823.079] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 29 10:59:53 2011
[ 5823.079] (==) Using config file: "/etc/X11/xorg.conf"
[ 5823.079] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5823.080] (==) ServerLayout "Layout0"
[ 5823.080] (**) |-->Screen "Screen0" (0)
[ 5823.080] (**) | |-->Monitor "Monitor0"
[ 5823.080] (**) | |-->Device "Device0"
[ 5823.080] (**) |-->Screen "Screen1" (1)
[ 5823.080] (**) | |-->Monitor "Monitor1"
[ 5823.080] (**) | |-->Device "Device1"
[ 5823.080] (**) |-->Screen "Screen2" (2)
[ 5823.080] (**) | |-->Monitor "Monitor2"
[ 5823.080] (**) | |-->Device "Device2"
[ 5823.080] (**) |-->Input Device "Keyboard0"
[ 5823.080] (**) |-->Input Device "Mouse0"
[ 5823.080] (**) Option "Xinerama" "0"
[ 5823.080] (==) Automatically adding devices
[ 5823.080] (==) Automatically enabling devices
[ 5823.080] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 5823.080] Entry deleted from font path.
[ 5823.080] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 5823.080] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5823.080] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 5823.080] (WW) Disabling Keyboard0
[ 5823.080] (WW) Disabling Mouse0
[ 5823.080] (II) Loader magic: 0x7cfdc0
[ 5823.080] (II) Module ABI versions:
[ 5823.080] X.Org ANSI C Emulation: 0.4
[ 5823.080] X.Org Video Driver: 11.0
[ 5823.080] X.Org XInput driver : 13.0
[ 5823.080] X.Org Server Extension : 6.0
[ 5823.082] (--) PCI:*(0:1:0:0) 10de:0615:1458:34c7 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
[ 5823.082] (--) PCI: (0:4:0:0) 10de:0615:1458:34c7 rev 162, Mem @ 0xf6000000/16777216, 0xd0000000/268435456, 0xf4000000/33554432, I/O @ 0x00008c00/128, BIOS @ 0x????????/131072
[ 5823.082] (II) Open ACPI successful (/var/run/acpid.socket)
[ 5823.082] (II) LoadModule: "extmod"
[ 5823.082] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 5823.082] (II) Module extmod: vendor="X.Org Foundation"
[ 5823.082] compiled for 1.11.1, module version = 1.0.0
[ 5823.082] Module class: X.Org Server Extension
[ 5823.082] ABI class: X.Org Server Extension, version 6.0
[ 5823.083] (II) Loading extension SELinux
[ 5823.083] (II) Loading extension MIT-SCREEN-SAVER
[ 5823.083] (II) Loading extension XFree86-VidModeExtension
[ 5823.083] (II) Loading extension XFree86-DGA
[ 5823.083] (II) Loading extension DPMS
[ 5823.083] (II) Loading extension XVideo
[ 5823.083] (II) Loading extension XVideo-MotionCompensation
[ 5823.083] (II) Loading extension X-Resource
[ 5823.083] (II) LoadModule: "dbe"
[ 5823.083] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 5823.083] (II) Module dbe: vendor="X.Org Foundation"
[ 5823.083] compiled for 1.11.1, module version = 1.0.0
[ 5823.083] Module class: X.Org Server Extension
[ 5823.083] ABI class: X.Org Server Extension, version 6.0
[ 5823.083] (II) Loading extension DOUBLE-BUFFER
[ 5823.083] (II) LoadModule: "glx"
[ 5823.083] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 5823.095] (II) Module glx: vendor="NVIDIA Corporation"
[ 5823.095] compiled for 4.0.2, module version = 1.0.0
[ 5823.095] Module class: X.Org Server Extension
[ 5823.095] (II) NVIDIA GLX Module 275.28 Wed Aug 31 17:15:37 PDT 2011
[ 5823.095] (II) Loading extension GLX
[ 5823.095] (II) LoadModule: "record"
[ 5823.095] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 5823.095] (II) Module record: vendor="X.Org Foundation"
[ 5823.095] compiled for 1.11.1, module version = 1.13.0
[ 5823.095] Module class: X.Org Server Extension
[ 5823.095] ABI class: X.Org Server Extension, version 6.0
[ 5823.095] (II) Loading extension RECORD
[ 5823.095] (II) LoadModule: "dri"
[ 5823.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 5823.095] (II) Module dri: vendor="X.Org Foundation"
[ 5823.095] compiled for 1.11.1, module version = 1.0.0
[ 5823.095] ABI class: X.Org Server Extension, version 6.0
[ 5823.095] (II) Loading extension XFree86-DRI
[ 5823.095] (II) LoadModule: "dri2"
[ 5823.095] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5823.095] (II) Module dri2: vendor="X.Org Foundation"
[ 5823.095] compiled for 1.11.1, module version = 1.2.0
[ 5823.095] ABI class: X.Org Server Extension, version 6.0
[ 5823.095] (II) Loading extension DRI2
[ 5823.095] (II) LoadModule: "nvidia"
[ 5823.096] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5823.096] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5823.096] compiled for 4.0.2, module version = 1.0.0
[ 5823.096] Module class: X.Org Video Driver
[ 5823.096] (II) NVIDIA dlloader X Driver 275.28 Wed Aug 31 16:58:32 PDT 2011
[ 5823.096] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5823.096] (++) using VT number 9
[ 5823.108] (II) Loading sub module "fb"
[ 5823.108] (II) LoadModule: "fb"
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5823.108] (II) Module fb: vendor="X.Org Foundation"
[ 5823.108] compiled for 1.11.1, module version = 1.0.0
[ 5823.108] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5823.108] (II) Loading sub module "wfb"
[ 5823.108] (II) LoadModule: "wfb"
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5823.108] (II) Module wfb: vendor="X.Org Foundation"
[ 5823.108] compiled for 1.11.1, module version = 1.0.0
[ 5823.108] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5823.108] (II) Loading sub module "ramdac"
[ 5823.108] (II) LoadModule: "ramdac"
[ 5823.108] (II) Module "ramdac" already built-in
[ 5823.108] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5823.108] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5823.109] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5823.109] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5823.109] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5823.109] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 5823.109] (==) NVIDIA(0): RGB weight 888
[ 5823.109] (==) NVIDIA(0): Default visual is TrueColor
[ 5823.109] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5823.109] (**) NVIDIA(0): Option "TwinView" "0"
[ 5823.109] (**) NVIDIA(0): Option "MetaModes" "DFP: nvidia-auto-select +0+0"
[ 5823.822] (II) NVIDIA(GPU-0): Display (FUS L17-3 (CRT-1)) does not support NVIDIA 3D Vision
[ 5823.823] (II) NVIDIA(GPU-0): stereo.
[ 5823.909] (II) NVIDIA(GPU-0): Display (Medion MD 20122 (DFP-0)) does not support NVIDIA 3D
[ 5823.909] (II) NVIDIA(GPU-0): Vision stereo.
[ 5823.914] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 5823.914] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 5823.914] (--) NVIDIA(0): VideoBIOS: 62.92.7d.00.10
[ 5823.914] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 5823.914] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 5823.914] (--) NVIDIA(0): Connected display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 5823.914] (--) NVIDIA(0): FUS L17-3 (CRT-1)
[ 5823.914] (--) NVIDIA(0): Medion MD 20122 (DFP-0)
[ 5823.914] (--) NVIDIA(0): FUS L17-3 (CRT-1): 400.0 MHz maximum pixel clock
[ 5823.914] (--) NVIDIA(0): Medion MD 20122 (DFP-0): 330.0 MHz maximum pixel clock
[ 5823.914] (--) NVIDIA(0): Medion MD 20122 (DFP-0): Internal Dual Link TMDS
[ 5823.918] (II) NVIDIA(0): Display Device found referenced in MetaMode: DFP-0
[ 5824.001] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 5824.001] (II) NVIDIA(0): Validated modes:
[ 5824.001] (II) NVIDIA(0): "DFP:nvidia-auto-select+0+0"
[ 5824.001] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 5824.037] (--) NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config
[ 5824.037] (--) NVIDIA(0): option
[ 5824.037] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 5824.037] (==) NVIDIA(1): RGB weight 888
[ 5824.037] (==) NVIDIA(1): Default visual is TrueColor
[ 5824.037] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 5824.037] (**) NVIDIA(1): Option "TwinView" "0"
[ 5824.037] (**) NVIDIA(1): Option "MetaModes" "CRT: nvidia-auto-select +0+0"
[ 5824.037] (II) NVIDIA(1): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 5824.037] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 5824.037] (--) NVIDIA(1): VideoBIOS: 62.92.7d.00.10
[ 5824.037] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 5824.037] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 5824.037] (--) NVIDIA(1): Connected display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 5824.037] (--) NVIDIA(1): FUS L17-3 (CRT-1)
[ 5824.037] (--) NVIDIA(1): Medion MD 20122 (DFP-0)
[ 5824.037] (--) NVIDIA(1): FUS L17-3 (CRT-1): 400.0 MHz maximum pixel clock
[ 5824.037] (--) NVIDIA(1): Medion MD 20122 (DFP-0): 330.0 MHz maximum pixel clock
[ 5824.037] (--) NVIDIA(1): Medion MD 20122 (DFP-0): Internal Dual Link TMDS
[ 5824.041] (II) NVIDIA(1): Display Device found referenced in MetaMode: CRT-1
[ 5824.058] (II) NVIDIA(1): Assigned Display Device: CRT-1
[ 5824.059] (II) NVIDIA(1): Validated modes:
[ 5824.059] (II) NVIDIA(1): "CRT:nvidia-auto-select+0+0"
[ 5824.059] (II) NVIDIA(1): Virtual screen size determined to be 1280 x 1024
[ 5824.064] (--) NVIDIA(1): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 5824.064] (--) NVIDIA(1): option
[ 5824.064] (**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
[ 5824.064] (==) NVIDIA(2): RGB weight 888
[ 5824.064] (==) NVIDIA(2): Default visual is TrueColor
[ 5824.064] (==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
[ 5824.065] (**) NVIDIA(2): Option "TwinView" "1"
[ 5824.065] (**) NVIDIA(2): Option "MetaModes" "CRT-0: nvidia-auto-select +0+0, CRT-1: 1280x1024 +0+0"
[ 5824.065] (**) NVIDIA(2): Option "TwinViewXineramaInfoOrder" "CRT-0"
[ 5824.535] (II) NVIDIA(GPU-1): Display (FUS L17-3 (CRT-0)) does not support NVIDIA 3D Vision
[ 5824.535] (II) NVIDIA(GPU-1): stereo.
[ 5824.538] (WW) NVIDIA(GPU-1): Unable to read EDID for display device CRT-1
[ 5824.554] (II) NVIDIA(2): NVIDIA GPU GeForce GTS 250 (G92) at PCI:4:0:0 (GPU-1)
[ 5824.554] (--) NVIDIA(2): Memory: 1048576 kBytes
[ 5824.554] (--) NVIDIA(2): VideoBIOS: 62.92.79.00.06
[ 5824.554] (II) NVIDIA(2): Detected PCI Express Link width: 16X
[ 5824.554] (--) NVIDIA(2): Interlaced video modes are supported on this GPU
[ 5824.554] (--) NVIDIA(2): Connected display device(s) on GeForce GTS 250 at PCI:4:0:0
[ 5824.554] (--) NVIDIA(2): FUS L17-3 (CRT-0)
[ 5824.554] (--) NVIDIA(2): CRT-1
[ 5824.554] (--) NVIDIA(2): FUS L17-3 (CRT-0): 400.0 MHz maximum pixel clock
[ 5824.554] (--) NVIDIA(2): CRT-1: 400.0 MHz maximum pixel clock
[ 5824.564] (**) NVIDIA(2): TwinView enabled
[ 5824.564] (II) NVIDIA(2): Display Devices found referenced in MetaMode: CRT-0, CRT-1
[ 5824.620] (II) NVIDIA(2): Assigned Display Devices: CRT-0, CRT-1
[ 5824.621] (II) NVIDIA(2): Validated modes:
[ 5824.621] (II) NVIDIA(2): "CRT-0:nvidia-auto-select+0+0,CRT-1:1280x1024+0+0"
[ 5824.621] (II) NVIDIA(2): Virtual screen size determined to be 1280 x 1024
[ 5824.629] (--) NVIDIA(2): DPI set to (95, 96); computed from "UseEdidDpi" X config
[ 5824.631] (--) NVIDIA(2): option
[ 5824.631] (--) Depth 24 pixmap format is 32 bpp
[ 5824.631] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 5824.653] (II) NVIDIA(0): Setting mode "DFP:nvidia-auto-select+0+0"
[ 5824.741] (II) Loading extension NV-GLX
[ 5824.940] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 5824.940] (==) NVIDIA(0): Backing store disabled
[ 5824.941] (==) NVIDIA(0): Silken mouse enabled
[ 5824.941] (**) NVIDIA(0): DPMS enabled
[ 5824.941] (II) Loading extension NV-CONTROL
[ 5824.943] (II) Loading extension XINERAMA
[ 5824.943] (WW) NVIDIA(0): Option "NoAccel" is not used
[ 5824.943] (II) Loading sub module "dri2"
[ 5824.943] (II) LoadModule: "dri2"
[ 5824.943] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5824.943] (II) Module dri2: vendor="X.Org Foundation"
[ 5824.943] compiled for 1.11.1, module version = 1.2.0
[ 5824.943] ABI class: X.Org Server Extension, version 6.0
[ 5824.943] (II) NVIDIA(0): [DRI2] Setup complete
[ 5824.943] (==) RandR enabled
[ 5824.963] (II) NVIDIA(1): Setting mode "CRT:nvidia-auto-select+0+0"
[ 5825.141] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 5825.141] (==) NVIDIA(1): Backing store disabled
[ 5825.142] (==) NVIDIA(1): Silken mouse enabled
[ 5825.142] (==) NVIDIA(1): DPMS enabled
[ 5825.143] (WW) NVIDIA(1): Option "NoAccel" is not used
[ 5825.143] (II) Loading sub module "dri2"
[ 5825.143] (II) LoadModule: "dri2"
[ 5825.143] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5825.143] (II) Module dri2: vendor="X.Org Foundation"
[ 5825.143] compiled for 1.11.1, module version = 1.2.0
[ 5825.143] ABI class: X.Org Server Extension, version 6.0
[ 5825.143] (II) NVIDIA(1): [DRI2] Setup complete
[ 5825.143] (==) RandR enabled
[ 5825.173] (II) NVIDIA(2): Setting mode
[ 5825.173] (II) NVIDIA(2): "CRT-0:nvidia-auto-select+0+0,CRT-1:1280x1024+0+0"
[ 5825.323] (==) NVIDIA(2): Disabling shared memory pixmaps
[ 5825.323] (==) NVIDIA(2): Backing store disabled
[ 5825.323] (==) NVIDIA(2): Silken mouse enabled
[ 5825.323] (==) NVIDIA(2): DPMS enabled
[ 5825.324] (WW) NVIDIA(2): Option "NoDRI" is not used
[ 5825.324] (II) Loading sub module "dri2"
[ 5825.324] (II) LoadModule: "dri2"
[ 5825.324] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 5825.324] (II) Module dri2: vendor="X.Org Foundation"
[ 5825.324] compiled for 1.11.1, module version = 1.2.0
[ 5825.324] ABI class: X.Org Server Extension, version 6.0
[ 5825.324] (II) NVIDIA(2): [DRI2] Setup complete
[ 5825.324] (==) RandR enabled
[ 5825.324] (II) Initializing built-in extension Generic Event Extension
[ 5825.324] (II) Initializing built-in extension SHAPE
[ 5825.324] (II) Initializing built-in extension MIT-SHM
[ 5825.324] (II) Initializing built-in extension XInputExtension
[ 5825.324] (II) Initializing built-in extension XTEST
[ 5825.324] (II) Initializing built-in extension BIG-REQUESTS
[ 5825.324] (II) Initializing built-in extension SYNC
[ 5825.324] (II) Initializing built-in extension XKEYBOARD
[ 5825.324] (II) Initializing built-in extension XC-MISC
[ 5825.324] (II) Initializing built-in extension SECURITY
[ 5825.324] (II) Initializing built-in extension XINERAMA
[ 5825.324] (II) Initializing built-in extension XFIXES
[ 5825.324] (II) Initializing built-in extension RENDER
[ 5825.324] (II) Initializing built-in extension RANDR
[ 5825.324] (II) Initializing built-in extension COMPOSITE
[ 5825.324] (II) Initializing built-in extension DAMAGE
[ 5825.324] (II) SELinux: Disabled on system
[ 5825.332] (II) Initializing extension GLX
[ 5825.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 5825.497] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5825.497] (II) LoadModule: "evdev"
[ 5825.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.497] (II) Module evdev: vendor="X.Org Foundation"
[ 5825.497] compiled for 1.11.0, module version = 2.6.0
[ 5825.497] Module class: X.Org XInput Driver
[ 5825.497] ABI class: X.Org XInput driver, version 13.0
[ 5825.497] (II) Using input driver 'evdev' for 'Power Button'
[ 5825.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.497] (**) Power Button: always reports core events
[ 5825.497] (**) Power Button: Device: "/dev/input/event3"
[ 5825.497] (--) Power Button: Found keys
[ 5825.497] (II) Power Button: Configuring as keyboard
[ 5825.497] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 5825.497] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5825.497] (**) Option "xkb_rules" "evdev"
[ 5825.497] (**) Option "xkb_model" "pc105"
[ 5825.497] (**) Option "xkb_layout" "be"
[ 5825.521] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 5825.521] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5825.521] (II) Using input driver 'evdev' for 'Power Button'
[ 5825.521] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.521] (**) Power Button: always reports core events
[ 5825.521] (**) Power Button: Device: "/dev/input/event2"
[ 5825.521] (--) Power Button: Found keys
[ 5825.521] (II) Power Button: Configuring as keyboard
[ 5825.521] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 5825.521] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5825.521] (**) Option "xkb_rules" "evdev"
[ 5825.521] (**) Option "xkb_model" "pc105"
[ 5825.521] (**) Option "xkb_layout" "be"
[ 5825.521] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/event1)
[ 5825.521] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 5825.521] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[ 5825.521] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.521] (**) PIXART USB OPTICAL MOUSE: always reports core events
[ 5825.521] (**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 5825.522] (--) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[ 5825.522] (--) PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[ 5825.522] (--) PIXART USB OPTICAL MOUSE: Found relative axes
[ 5825.522] (--) PIXART USB OPTICAL MOUSE: Found x and y relative axes
[ 5825.522] (II) PIXART USB OPTICAL MOUSE: Configuring as mouse
[ 5825.522] (II) PIXART USB OPTICAL MOUSE: Adding scrollwheel support
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5825.522] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input11/event1"
[ 5825.522] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE, id 8)
[ 5825.522] (II) PIXART USB OPTICAL MOUSE: initialized for relative axes.
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 5825.522] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 5825.522] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE (/dev/input/mouse0)
[ 5825.522] (II) No input driver/identifier specified (ignoring)
[ 5825.522] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[ 5825.522] (II) No input driver/identifier specified (ignoring)
[ 5825.523] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 5825.523] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 5825.523] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 5825.523] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5825.523] (**) AT Translated Set 2 keyboard: always reports core events
[ 5825.523] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 5825.523] (--) AT Translated Set 2 keyboard: Found keys
[ 5825.523] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 5825.523] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 5825.523] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 5825.523] (**) Option "xkb_rules" "evdev"
[ 5825.523] (**) Option "xkb_model" "pc105"
[ 5825.523] (**) Option "xkb_layout" "be"
[ 5825.523] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 5825.523] (II) No input driver/identifier specified (ignoring)
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-4) (ben at decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-9) ) #1 SMP Tue Sep 20 07:03:13 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=d76ce644-57fa-416b-a8e2-59c0b29cc665 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001a0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32-SLI DELUXE, BIOS ASUS M2N32-SLI DELUXE ACPI BIOS Revision 1903 04/01/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1a0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask 00FF80000000 write-back
[ 0.000000] 1 base 000080000000 mask 00FFC0000000 write-back
[ 0.000000] 2 base 0000BFF00000 mask 00FFFFF00000 uncachable
[ 0.000000] 3 base 000100000000 mask 00FF80000000 write-back
[ 0.000000] 4 base 000180000000 mask 00FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001a0000000 aka 6656M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it.
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5f30] f5f30
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfee0000 @ bfedd000-bfee0000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001a0000000
[ 0.000000] 0100000000 - 0180000000 page 1G
[ 0.000000] 0180000000 - 01a0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1a0000000 @ 19fffe000-1a0000000
[ 0.000000] RAMDISK: 36cec000 - 3766e000
[ 0.000000] ACPI: RSDP 00000000000f7cd0 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000bfee3100 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bfeeb080 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bfee3280 07DA7 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfee0000 00040
[ 0.000000] ACPI: HPET 00000000bfeeb2c0 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bfeeb340 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bfeeb1c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001a0000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001a0000000
[ 0.000000] NODE_DATA [000000019fff9000 - 000000019fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0005bfffff] PMD -> [ffff880199e00000-ffff88019ebfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001a0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfee0
[ 0.000000] 0: 0x00100000 -> 0x001a0000
[ 0.000000] On node 0 totalpages: 1441391
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31
[ 0.000000] Normal zone: 8960 pages used for memmap
[ 0.000000] Normal zone: 646400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
[ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88019fc00000 s78912 r8192 d23488 u524288
[ 0.000000] pcpu-alloc: s78912 r8192 d23488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1418090
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=d76ce644-57fa-416b-a8e2-59c0b29cc665 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 8b92000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 5535476k/6815744k available (3325k kernel code, 1050180k absent, 230088k reserved, 3370k data, 560k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2511.471 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5022.94 BogoMIPS (lpj=10045884)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004096] Security Framework initialized
[ 0.004101] SELinux: Disabled at boot.
[ 0.004788] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.009275] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010868] Mount-cache hash table entries: 256
[ 0.011017] Initializing cgroup subsys cpuacct
[ 0.011022] Initializing cgroup subsys memory
[ 0.011035] Initializing cgroup subsys devices
[ 0.011038] Initializing cgroup subsys freezer
[ 0.011042] Initializing cgroup subsys net_cls
[ 0.011044] Initializing cgroup subsys blkio
[ 0.011088] tseg: 00bff00000
[ 0.011090] CPU: Physical Processor ID: 0
[ 0.011091] CPU: Processor Core ID: 0
[ 0.011093] mce: CPU supports 6 MCE banks
[ 0.011102] using AMD E400 aware idle routine
[ 0.011380] ACPI: Core revision 20110413
[ 0.016949] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056789] CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148024] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148134] #2
[ 0.148135] smpboot cpu 2: start_ip = 9a000
[ 0.240029] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240130] #3 Ok.
[ 0.240131] smpboot cpu 3: start_ip = 9a000
[ 0.332034] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.332054] Brought up 4 CPUs
[ 0.332056] Total of 4 processors activated (20091.58 BogoMIPS).
[ 0.333490] devtmpfs: initialized
[ 0.339148] PM: Registering ACPI NVS region at bfee0000 (12288 bytes)
[ 0.339148] print_constraints: dummy:
[ 0.339148] NET: Registered protocol family 16
[ 0.339148] node 0 link 0: io port [8000, ffff]
[ 0.339148] TOM: 00000000c0000000 aka 3072M
[ 0.339148] Fam 10h mmconf [f0000000, f00fffff]
[ 0.339148] node 0 link 0: mmio [a0000, bffff]
[ 0.339148] node 0 link 0: mmio [c0000000, efffffff]
[ 0.339148] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.339148] node 0 link 0: mmio [f0000000, f04fffff] ==> [f0100000, f04fffff]
[ 0.339148] TOM2: 00000001a0000000 aka 6656M
[ 0.339148] bus: [00, 04] on node 0 link 0
[ 0.339148] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.339148] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.339148] bus: 00 index 2 [mem 0xc0000000-0xefffffff]
[ 0.339148] bus: 00 index 3 [mem 0xf0500000-0xffffffff]
[ 0.339148] bus: 00 index 4 [mem 0xf0100000-0xf04fffff]
[ 0.339148] bus: 00 index 5 [mem 0x1a0000000-0xfcffffffff]
[ 0.339148] Extended Config Space enabled on 1 nodes
[ 0.339148] ACPI: bus type pci registered
[ 0.339148] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.339148] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.346917] PCI: Using configuration type 1 for base access
[ 0.347372] bio: create slab <bio-0> at 0
[ 0.348852] ACPI: EC: Look up EC in DSDT
[ 0.356154] ACPI: Interpreter enabled
[ 0.356159] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.356185] ACPI: Using IOAPIC for interrupt routing
[ 0.363904] ACPI: No dock devices found.
[ 0.363906] HEST: Table not found.
[ 0.363910] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.363973] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.364112] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.364115] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.364117] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.364120] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.364122] pci_root PNP0A08:00: host bridge window [mem 0xbff00000-0xfebfffff]
[ 0.364141] pci 0000:00:00.0: [10de:02f0] type 0 class 0x000500
[ 0.364236] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.364300] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.364370] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.364440] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.364512] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.364593] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.364656] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.364739] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.364787] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.364791] pci 0000:00:04.0: PME# disabled
[ 0.364840] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500
[ 0.365082] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601
[ 0.365192] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05
[ 0.365266] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.365280] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.365325] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.365332] pci 0000:00:09.1: PME# disabled
[ 0.365368] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03
[ 0.365390] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.365481] pci 0000:00:0a.0: supports D1 D2
[ 0.365483] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.365488] pci 0000:00:0a.0: PME# disabled
[ 0.365513] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03
[ 0.365538] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.365633] pci 0000:00:0a.1: supports D1 D2
[ 0.365635] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.365640] pci 0000:00:0a.1: PME# disabled
[ 0.365678] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101
[ 0.365740] pci 0000:00:0c.0: reg 20: [io 0xf400-0xf40f]
[ 0.365811] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101
[ 0.365839] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7]
[ 0.365852] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.365864] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977]
[ 0.365877] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.365889] pci 0000:00:0d.0: reg 20: [io 0xe000-0xe00f]
[ 0.365901] pci 0000:00:0d.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.365981] pci 0000:00:0d.1: [10de:037f] type 0 class 0x000101
[ 0.366009] pci 0000:00:0d.1: reg 10: [io 0x09e0-0x09e7]
[ 0.366021] pci 0000:00:0d.1: reg 14: [io 0x0be0-0x0be3]
[ 0.366034] pci 0000:00:0d.1: reg 18: [io 0x0960-0x0967]
[ 0.366046] pci 0000:00:0d.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.366058] pci 0000:00:0d.1: reg 20: [io 0xcc00-0xcc0f]
[ 0.366071] pci 0000:00:0d.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.366150] pci 0000:00:0d.2: [10de:037f] type 0 class 0x000101
[ 0.366177] pci 0000:00:0d.2: reg 10: [io 0xc800-0xc807]
[ 0.366190] pci 0000:00:0d.2: reg 14: [io 0xc400-0xc403]
[ 0.366202] pci 0000:00:0d.2: reg 18: [io 0xc000-0xc007]
[ 0.366215] pci 0000:00:0d.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.366227] pci 0000:00:0d.2: reg 20: [io 0xb800-0xb80f]
[ 0.366239] pci 0000:00:0d.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 0.366324] pci 0000:00:0e.0: [10de:0370] type 1 class 0x000604
[ 0.366424] pci 0000:00:0e.1: [10de:0371] type 0 class 0x000403
[ 0.366454] pci 0000:00:0e.1: reg 10: [mem 0xfe020000-0xfe023fff]
[ 0.366557] pci 0000:00:0e.1: PME# supported from D3hot D3cold
[ 0.366562] pci 0000:00:0e.1: PME# disabled
[ 0.366614] pci 0000:00:10.0: [10de:0373] type 0 class 0x000680
[ 0.366646] pci 0000:00:10.0: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.366659] pci 0000:00:10.0: reg 14: [io 0xb400-0xb407]
[ 0.366671] pci 0000:00:10.0: reg 18: [mem 0xfe029000-0xfe0290ff]
[ 0.366684] pci 0000:00:10.0: reg 1c: [mem 0xfe028000-0xfe02800f]
[ 0.366761] pci 0000:00:10.0: supports D1 D2
[ 0.366763] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.366769] pci 0000:00:10.0: PME# disabled
[ 0.366811] pci 0000:00:11.0: [10de:0373] type 0 class 0x000680
[ 0.366844] pci 0000:00:11.0: reg 10: [mem 0xfe027000-0xfe027fff]
[ 0.366856] pci 0000:00:11.0: reg 14: [io 0xb000-0xb007]
[ 0.366868] pci 0000:00:11.0: reg 18: [mem 0xfe026000-0xfe0260ff]
[ 0.366881] pci 0000:00:11.0: reg 1c: [mem 0xfe025000-0xfe02500f]
[ 0.366958] pci 0000:00:11.0: supports D1 D2
[ 0.366960] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.366966] pci 0000:00:11.0: PME# disabled
[ 0.367015] pci 0000:00:16.0: [10de:0375] type 1 class 0x000604
[ 0.367098] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.367103] pci 0000:00:16.0: PME# disabled
[ 0.367147] pci 0000:00:17.0: [10de:0377] type 1 class 0x000604
[ 0.367230] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.367235] pci 0000:00:17.0: PME# disabled
[ 0.367259] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.367274] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.367288] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.367301] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.367316] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.367402] pci 0000:01:00.0: [10de:0615] type 0 class 0x000300
[ 0.367420] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.367438] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.367457] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.367469] pci 0000:01:00.0: reg 24: [io 0xac00-0xac7f]
[ 0.367481] pci 0000:01:00.0: reg 30: [mem 0xfbfe0000-0xfbffffff pref]
[ 0.372039] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.372044] pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
[ 0.372048] pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.372053] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.372130] pci 0000:02:0b.0: [104c:8023] type 0 class 0x000c00
[ 0.372155] pci 0000:02:0b.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.372170] pci 0000:02:0b.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.372258] pci 0000:02:0b.0: supports D1 D2
[ 0.372259] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.372265] pci 0000:02:0b.0: PME# disabled
[ 0.372310] pci 0000:00:0e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.372316] pci 0000:00:0e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.372320] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.372325] pci 0000:00:0e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372328] pci 0000:00:0e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.372331] pci 0000:00:0e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.372333] pci 0000:00:0e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.372336] pci 0000:00:0e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.372339] pci 0000:00:0e.0: bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[ 0.372444] pci 0000:03:00.0: [1095:3132] type 0 class 0x000180
[ 0.372479] pci 0000:03:00.0: reg 10: [mem 0xfdeff000-0xfdeff07f 64bit]
[ 0.372507] pci 0000:03:00.0: reg 18: [mem 0xfdef8000-0xfdefbfff 64bit]
[ 0.372525] pci 0000:03:00.0: reg 20: [io 0x9c00-0x9c7f]
[ 0.372560] pci 0000:03:00.0: reg 30: [mem 0xfde00000-0xfde7ffff pref]
[ 0.372613] pci 0000:03:00.0: supports D1 D2
[ 0.372647] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.372660] pci 0000:00:16.0: PCI bridge to [bus 03-03]
[ 0.372667] pci 0000:00:16.0: bridge window [io 0x9000-0x9fff]
[ 0.372672] pci 0000:00:16.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.372680] pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.372778] pci 0000:04:00.0: [10de:0615] type 0 class 0x000300
[ 0.372798] pci 0000:04:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.372819] pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.372840] pci 0000:04:00.0: reg 1c: [mem 0xf4000000-0xf5ffffff 64bit]
[ 0.372854] pci 0000:04:00.0: reg 24: [io 0x8c00-0x8c7f]
[ 0.372868] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.380037] pci 0000:00:17.0: PCI bridge to [bus 04-04]
[ 0.380045] pci 0000:00:17.0: bridge window [io 0x8000-0x8fff]
[ 0.380050] pci 0000:00:17.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.380057] pci 0000:00:17.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.380082] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.380413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.380586] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.380589] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.380591] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.417889] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 *11 14 15)
[ 0.417943] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418000] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418060] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418122] ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)
[ 0.418181] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
[ 0.418241] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 0.418303] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418363] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418425] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418487] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 0.418551] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[ 0.418611] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.418670] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418733] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418794] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418849] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.418908] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.418970] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.419023] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.419130] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.419223] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.419327] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.419422] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.419512] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.419604] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.419700] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.419790] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.419881] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.419981] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.420098] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.420197] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.420290] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.420386] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.420484] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.420576] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.420669] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.420760] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.420856] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.420948] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.421079] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.421087] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=none,locks=none
[ 0.421089] vgaarb: loaded
[ 0.421090] vgaarb: bridge control possible 0000:04:00.0
[ 0.421092] vgaarb: bridge control possible 0000:01:00.0
[ 0.421127] PCI: Using ACPI for IRQ routing
[ 0.424376] PCI: pci_cache_line_size set to 64 bytes
[ 0.424508] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.424512] reserve RAM buffer: 00000000bfee0000 - 00000000bfffffff
[ 0.424624] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.424634] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.424638] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.432088] Switching to clocksource hpet
[ 0.433643] pnp: PnP ACPI init
[ 0.433657] ACPI: bus type pnp registered
[ 0.433763] pnp 00:00: [bus 00-ff]
[ 0.433765] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.433768] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.433770] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.433772] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.433774] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.433777] pnp 00:00: [mem 0xbff00000-0xfebfffff window]
[ 0.433834] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.433854] pnp 00:01: [io 0x1000-0x107f]
[ 0.433856] pnp 00:01: [io 0x1080-0x10ff]
[ 0.433858] pnp 00:01: [io 0x1400-0x147f]
[ 0.433860] pnp 00:01: [io 0x1480-0x14ff]
[ 0.433861] pnp 00:01: [io 0x1800-0x187f]
[ 0.433863] pnp 00:01: [io 0x1880-0x18ff]
[ 0.433918] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.433921] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.433923] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.433926] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.433928] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.433931] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.433934] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434011] pnp 00:02: [io 0x0010-0x001f]
[ 0.434014] pnp 00:02: [io 0x0022-0x003f]
[ 0.434016] pnp 00:02: [io 0x0044-0x005f]
[ 0.434018] pnp 00:02: [io 0x0062-0x0063]
[ 0.434019] pnp 00:02: [io 0x0065-0x006f]
[ 0.434021] pnp 00:02: [io 0x0074-0x007f]
[ 0.434023] pnp 00:02: [io 0x0091-0x0093]
[ 0.434025] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.434027] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.434029] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.434031] pnp 00:02: [io 0x0800-0x087f]
[ 0.434033] pnp 00:02: [io 0x0290-0x0297]
[ 0.434111] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.434114] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.434119] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.434122] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434134] pnp 00:03: [dma 4]
[ 0.434136] pnp 00:03: [io 0x0000-0x000f]
[ 0.434138] pnp 00:03: [io 0x0080-0x0090]
[ 0.434140] pnp 00:03: [io 0x0094-0x009f]
[ 0.434142] pnp 00:03: [io 0x00c0-0x00df]
[ 0.434174] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.434235] pnp 00:04: [irq 0 disabled]
[ 0.434253] pnp 00:04: [irq 8]
[ 0.434255] pnp 00:04: [mem 0xfefff000-0xfefff3ff]
[ 0.434289] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.434320] pnp 00:05: [io 0x0070-0x0073]
[ 0.434354] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.434365] pnp 00:06: [io 0x0061]
[ 0.434397] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.434409] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.434422] pnp 00:07: [irq 13]
[ 0.434456] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.434824] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.434837] pnp 00:08: [irq 4]
[ 0.434900] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.435304] pnp 00:09: [io 0x0378-0x037f]
[ 0.435317] pnp 00:09: [irq 7]
[ 0.435369] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.435497] pnp 00:0a: [io 0x0060]
[ 0.435499] pnp 00:0a: [io 0x0064]
[ 0.435511] pnp 00:0a: [irq 1]
[ 0.435553] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.435785] Switched to NOHz mode on CPU #0
[ 0.435862] Switched to NOHz mode on CPU #2
[ 0.435868] Switched to NOHz mode on CPU #1
[ 0.435915] Switched to NOHz mode on CPU #3
[ 0.436278] pnp 00:0b: [mem 0xf0000000-0xf3ffffff]
[ 0.436357] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.436360] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436519] pnp 00:0c: [mem 0x000cd200-0x000cffff]
[ 0.436522] pnp 00:0c: [mem 0x000f0000-0x000f7fff]
[ 0.436524] pnp 00:0c: [mem 0x000f8000-0x000fbfff]
[ 0.436526] pnp 00:0c: [mem 0x000fc000-0x000fffff]
[ 0.436528] pnp 00:0c: [mem 0xfefff000-0xfefff0ff]
[ 0.436530] pnp 00:0c: [mem 0xbfee0000-0xbfefffff]
[ 0.436532] pnp 00:0c: [mem 0xffff0000-0xffffffff]
[ 0.436534] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.436536] pnp 00:0c: [mem 0x00100000-0xbfedffff]
[ 0.436538] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.436540] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 0.436542] pnp 00:0c: [mem 0xfefff000-0xfeffffff]
[ 0.436544] pnp 00:0c: [mem 0xfff80000-0xfff80fff]
[ 0.436546] pnp 00:0c: [mem 0xfff90000-0xfffbffff]
[ 0.436548] pnp 00:0c: [mem 0xfffed000-0xfffeffff]
[ 0.436633] system 00:0c: [mem 0x000cd200-0x000cffff] has been reserved
[ 0.436640] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.436643] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.436646] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.436649] system 00:0c: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.436651] system 00:0c: [mem 0xbfee0000-0xbfefffff] could not be reserved
[ 0.436654] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.436657] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.436659] system 00:0c: [mem 0x00100000-0xbfedffff] could not be reserved
[ 0.436662] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.436665] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.436668] system 00:0c: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.436670] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.436674] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.436677] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.436680] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.436689] pnp: PnP ACPI: found 13 devices
[ 0.436690] ACPI: ACPI bus type pnp unregistered
[ 0.442852] PCI: max bus depth: 1 pci_try_num: 2
[ 0.442888] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.442891] pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
[ 0.442896] pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.442899] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.442905] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.442907] pci 0000:00:0e.0: bridge window [io disabled]
[ 0.442913] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.442917] pci 0000:00:0e.0: bridge window [mem pref disabled]
[ 0.442925] pci 0000:00:16.0: PCI bridge to [bus 03-03]
[ 0.442928] pci 0000:00:16.0: bridge window [io 0x9000-0x9fff]
[ 0.442934] pci 0000:00:16.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.442939] pci 0000:00:16.0: bridge window [mem pref disabled]
[ 0.442949] pci 0000:04:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref]
[ 0.442951] pci 0000:00:17.0: PCI bridge to [bus 04-04]
[ 0.442955] pci 0000:00:17.0: bridge window [io 0x8000-0x8fff]
[ 0.442961] pci 0000:00:17.0: bridge window [mem 0xf4000000-0xf7ffffff]
[ 0.442965] pci 0000:00:17.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.442979] pci 0000:00:04.0: setting latency timer to 64
[ 0.442986] pci 0000:00:0e.0: setting latency timer to 64
[ 0.442996] pci 0000:00:16.0: setting latency timer to 64
[ 0.443005] pci 0000:00:17.0: setting latency timer to 64
[ 0.443008] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.443011] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.443013] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.443015] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.443017] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.443019] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.443021] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.443024] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.443026] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.443028] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.443030] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.443032] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.443038] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.443040] pci_bus 0000:02: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.443043] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.443045] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.443047] pci_bus 0000:04: resource 0 [io 0x8000-0x8fff]
[ 0.443049] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf7ffffff]
[ 0.443051] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.443212] NET: Registered protocol family 2
[ 0.443598] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.445871] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.449356] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.449766] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.449769] TCP reno registered
[ 0.449790] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.449871] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.450137] NET: Registered protocol family 1
[ 0.450184] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.450194] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.450269] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.520201] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.520290] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.520377] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.520469] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.520566] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.520685] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.520822] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.520977] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.521150] pci 0000:00:08.0: Found enabled HT MSI Mapping
[ 0.521179] pci 0000:01:00.0: Boot video device
[ 0.521209] PCI: CLS 32 bytes, default 64
[ 0.521261] Unpacking initramfs...
[ 0.743685] Freeing initrd memory: 9736k freed
[ 0.749626] PCI-DMA: Disabling AGP.
[ 0.749737] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.749738] PCI-DMA: using GART IOMMU.
[ 0.749742] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.754137] audit: initializing netlink socket (disabled)
[ 0.754153] type=2000 audit(1317288170.748:1): initialized
[ 0.779307] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.806360] VFS: Disk quotas dquot_6.5.2
[ 0.806423] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.806513] msgmni has been set to 10959
[ 0.806771] alg: No test for stdrng (krng)
[ 0.806822] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.806826] io scheduler noop registered
[ 0.806828] io scheduler deadline registered
[ 0.806874] io scheduler cfq registered (default)
[ 0.807052] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.807098] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.807232] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.807296] pcieport 0000:00:16.0: irq 41 for MSI/MSI-X
[ 0.807425] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.807490] pcieport 0000:00:17.0: irq 42 for MSI/MSI-X
[ 0.807704] ERST: Table is not found!
[ 0.807785] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.828565] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.005048] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.005374] Linux agpgart interface v0.103
[ 1.005498] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.005500] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.005681] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.005775] mousedev: PS/2 mouse device common for all mice
[ 1.005841] rtc_cmos 00:05: RTC can wake from S4
[ 1.005978] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.006035] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.006046] cpuidle: using governor ladder
[ 1.006048] cpuidle: using governor menu
[ 1.006344] TCP cubic registered
[ 1.006481] NET: Registered protocol family 10
[ 1.007159] Mobile IPv6
[ 1.007161] NET: Registered protocol family 17
[ 1.007165] Registering the dns_resolver key type
[ 1.007264] PM: Hibernation image not present or could not be loaded.
[ 1.007273] registered taskstats version 1
[ 1.021289] rtc_cmos 00:05: setting system clock to 2011-09-29 09:22:51 UTC (1317288171)
[ 1.021340] Initializing network drop monitor service
[ 1.022502] Freeing unused kernel memory: 560k freed
[ 1.022638] Write protecting the kernel read-only data: 6144k
[ 1.026599] Freeing unused kernel memory: 752k freed
[ 1.030419] Freeing unused kernel memory: 720k freed
[ 1.041752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.043386] udevd[94]: starting version 172
[ 1.067741] SCSI subsystem initialized
[ 1.069137] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110413/nspredef-456)
[ 1.069145] ACPI: [Package] has zero elements (ffff880196610600)
[ 1.069216] ACPI: Invalid passive threshold
[ 1.069382] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.069385] ACPI: Thermal Zone [THRM] (40 C)
[ 1.074561] usbcore: registered new interface driver usbfs
[ 1.074592] usbcore: registered new interface driver hub
[ 1.079375] ACPI: Fan [FAN] (on)
[ 1.079947] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.080235] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 1.080261] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 1.080269] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.084207] usbcore: registered new device driver usb
[ 1.085064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.086802] libata version 3.00 loaded.
[ 1.100353] sata_sil24 0000:03:00.0: version 1.1
[ 1.100566] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 1.100590] sata_sil24 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 1.100671] sata_sil24 0000:03:00.0: setting latency timer to 64
[ 1.101288] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 1.101292] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 1.101353] scsi0 : sata_sil24
[ 1.101497] scsi1 : sata_sil24
[ 1.101539] ata1: SATA max UDMA/100 host m128 at 0xfdeff000 port 0xfdef8000 irq 16
[ 1.101544] ata2: SATA max UDMA/100 host m128 at 0xfdeff000 port 0xfdefa000 irq 16
[ 1.156146] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.604844] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1f:c6:6c:af:fa
[ 1.604848] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.605163] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 22
[ 1.605185] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 22 (level, low) -> IRQ 22
[ 1.605191] forcedeth 0000:00:11.0: setting latency timer to 64
[ 1.656115] firewire_core: created device fw0: GUID 001e8c00013220e8, S400
[ 1.752036] Refined TSC clocksource calibration: 2511.430 MHz.
[ 1.752042] Switching to clocksource tsc
[ 2.128823] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1f:c6:6c:bc:e4
[ 2.128826] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.129071] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 2.129089] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 2.129106] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 2.129110] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.129136] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 2.129167] ehci_hcd 0000:00:0a.1: debug port 1
[ 2.129181] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 2.129210] ehci_hcd 0000:00:0a.1: irq 21, io mem 0xfe02e000
[ 2.140021] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 2.140043] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.140046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.140048] usb usb1: Product: EHCI Host Controller
[ 2.140050] usb usb1: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd
[ 2.140052] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.140178] hub 1-0:1.0: USB hub found
[ 2.140183] hub 1-0:1.0: 10 ports detected
[ 2.140339] sata_nv 0000:00:0d.0: version 3.5
[ 2.140489] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 2.140504] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 2.140506] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 2.141399] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.141727] scsi2 : sata_nv
[ 2.141794] scsi3 : sata_nv
[ 2.141920] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 20
[ 2.141924] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 20
[ 2.142148] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 2.142153] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 2.142156] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.143044] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 2.143358] scsi4 : sata_nv
[ 2.143423] scsi5 : sata_nv
[ 2.143544] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23
[ 2.143547] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23
[ 2.143759] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 22
[ 2.143764] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 22 (level, low) -> IRQ 22
[ 2.143767] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 2.144675] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 2.144984] scsi6 : sata_nv
[ 2.145052] scsi7 : sata_nv
[ 2.145175] ata7: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 22
[ 2.145178] ata8: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 22
[ 2.145347] pata_amd 0000:00:0c.0: version 0.4.1
[ 2.145388] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 2.145692] scsi8 : pata_amd
[ 2.145748] scsi9 : pata_amd
[ 2.146160] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.146162] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.452051] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.608045] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.612044] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.620021] usb 1-9: new high speed USB device number 4 using ehci_hcd
[ 2.620424] ata7.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
[ 2.636413] ata7.00: configured for UDMA/100
[ 2.656613] ata3.00: ATA-8: WDC WD5000AACS-00G8B0, 05.04C05, max UDMA/133
[ 2.656616] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.664597] ata3.00: configured for UDMA/133
[ 2.758735] usb 1-9: New USB device found, idVendor=0bda, idProduct=8187
[ 2.758737] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.758740] usb 1-9: Product: RTL8187_Wireless
[ 2.758742] usb 1-9: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 2.758744] usb 1-9: SerialNumber: 0015AF649302
[ 3.180045] ata1: SATA link down (SStatus 0 SControl 0)
[ 5.260050] ata2: SATA link down (SStatus 0 SControl 0)
[ 5.260237] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AACS-0 05.0 PQ: 0 ANSI: 5
[ 5.728048] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.737317] ata4.00: ATA-8: WDC WD5000AACS-00G8B0, 05.04C05, max UDMA/133
[ 5.737320] ata4.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 5.745305] ata4.00: configured for UDMA/133
[ 5.745419] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AACS-0 05.0 PQ: 0 ANSI: 5
[ 6.056020] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.056920] scsi 6:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5
[ 6.368024] ata8: SATA link down (SStatus 0 SControl 300)
[ 6.368113] ata10: port disabled. ignoring.
[ 6.368664] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.370376] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 6.370383] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21
[ 6.370423] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 6.370427] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 6.370450] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 6.370479] ohci_hcd 0000:00:0a.0: irq 21, io mem 0xfe02f000
[ 6.373601] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.373607] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.373807] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.373819] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 6.373839] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 6.373854] sd 2:0:0:0: [sda] Write Protect is off
[ 6.373857] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.373879] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.373922] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.373927] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.373970] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.387246] sda: sda1 sda2
[ 6.387477] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.393781] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 6.393828] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 6.393864] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 6.398615] sdb: sdb1 sdb2 < sdb5 > sdb3
[ 6.398979] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 6.426064] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.426069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.426072] usb usb2: Product: OHCI Host Controller
[ 6.426074] usb usb2: Manufacturer: Linux 3.0.0-1-amd64 ohci_hcd
[ 6.426075] usb usb2: SerialNumber: 0000:00:0a.0
[ 6.426221] hub 2-0:1.0: USB hub found
[ 6.426229] hub 2-0:1.0: 10 ports detected
[ 6.808022] usb 2-1: new low speed USB device number 2 using ohci_hcd
[ 7.020079] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[ 7.020083] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.020086] usb 2-1: Product: USB OPTICAL MOUSE
[ 7.020088] usb 2-1: Manufacturer: PIXART
[ 7.034246] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input1
[ 7.034338] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0a.0-1/input0
[ 7.034355] usbcore: registered new interface driver usbhid
[ 7.034356] usbhid: USB HID core driver
[ 7.076194] PM: Starting manual resume from disk
[ 7.076198] PM: Hibernation image partition 8:21 present
[ 7.076199] PM: Looking for hibernation image.
[ 7.076415] PM: Image not found (code -22)
[ 7.076419] PM: Hibernation image not present or could not be loaded.
[ 7.096235] EXT3-fs: barriers not enabled
[ 7.109604] kjournald starting. Commit interval 5 seconds
[ 7.109646] EXT3-fs (sdb1): mounted filesystem with ordered data mode
[ 7.200024] usb 2-2: new full speed USB device number 3 using ohci_hcd
[ 7.425065] usb 2-2: New USB device found, idVendor=0a5c, idProduct=4500
[ 7.425069] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.425072] usb 2-2: Product: BCM2045B2
[ 7.425074] usb 2-2: Manufacturer: Broadcom
[ 7.428104] hub 2-2:1.0: USB hub found
[ 7.431066] hub 2-2:1.0: 3 ports detected
[ 7.729064] usb 2-2.1: new full speed USB device number 4 using ohci_hcd
[ 7.853069] usb 2-2.1: New USB device found, idVendor=0a5c, idProduct=2100
[ 7.853074] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7.853076] usb 2-2.1: Product: BCM2045A
[ 7.853078] usb 2-2.1: Manufacturer: Broadcom Corp
[ 7.853080] usb 2-2.1: SerialNumber: 000000000000
[ 8.463425] udevd[398]: starting version 172
[ 9.130556] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 9.130564] ACPI: Power Button [PWRB]
[ 9.130664] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 9.130667] ACPI: Power Button [PWRF]
[ 9.203971] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.373312] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 9.373335] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[ 9.536466] MCE: In-kernel MCE decoding enabled.
[ 9.585747] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 9.621122] ACPI: acpi_idle registered with cpuidle
[ 9.645218] parport_pc 00:09: reported by Plug and Play ACPI
[ 9.645259] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 9.692173] EDAC MC: Ver: 2.1.0
[ 9.725866] AMD64 EDAC driver v3.4.0
[ 9.726072] EDAC amd64: DRAM ECC disabled.
[ 9.726080] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.726081] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.726082] (Note that use of the override may cause unknown side effects.)
[ 9.816888] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 9.816992] NV_TCO: Watchdog reboot not detected.
[ 9.817074] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 10.010094] Bluetooth: Core ver 2.16
[ 10.010118] NET: Registered protocol family 31
[ 10.010120] Bluetooth: HCI device and connection manager initialized
[ 10.010123] Bluetooth: HCI socket layer initialized
[ 10.010125] Bluetooth: L2CAP socket layer initialized
[ 10.010198] Bluetooth: SCO socket layer initialized
[ 10.026918] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.027123] usbcore: registered new interface driver btusb
[ 10.552794] cfg80211: Calling CRDA to update world regulatory domain
[ 10.772606] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 10.772614] HDA Intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 10.772618] hda_intel: msi for device 1043:81f6 set to 0
[ 10.772652] HDA Intel 0000:00:0e.1: setting latency timer to 64
[ 11.030313] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.030943] ieee80211 phy0: hwaddr 00:15:af:64:93:02, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
[ 11.042378] rtl8187: Customer ID is 0x00
[ 11.042417] Registered led device: rtl8187-phy0::radio
[ 11.042440] Registered led device: rtl8187-phy0::tx
[ 11.042482] Registered led device: rtl8187-phy0::rx
[ 11.042866] rtl8187: wireless switch is on
[ 11.042927] usbcore: registered new interface driver rtl8187
[ 11.739742] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input5
[ 11.906282] Disabling lock debugging due to kernel taint
[ 11.906290] nvidia: module license 'NVIDIA' taints kernel.
[ 12.419901] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 12.419909] nvidia 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 12.419922] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.419929] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.419931] vgaarb: transferring owner from PCI:0000:01:00.0 to PCI:0000:04:00.0
[ 12.420211] nvidia 0000:04:00.0: enabling device (0000 -> 0003)
[ 12.420344] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 12.420347] nvidia 0000:04:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 12.420356] nvidia 0000:04:00.0: setting latency timer to 64
[ 12.420363] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 12.420564] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 275.28 Wed Aug 31 16:56:51 PDT 2011
[ 13.202795] Adding 8843744k swap on /dev/sdb5. Priority:-1 extents:1 across:8843744k
[ 13.463578] EXT3-fs (sdb1): using internal journal
[ 13.603149] loop: module loaded
[ 13.863738] EXT3-fs: barriers not enabled
[ 13.874545] kjournald starting. Commit interval 5 seconds
[ 13.874688] EXT3-fs (sdb3): warning: maximal mount count reached, running e2fsck is recommended
[ 13.875328] EXT3-fs (sdb3): using internal journal
[ 13.875332] EXT3-fs (sdb3): mounted filesystem with ordered data mode
[ 14.768016] RPC: Registered named UNIX socket transport module.
[ 14.768019] RPC: Registered udp transport module.
[ 14.768021] RPC: Registered tcp transport module.
[ 14.768022] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.822332] FS-Cache: Loaded
[ 14.867251] FS-Cache: Netfs 'nfs' registered for caching
[ 14.881963] Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
[ 15.457537] fuse init (API version 7.16)
[ 20.198551] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.202329] forcedeth 0000:00:10.0: irq 43 for MSI/MSI-X
[ 20.260840] forcedeth 0000:00:11.0: irq 44 for MSI/MSI-X
[ 20.261085] forcedeth 0000:00:11.0: eth1: no link during initialization
[ 20.262485] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.289264] Bluetooth: RFCOMM TTY layer initialized
[ 21.289270] Bluetooth: RFCOMM socket layer initialized
[ 21.289272] Bluetooth: RFCOMM ver 1.11
[ 21.318526] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.318529] Bluetooth: BNEP filters: protocol multicast
[ 22.601927] lp0: using parport0 (interrupt-driven).
[ 22.837960] ppdev: user-space parallel port driver
[ 25.209899] FS-Cache: Netfs 'cifs' registered for caching
[ 25.304447] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.1
[ 25.343501] powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[ 25.343514] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 25.343516] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 26.020804] NVRM: Xid (0000:04:00): 54
[ 30.336080] eth0: no IPv6 routers present
[ 363.297021] exe (2858): /proc/2858/oom_adj is deprecated, please use /proc/2858/oom_score_adj instead.
[ 3759.395753] wmi: Mapper loaded
[ 3759.423262] [drm] Initialized drm 1.1.0 20060810
[ 3818.786411] usb 2-1: USB disconnect, device number 2
[ 3820.536031] usb 2-1: new low speed USB device number 5 using ohci_hcd
[ 3820.736355] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[ 3820.736359] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3820.736362] usb 2-1: Product: USB OPTICAL MOUSE
[ 3820.736364] usb 2-1: Manufacturer: PIXART
[ 3820.749537] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input6
[ 3820.749679] generic-usb 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0a.0-1/input0
[ 3880.810431] usb 2-1: USB disconnect, device number 5
[ 3882.548022] usb 2-1: new low speed USB device number 6 using ohci_hcd
[ 3882.760376] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[ 3882.760380] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3882.760383] usb 2-1: Product: USB OPTICAL MOUSE
[ 3882.760385] usb 2-1: Manufacturer: PIXART
[ 3882.773546] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input7
[ 3882.773674] generic-usb 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0a.0-1/input0
[ 3942.834444] usb 2-1: USB disconnect, device number 6
[ 3944.584011] usb 2-1: new low speed USB device number 7 using ohci_hcd
[ 3944.796391] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[ 3944.796395] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3944.796398] usb 2-1: Product: USB OPTICAL MOUSE
[ 3944.796400] usb 2-1: Manufacturer: PIXART
[ 3944.809634] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input8
[ 3944.809794] generic-usb 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0a.0-1/input0
[ 4004.826473] usb 2-1: USB disconnect, device number 7
[ 4006.576012] usb 2-1: new low speed USB device number 8 using ohci_hcd
[ 4006.788418] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[ 4006.788422] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4006.788425] usb 2-1: Product: USB OPTICAL MOUSE
[ 4006.788427] usb 2-1: Manufacturer: PIXART
[ 4006.801612] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input9
[ 4006.801762] generic-usb 0003:093A:2510.0005: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0a.0-1/input0
[ 4066.874494] usb 2-1: USB disconnect, device number 8
[ 4068.624011] usb 2-1: new low speed USB device number 9 using ohci_hcd
[ 4068.836438] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[ 4068.836443] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4068.836446] usb 2-1: Product: USB OPTICAL MOUSE
[ 4068.836448] usb 2-1: Manufacturer: PIXART
[ 4068.849622] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input10
[ 4068.849765] generic-usb 0003:093A:2510.0006: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0a.0-1/input0
[ 4128.898515] usb 2-1: USB disconnect, device number 9
[ 4130.652024] usb 2-1: new low speed USB device number 10 using ohci_hcd
[ 4130.864459] usb 2-1: New USB device found, idVendor=093a, idProduct=2510
[ 4130.864464] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4130.864467] usb 2-1: Product: USB OPTICAL MOUSE
[ 4130.864469] usb 2-1: Manufacturer: PIXART
[ 4130.877637] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input11
[ 4130.877781] generic-usb 0003:093A:2510.0007: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:0a.0-1/input0
[ 4158.193836] NVRM: Xid (0000:04:00): 54
[ 4396.471319] NVRM: Xid (0000:04:00): 54
[ 4561.444845] NVRM: Xid (0000:04:00): 54
More information about the pkg-nvidia-devel
mailing list