Bug#1025861: pulseaudio: Pulseaudio dies after boot
Paul H. Sonnenschein
paul at sonnenschein.ruhr
Sat Dec 10 16:49:48 GMT 2022
Package: pulseaudio
Version: 16.1+dfsg1-2+b1
Severity: important
-- Observed behavior:
The GNOME-based system does not recognize any speakers after boot.
Apparently, the cause is that Pulseaudio died:
> $ systemctl --user status pulseaudio
> ○ pulseaudio.service - Sound Service
> Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled;
preset:>
> Active: inactive (dead)
> TriggeredBy: ○ pulseaudio.socket
and I could not find any relevant log entry.
However, after a restart, Pulseaudio works successfully:
> $ systemctl --user restart pulseaudio
[Some time passed between executing these commands]
> $ systemctl --user status pulseaudio.service
> ● pulseaudio.service - Sound Service
> Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled;
preset: enabled)
> Active: active (running) since Sat 2022-12-10 17:11:47 CET; 9min ago
> TriggeredBy: ● pulseaudio.socket
> Main PID: 3239 (pulseaudio)
> Tasks: 3 (limit: 18351)
> Memory: 24.3M
> CPU: 177ms
> CGroup:
/user.slice/user-1000.slice/user at 1000.service/session.slice/pulseaudio.service
> └─3239 /usr/bin/pulseaudio --daemonize=no --log-target=journal
>
> Dez 10 17:11:47 debian-lenovo-paul systemd[2026]: Starting Sound Service...
> Dez 10 17:11:47 debian-lenovo-paul pulseaudio[3239]: Stale PID file,
overwriting.
> Dez 10 17:11:47 debian-lenovo-paul systemd[2026]: Started Sound Service.
> Dez 10 17:11:47 debian-lenovo-paul pulseaudio[3239]: Could not find
org.bluez.BatteryProviderManager1.RegisterBatteryProvider(), is bluetoothd
started with experimental features enabled (-E flag)?
-- Expected behavior:
Pulseaudio just works without requiring manual restart.
-- Suspected causes:
There are two events that happened roughly at the time the issue first
appeared:
- I upgraded a lot of packets recently, though they do not appear to have
included pulseaudio.
- I ran out of disk space on my home partition recently.
-- Attempted fixes:
- I reinstalled most packages whose names included pulse or alsa.
- I moved ~/.config/pulse/ to ~/.config/pulse~/
-- Final notes:
While I saw some similiar bug reports, these seemed at least slightly
different,
so I have chosen to create a new one.
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: bookworm/sid
APT prefers testing
APT policy: (600, 'testing'), (500, 'testing-debug'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 6.0.0-5-amd64 (SMP w/6 CPU threads; PREEMPT)
Kernel taint flags: TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages pulseaudio depends on:
ii adduser 3.129
ii init-system-helpers 1.65.2
ii libasound2 1.2.8-1
ii libasound2-plugins 1.2.7.1-1
ii libc6 2.36-6
ii libcap2 1:2.44-1
ii libdbus-1-3 1.14.4-1
ii libfftw3-single3 3.3.10-1
ii libgcc-s1 12.2.0-9
ii libglib2.0-0 2.74.2-1
ii libgstreamer-plugins-base1.0-0 1.20.4-1
ii libgstreamer1.0-0 1.20.4-1
ii libice6 2:1.0.10-1
ii libltdl7 2.4.7-5
ii liborc-0.4-0 1:0.4.32-2
ii libpulse0 16.1+dfsg1-2+b1
ii libsm6 2:1.2.3-1
ii libsndfile1 1.1.0-3+b1
ii libsoxr0 0.1.3-4
ii libspeexdsp1 1.2.1-1
ii libstdc++6 12.2.0-9
ii libsystemd0 252.2-1
ii libtdb1 1.4.7-2
ii libudev1 252.2-1
ii libwebrtc-audio-processing1 0.3-1+b1
ii libwrap0 7.6.q-31
ii libx11-6 2:1.8.1-2
ii libx11-xcb1 2:1.8.1-2
ii libxcb1 1.15-1
ii libxtst6 2:1.2.3-1.1
ii lsb-base 11.5
ii pulseaudio-utils 16.1+dfsg1-2+b1
ii sysvinit-utils [lsb-base] 3.05-7
Versions of packages pulseaudio recommends:
ii dbus-user-session 1.14.4-1
ii libpam-systemd [logind] 252.2-1
ii rtkit 0.13-4+b1
Versions of packages pulseaudio suggests:
pn paprefs <none>
pn pavucontrol <none>
pn pavumeter <none>
ii udev 252.2-1
-- no debconf information
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; auto-connect-localhost = no
; auto-connect-display = no
-------------- next part --------------
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; enable-memfd = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
; resample-method = speex-float-1
; avoid-resampling = false
; enable-remixing = yes
; remixing-use-all-sink-channels = yes
; remixing-produce-lfe = no
; remixing-consume-lfe = no
; lfe-crossover-freq = 0
; flat-volumes = no
; rescue-streams = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 200000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
.fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GSettings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gsettings.so
.nofail
load-module module-gsettings
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
### Make some devices default
#set-default-sink output
#set-default-source input
### Allow including a default.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail
.include /etc/pulse/default.pa.d
-------------- next part --------------
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev/hal support)
load-module module-detect
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
### Allow including a system.pa.d directory, which if present, can be used
### for additional configuration snippets.
### Note that those snippet files must have a .pa file extension, not .conf
.nofail
.include /etc/pulse/system.pa.d
-------------- next part --------------
null
Discard all samples (playback) or generate zero samples (capture)
default
Playback/recording through the PulseAudio sound server
lavrate
Rate Converter Plugin Using Libav/FFmpeg Library
samplerate
Rate Converter Plugin Using Samplerate Library
speexrate
Rate Converter Plugin Using Speex Resampler
jack
JACK Audio Connection Kit
oss
Open Sound System
pulse
PulseAudio Sound Server
speex
Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
upmix
Plugin for channel upmix (4,6,8)
vdownmix
Plugin for channel downmix (stereo) with a simple spacialization
hw:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Direct hardware device without any conversions
hw:CARD=Generic,DEV=7
HD-Audio Generic, HDMI 1
Direct hardware device without any conversions
hw:CARD=Generic,DEV=8
HD-Audio Generic, HDMI 2
Direct hardware device without any conversions
plughw:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Hardware device with all software conversions
plughw:CARD=Generic,DEV=7
HD-Audio Generic, HDMI 1
Hardware device with all software conversions
plughw:CARD=Generic,DEV=8
HD-Audio Generic, HDMI 2
Hardware device with all software conversions
hdmi:CARD=Generic,DEV=0
HD-Audio Generic, HDMI 0
HDMI Audio Output
hdmi:CARD=Generic,DEV=1
HD-Audio Generic, HDMI 1
HDMI Audio Output
hdmi:CARD=Generic,DEV=2
HD-Audio Generic, HDMI 2
HDMI Audio Output
dmix:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Direct sample mixing device
dmix:CARD=Generic,DEV=7
HD-Audio Generic, HDMI 1
Direct sample mixing device
dmix:CARD=Generic,DEV=8
HD-Audio Generic, HDMI 2
Direct sample mixing device
usbstream:CARD=Generic
HD-Audio Generic
USB Stream Output
hw:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
Direct hardware device without any conversions
plughw:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
Hardware device with all software conversions
sysdefault:CARD=Generic_1
HD-Audio Generic, ALC257 Analog
Default Audio Device
front:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
Front output / input
surround21:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=Generic_1,DEV=0
HD-Audio Generic, ALC257 Analog
Direct sample mixing device
usbstream:CARD=Generic_1
HD-Audio Generic
USB Stream Output
-------------- next part --------------
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "16.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "16.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "16.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "16.1"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.description = "Switches ports and profiles when devices are plugged/unplugged"
module.version = "16.1"
Module #5
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "16.1"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_06_00.1" card_name="alsa_card.pci-0000_06_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "16.1"
Module #7
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_06_00.6" card_name="alsa_card.pci-0000_06_00.6" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"
Usage counter: 0
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "16.1"
Module #8
Name: module-bluetooth-policy
Argument:
Usage counter: n/a
Properties:
module.author = "Frédéric Dalleau, Pali Rohár"
module.description = "Policy module to make using bluetooth devices out-of-the-box easier"
module.version = "16.1"
Module #9
Name: module-bluetooth-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available Bluetooth daemon and load the corresponding discovery module"
module.version = "16.1"
Module #10
Name: module-bluez5-discover
Argument:
Usage counter: n/a
Properties:
module.author = "João Paulo Rechi Vita"
module.description = "Detect available BlueZ 5 Bluetooth audio devices and load BlueZ 5 Bluetooth audio drivers"
module.version = "16.1"
Module #11
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "16.1"
Module #12
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink and source"
module.version = "16.1"
Module #13
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Hält stets ein Ziel geladen, selbst wenn dies ein Null-Ziel ist"
module.version = "16.1"
Module #14
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based on intended roles of devices"
module.version = "16.1"
Module #15
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long, suspend it"
module.version = "16.1"
Module #16
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of this user"
module.version = "16.1"
Module #17
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them."
module.version = "16.1"
Module #18
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles while others exist"
module.version = "16.1"
Module #19
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "16.1"
Module #20
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when needed"
module.version = "16.1"
Sink #0
State: SUSPENDED
Name: alsa_output.pci-0000_06_00.6.analog-stereo
Description: Family 17h/19h HD Audio Controller Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: yes
Volume: front-left: 33805 / 52% / -17.25 dB, front-right: 33805 / 52% / -17.25 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_06_00.6.analog-stereo.monitor
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC257 Analog"
alsa.id = "ALC257 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd3c0000 irq 77"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:06:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h/19h HD Audio Controller"
device.string = "front:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output-speaker: Speakers (type: Speaker, priority: 10000, availability unknown)
analog-output-headphones: Headphones (type: Headphones, priority: 9900, not available)
Active Port: analog-output-speaker
Formats:
pcm
Source #0
State: SUSPENDED
Name: alsa_output.pci-0000_06_00.6.analog-stereo.monitor
Description: Monitor of Family 17h/19h HD Audio Controller Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_06_00.6.analog-stereo
Latency: 0 usec, configured 0 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Family 17h/19h HD Audio Controller Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd3c0000 irq 77"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:06:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h/19h HD Audio Controller"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: SUSPENDED
Name: alsa_input.pci-0000_06_00.6.analog-stereo
Description: Family 17h/19h HD Audio Controller Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 15542 / 24% / -37.50 dB, front-right: 15542 / 24% / -37.50 dB
balance 0.00
Base Volume: 6554 / 10% / -60.00 dB
Monitor of Sink: n/a
Latency: 0 usec, configured 0 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC257 Analog"
alsa.id = "ALC257 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd3c0000 irq 77"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:06:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h/19h HD Audio Controller"
device.string = "front:1"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Family 17h/19h HD Audio Controller Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, availability unknown)
analog-input-mic: Microphone (type: Mic, priority: 8700, not available)
Active Port: analog-input-internal-mic
Formats:
pcm
Client #0
Driver: module-systemd-login.c
Owner Module: 16
Properties:
application.name = "Login Session 2"
systemd-login.session = "2"
Client #1
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "Mutter"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "2239"
application.process.user = "paulusasol"
application.process.host = "debian-lenovo-paul"
application.process.binary = "gnome-shell"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "07234901b0474c4aba8d248689125b8d"
Client #2
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "GNOME Shell Volume Control"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = "43.1"
application.process.id = "2239"
application.process.user = "paulusasol"
application.process.host = "debian-lenovo-paul"
application.process.binary = "gnome-shell"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "07234901b0474c4aba8d248689125b8d"
Client #3
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "GNOME Volume Control Media Keys"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.id = "org.gnome.VolumeControl"
application.icon_name = "multimedia-volume-control"
application.version = ""
application.process.id = "2557"
application.process.user = "paulusasol"
application.process.host = "debian-lenovo-paul"
application.process.binary = "gsd-media-keys"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "07234901b0474c4aba8d248689125b8d"
Client #6
Driver: protocol-native.c
Owner Module: 11
Properties:
application.name = "pactl"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "3826"
application.process.user = "paulusasol"
application.process.host = "debian-lenovo-paul"
application.process.binary = "pactl"
application.language = "C"
window.x11.display = ":0"
application.process.machine_id = "07234901b0474c4aba8d248689125b8d"
Sample #0
Name: bell-window-system
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Volume: (invalid)
balance 0.00
Duration: 0.1s
Size: 24.0 KiB
Lazy: no
Filename: n/a
Properties:
media.role = "event"
event.description = "Klangereignis"
event.id = "bell-window-system"
media.name = "bell-window-system"
media.filename = "/usr/share//sounds/freedesktop/stereo/bell.oga"
application.name = "Mutter"
native-protocol.peer = "UNIX socket client"
native-protocol.version = "35"
application.process.id = "2239"
application.process.user = "paulusasol"
application.process.host = "debian-lenovo-paul"
application.process.binary = "gnome-shell"
application.language = "de_DE.UTF-8"
window.x11.display = ":0"
application.process.machine_id = "07234901b0474c4aba8d248689125b8d"
Card #0
Name: alsa_card.pci-0000_06_00.1
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd3c8000 irq 76"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:06:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:06:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1637"
device.product.name = "Renoir Radeon High Definition Audio Controller"
device.string = "0"
device.description = "Renoir Radeon High Definition Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 5900, available: no)
output:hdmi-surround: Digital Surround 5.1 (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-surround71: Digital Surround 7.1 (HDMI)-Ausgabe (sinks: 1, sources: 0, priority: 800, available: no)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2)-Ausgabe (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2)-Ausgabe (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2)-Ausgabe (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3)-Ausgabe (sinks: 1, sources: 0, priority: 5700, available: no)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3)-Ausgabe (sinks: 1, sources: 0, priority: 600, available: no)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3)-Ausgabe (sinks: 1, sources: 0, priority: 600, available: no)
off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: off
Ports:
hdmi-output-0: HDMI / DisplayPort (type: HDMI, priority: 5900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo, output:hdmi-surround, output:hdmi-surround71
hdmi-output-1: HDMI / DisplayPort 2 (type: HDMI, priority: 5800, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra1, output:hdmi-surround-extra1, output:hdmi-surround71-extra1
hdmi-output-2: HDMI / DisplayPort 3 (type: HDMI, priority: 5700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo-extra2, output:hdmi-surround-extra2, output:hdmi-surround71-extra2
Card #1
Name: alsa_card.pci-0000_06_00.6
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfd3c0000 irq 77"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:06:00.6"
sysfs.path = "/devices/pci0000:00/0000:00:08.1/0000:06:00.6/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "15e3"
device.product.name = "Family 17h/19h HD Audio Controller"
device.string = "1"
device.description = "Family 17h/19h HD Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo-Eingabe (sinks: 0, sources: 1, priority: 32833, available: yes)
output:analog-stereo: Analog Stereo-Ausgabe (sinks: 1, sources: 0, priority: 39268, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 39333, available: yes)
off: Aus (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (type: Mic, priority: 8900, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-input-mic: Microphone (type: Mic, priority: 8700, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-speaker: Speakers (type: Speaker, priority: 10000, latency offset: 0 usec, availability unknown)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (type: Headphones, priority: 9900, latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
-------------- next part --------------
Server String: /run/user/1000/pulse/native
Library Protocol Version: 35
Server Protocol Version: 35
Is Local: yes
Client Index: 7
Tile Size: 65472
User Name: paulusasol
Host Name: debian-lenovo-paul
Server Name: pulseaudio
Server Version: 16.1
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_06_00.6.analog-stereo
Default Source: alsa_input.pci-0000_06_00.6.analog-stereo
Cookie: 04bf:2ede
More information about the pkg-pulseaudio-devel
mailing list