[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_32 #7881
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Sat Oct 15 02:54:32 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_armhf_32/7881/------------------------------------------
[...truncated 1774 lines...]
+Configurazione di libtimedate-perl (2.3000-2)...
+Configurazione di libsigsegv2:armhf (2.10-5)...
+Configurazione di groff-base (1.22.3-8)...
+Configurazione di gettext-base (0.19.8.1-1)...
+Configurazione di libpipeline1:armhf (1.4.1-2)...
+Configurazione di m4 (1.4.17-5)...
+Configurazione di libicu57:armhf (57.1-4)...
+Configurazione di libbsd0:armhf (0.8.3-1)...
+Configurazione di libxml2:armhf (2.9.4+dfsg1-2)...
+Configurazione di libmagic-mgc (1:5.28-4)...
+Configurazione di libmagic1:armhf (1:5.28-4)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Configurazione di autotools-dev (20160430.1)...
+Configurazione di libunistring0:armhf (0.9.6+really0.9.3-0.1)...
+Configurazione di libffi6:armhf (3.2.1-6)...
+Configurazione di bsdmainutils (9.0.11)...
+update-alternatives: viene usato /usr/bin/bsd-write per fornire /usr/bin/write (write) in modalità automatica
+update-alternatives: viene usato /usr/bin/bsd-from per fornire /usr/bin/from (from) in modalità automatica
+Configurazione di autopoint (0.19.8.1-1)...
+Configurazione di libfile-stripnondeterminism-perl (0.028-1)...
+Configurazione di libglib2.0-0:armhf (2.50.1-1)...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.28-4) ...
-Setting up libcroco3:armhf (0.6.11-2) ...
-Setting up automake (1:1.15-4) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-1) ...
+Configurazione di autoconf (2.69-10)...
+Configurazione di file (1:5.28-4)...
+Configurazione di libcroco3:armhf (0.6.11-2)...
+Configurazione di automake (1:1.15-4)...
+update-alternatives: viene usato /usr/bin/automake-1.15 per fornire /usr/bin/automake (automake) in modalità automatica
+Configurazione di man-db (2.7.5-1)...
Building database of manual pages ...
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.20) ...
-Setting up dh-autoreconf (12) ...
-Setting up debhelper (10.2.2) ...
-Setting up dh-strip-nondeterminism (0.028-1) ...
-Processing triggers for libc-bin (2.24-3) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Configurazione di libtool (2.4.6-2)...
+Configurazione di gettext (0.19.8.1-1)...
+Configurazione di intltool-debian (0.35.0+20060710.4)...
+Configurazione di po-debconf (1.0.20)...
+Configurazione di dh-autoreconf (12)...
+Configurazione di debhelper (10.2.2)...
+Configurazione di dh-strip-nondeterminism (0.028-1)...
+Elaborazione dei trigger per libc-bin (2.24-3)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
I: Copying source file
I: copying [libproc-queue-perl_1.23-1.dsc]
I: copying [./libproc-queue-perl_1.23.orig.tar.gz]
I: copying [./libproc-queue-perl_1.23-1.debian.tar.gz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Fri Jan 30 15:24:37 2015 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made sab 31 gen 2015 17:24:37 +14
gpgv: using RSA key 3D3A838837D0FA8D
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
dpkg-source: warning: failed to verify signature on ./libproc-queue-perl_1.23-1.dsc
dpkg-source: info: extracting libproc-queue-perl in libproc-queue-perl-1.23
dpkg-source: info: unpacking libproc-queue-perl_1.23.orig.tar.gz
dpkg-source: info: unpacking libproc-queue-perl_1.23-1.debian.tar.gz
I: Building the package
-I: Running cd /build-1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
+I: Running cd /build-2nd/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
dpkg-buildpackage: info: source package libproc-queue-perl
dpkg-buildpackage: info: source version 1.23-1
dpkg-buildpackage: info: source distribution unstable
@@ -266,24 +277,20 @@
perl -I. Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
-"\x{00f1}" does not map to ascii at /usr/share/perl/5.24/ExtUtils/MakeMaker.pm line 1185.
-"\x{00f1}" does not map to ascii at /usr/share/perl/5.24/ExtUtils/MakeMaker.pm line 1185.
-"\x{00f1}" does not map to ascii at /usr/share/perl/5.24/ExtUtils/MakeMaker.pm line 1185.
-"\x{00f1}" does not map to ascii at /usr/share/perl/5.24/ExtUtils/MakeMaker.pm line 1185.
Generating a Unix-style Makefile
Writing Makefile for Proc::Queue
Writing MYMETA.yml and MYMETA.json
dh_auto_build
dh_auto_build: Compatibility levels before 9 are deprecated (level 8 in use)
make -j1
-make[1]: Entering directory '/build-1st/libproc-queue-perl-1.23'
+make[1]: ingresso nella directory "/build-2nd/libproc-queue-perl-1.23"
cp lib/Proc/Queue.pm blib/lib/Proc/Queue.pm
Manifying 1 pod document
-make[1]: Leaving directory '/build-1st/libproc-queue-perl-1.23'
+make[1]: uscita dalla directory "/build-2nd/libproc-queue-perl-1.23"
dh_auto_test
dh_auto_test: Compatibility levels before 9 are deprecated (level 8 in use)
make -j1 test TEST_VERBOSE=1
-make[1]: Entering directory '/build-1st/libproc-queue-perl-1.23'
+make[1]: ingresso nella directory "/build-2nd/libproc-queue-perl-1.23"
PERL_DL_NONLAZY=1 PERL_USE_UNSAFE_INC=1 "/usr/bin/perl" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/pods.t .. skipped: Only the author needs to check that POD docs are right
t/run.t ...
@@ -300,9 +307,9 @@
ok 10
ok
All tests successful.
-Files=2, Tests=10, 23 wallclock secs ( 0.12 usr 0.01 sys + 1.07 cusr 2.69 csys = 3.89 CPU)
+Files=2, Tests=10, 22 wallclock secs ( 0.15 usr 0.03 sys + 0.57 cusr 0.33 csys = 1.08 CPU)
Result: PASS
-make[1]: Leaving directory '/build-1st/libproc-queue-perl-1.23'
+make[1]: uscita dalla directory "/build-2nd/libproc-queue-perl-1.23"
fakeroot debian/rules binary
dh binary
dh: Compatibility levels before 9 are deprecated (level 8 in use)
@@ -310,12 +317,12 @@
dh_prep
dh_auto_install
dh_auto_install: Compatibility levels before 9 are deprecated (level 8 in use)
- make -j1 install DESTDIR=/build-1st/libproc-queue-perl-1.23/debian/libproc-queue-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
-make[1]: Entering directory '/build-1st/libproc-queue-perl-1.23'
+ make -j1 install DESTDIR=/build-2nd/libproc-queue-perl-1.23/debian/libproc-queue-perl AM_UPDATE_INFO_DIR=no PREFIX=/usr
+make[1]: ingresso nella directory "/build-2nd/libproc-queue-perl-1.23"
Manifying 1 pod document
-Installing /build-1st/libproc-queue-perl-1.23/debian/libproc-queue-perl/usr/share/perl5/Proc/Queue.pm
-Installing /build-1st/libproc-queue-perl-1.23/debian/libproc-queue-perl/usr/share/man/man3/Proc::Queue.3pm
-make[1]: Leaving directory '/build-1st/libproc-queue-perl-1.23'
+Installing /build-2nd/libproc-queue-perl-1.23/debian/libproc-queue-perl/usr/share/perl5/Proc/Queue.pm
+Installing /build-2nd/libproc-queue-perl-1.23/debian/libproc-queue-perl/usr/share/man/man3/Proc::Queue.3pm
+make[1]: uscita dalla directory "/build-2nd/libproc-queue-perl-1.23"
dh_installdocs
dh_installdocs: Compatibility levels before 9 are deprecated (level 8 in use)
dh_installchangelogs
@@ -342,12 +349,14 @@
dpkg-source --after-build libproc-queue-perl-1.23
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/32241/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/32241/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/10523 and its subdirectories
-I: Current time: Fri Oct 14 14:51:12 GMT+12 2016
-I: pbuilder-time-stamp: 1476499872
+I: removing directory /srv/workspace/pbuilder/32241 and its subdirectories
+I: Current time: sab 15 ott 2016, 16.54.21, GMT-14
+I: pbuilder-time-stamp: 1476500061
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libproc-queue-perl_1.23-1.diff: 79.9% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libproc-queue-perl_1.23-1.diff.gz
b2/build.log: 76.7%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 76.3%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/libproc-queue-perl_1.23-1.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-97KgSZbi/tmp.zdqYL3O0Kv
+ mv /srv/reproducible-results/rbuild-debian-97KgSZbi/tmp.zdqYL3O0Kv /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libproc-queue-perl_1.23-1.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libproc-queue-perl_1.23-1.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ call_diffoscope_on_buildinfo_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-97KgSZbi
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-97KgSZbi/tmp.aN1yH0wD5e
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-97KgSZbi -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-97KgSZbi/dbd-tmp-uSG4Hvm
++ schroot --directory /srv/reproducible-results/rbuild-debian-97KgSZbi -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 61'
++ echo diffoscope 61
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 61 will be used to compare the two builds:'
+ _log I: 'diffoscope 61 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libproc-queue-perl_1.23-1.rbuild.log
++ date -u
+ echo -e 'Sat Oct 15 02:54:30 UTC 2016 I: diffoscope 61 will be used to compare the two builds:'
Sat Oct 15 02:54:30 UTC 2016 I: diffoscope 61 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-97KgSZbi -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-97KgSZbi/dbd-tmp-uSG4Hvm ; diffoscope --html /srv/reproducible-results/rbuild-debian-97KgSZbi/libproc-queue-perl_1.23-1.diffoscope.html --text /srv/reproducible-results/rbuild-debian-97KgSZbi/libproc-queue-perl_1.23-1.diffoscope.txt /srv/reproducible-results/rbuild-debian-97KgSZbi/b1/libproc-queue-perl_1.23-1_armhf.buildinfo /srv/reproducible-results/rbuild-debian-97KgSZbi/b2/libproc-queue-perl_1.23-1_armhf.buildinfo'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-97KgSZbi/tmp.aN1yH0wD5e
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _
| (_) |__ _ __ _ __ ___ ___ __ _ _ _ ___ _ _ ___ _ __
| | | '_ \| '_ \| '__/ _ \ / __|____ / _` | | | |/ _ \ | | |/ _ \_____| '_ \
| | | |_) | |_) | | | (_) | (_|_____| (_| | |_| | __/ |_| | __/_____| |_) |
|_|_|_.__/| .__/|_| \___/ \___| \__, |\__,_|\___|\__,_|\___| | .__/
|_| |_| |_|
_
___ _ __| |
/ _ \ '__| |
| __/ | | |
\___|_| |_|
Sat Oct 15 02:54:31 UTC 2016 I: diffoscope 61 found no differences in the changes files, and a .buildinfo file also exists.
Sat Oct 15 02:54:31 UTC 2016 I: libproc-queue-perl from unstable built successfully and reproducibly on armhf.
INFO: Starting at 2016-10-15 02:54:32.290140
INFO: Finished at 2016-10-15 02:54:32.444807, took: 0:00:00.154680
Sat Oct 15 02:54:32 UTC 2016 - successfully updated the database and updated https://tests.reproducible-builds.org/debian/rb-pkg/unstable/armhf/libproc-queue-perl.html
Sat Oct 15 02:54:32 UTC 2016 - total duration: 0h 5m 12s.
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libproc-queue-perl_1.23-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libproc-queue-perl_1.23-1.rbuild.log.gz: No space left on device
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libproc-queue-perl_1.23-1.rbuild.log:
gzip: /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libproc-queue-perl_1.23-1.rbuild.log.gz: No space left on device
Sat 15 Oct 02:54:32 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-guluV6jf, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list