[Qa-jenkins-scm] Build failed in Jenkins: reproducible_builder_armhf_47 #11085
jenkins at jenkins.debian.net
jenkins at jenkins.debian.net
Fri Dec 2 12:20:37 UTC 2016
https://jenkins.debian.net/job/reproducible_builder_armhf_47/11085/------------------------------------------
[...truncated 1833 lines...]
+Configurazione di groff-base (1.22.3-8)...
+Configurazione di gettext-base (0.19.8.1-1)...
+Configurazione di libpipeline1:armhf (1.4.1-2)...
+Configurazione di m4 (1.4.17-5)...
+Configurazione di libicu57:armhf (57.1-5)...
+Configurazione di libbsd0:armhf (0.8.3-1)...
+Configurazione di libxml2:armhf (2.9.4+dfsg1-2.1)...
+Configurazione di libmagic-mgc (1:5.29-1)...
+Configurazione di libmagic1:armhf (1:5.29-1)...
+Elaborazione dei trigger per libc-bin (2.24-7)...
+Configurazione di autotools-dev (20161112.1)...
+Configurazione di libunistring0:armhf (0.9.6+really0.9.3-0.1)...
+Configurazione di libffi6:armhf (3.2.1-6)...
+Configurazione di bsdmainutils (9.0.12)...
+update-alternatives: viene usato /usr/bin/bsd-write per fornire /usr/bin/write (write) in modalità automatica
+update-alternatives: viene usato /usr/bin/bsd-from per fornire /usr/bin/from (from) in modalità automatica
+Configurazione di libmodule-build-perl (0.422000-1)...
+Configurazione di autopoint (0.19.8.1-1)...
+Configurazione di libfile-stripnondeterminism-perl (0.028-1)...
+Configurazione di libglib2.0-0:armhf (2.50.2-2)...
No schema files found: doing nothing.
-Setting up autoconf (2.69-10) ...
-Setting up file (1:5.29-1) ...
-Setting up libcroco3:armhf (0.6.11-2) ...
-Setting up automake (1:1.15-5) ...
-update-alternatives: using /usr/bin/automake-1.15 to provide /usr/bin/automake (automake) in auto mode
-Setting up man-db (2.7.5-2) ...
+Configurazione di autoconf (2.69-10)...
+Configurazione di file (1:5.29-1)...
+Configurazione di libcroco3:armhf (0.6.11-2)...
+Configurazione di automake (1:1.15-5)...
+update-alternatives: viene usato /usr/bin/automake-1.15 per fornire /usr/bin/automake (automake) in modalità automatica
+Configurazione di man-db (2.7.5-2)...
Building database of manual pages ...
-Setting up libtool (2.4.6-2) ...
-Setting up gettext (0.19.8.1-1) ...
-Setting up intltool-debian (0.35.0+20060710.4) ...
-Setting up po-debconf (1.0.20) ...
-Setting up dh-autoreconf (12) ...
-Setting up debhelper (10.2.2) ...
-Setting up dh-strip-nondeterminism (0.028-1) ...
-Processing triggers for libc-bin (2.24-7) ...
-Reading package lists...
-Building dependency tree...
-Reading state information...
-Reading extended state information...
-Initializing package states...
-Writing extended state information...
-Building tag database...
+Configurazione di libtool (2.4.6-2)...
+Configurazione di gettext (0.19.8.1-1)...
+Configurazione di intltool-debian (0.35.0+20060710.4)...
+Configurazione di po-debconf (1.0.20)...
+Configurazione di dh-autoreconf (12)...
+Configurazione di debhelper (10.2.2)...
+Configurazione di dh-strip-nondeterminism (0.028-1)...
+Elaborazione dei trigger per libc-bin (2.24-7)...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
+Lettura delle informazioni sullo stato esteso...
+Inizializzazione dello stato dei pacchetti...
+Scrittura delle informazioni sullo stato esteso...
+Costruzione del database delle etichette...
-> Finished parsing the build-deps
-Reading package lists...
-Building dependency tree...
-Reading state information...
+Lettura elenco dei pacchetti...
+Generazione albero delle dipendenze...
+Lettura informazioni sullo stato...
fakeroot is already the newest version (1.21-2).
-0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
+0 aggiornati, 0 installati, 0 da rimuovere e 0 non aggiornati.
I: Copying source file
I: copying [libclass-autoloadcan-perl_0.03-2.dsc]
I: copying [./libclass-autoloadcan-perl_0.03.orig.tar.gz]
I: copying [./libclass-autoloadcan-perl_0.03-2.debian.tar.xz]
I: Extracting source
gpgv: unknown type of key resource 'trustedkeys.kbx'
-gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': General error
-gpgv: Signature made Mon Jun 8 07:38:04 2015 -12
+gpgv: keyblock resource '/root/.gnupg/trustedkeys.kbx': Errore generale
+gpgv: Signature made mar 09 giu 2015 09:38:04 +14
gpgv: using RSA key BB3A68018649AA06
-gpgv: Can't check signature: No public key
+gpgv: Can't check signature: Nessuna chiave pubblica
dpkg-source: warning: failed to verify signature on ./libclass-autoloadcan-perl_0.03-2.dsc
dpkg-source: info: extracting libclass-autoloadcan-perl in libclass-autoloadcan-perl-0.03
dpkg-source: info: unpacking libclass-autoloadcan-perl_0.03.orig.tar.gz
dpkg-source: info: unpacking libclass-autoloadcan-perl_0.03-2.debian.tar.xz
dpkg-source: info: applying pod-syntax.patch
I: Building the package
-I: Running cd /build/1st/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
+I: user script /srv/workspace/pbuilder/23032/tmp/hooks/A01_modfiy_src_dir starting
+I: user script /srv/workspace/pbuilder/23032/tmp/hooks/A01_modfiy_src_dir finished
+I: Running cd /build/libclass-autoloadcan-perl-0.03/*/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b --buildinfo-id=armhf -rfakeroot
dpkg-buildpackage: warning: --buildinfo-id is deprecated, it is without effect
dpkg-buildpackage: info: source package libclass-autoloadcan-perl
dpkg-buildpackage: info: source version 0.03-2
dpkg-buildpackage: info: source distribution unstable
dpkg-buildpackage: info: source changed by gregor herrmann <gregoa at debian.org>
- dpkg-source --before-build libclass-autoloadcan-perl-0.03
+ dpkg-source --before-build 2nd
dpkg-buildpackage: info: host architecture armhf
fakeroot debian/rules clean
dh clean
@@ -269,7 +283,7 @@
dh_testdir
dh_update_autotools_config
dh_auto_configure
- perl -I. Build.PL --installdirs vendor --config "optimize=-g -O2 -fdebug-prefix-map=/build/1st/libclass-autoloadcan-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build/1st/libclass-autoloadcan-perl-0.03=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro"
+ perl -I. Build.PL --installdirs vendor --config "optimize=-g -O2 -fdebug-prefix-map=/build/libclass-autoloadcan-perl-0.03/2nd=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=arm-linux-gnueabihf-gcc -g -O2 -fdebug-prefix-map=/build/libclass-autoloadcan-perl-0.03/2nd=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro"
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'Class-AutoloadCAN' version '0.03'
dh_auto_build
@@ -301,17 +315,17 @@
ok 20
ok
All tests successful.
-Files=1, Tests=20, 1 wallclock secs ( 0.13 usr 0.01 sys + 0.08 cusr 0.02 csys = 0.24 CPU)
+Files=1, Tests=20, 0 wallclock secs ( 0.07 usr 0.01 sys + 0.04 cusr 0.01 csys = 0.13 CPU)
Result: PASS
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_auto_install
- perl Build install --destdir /build/1st/libclass-autoloadcan-perl-0.03/debian/libclass-autoloadcan-perl --create_packlist 0
+ perl Build install --destdir /build/libclass-autoloadcan-perl-0.03/2nd/debian/libclass-autoloadcan-perl --create_packlist 0
Building Class-AutoloadCAN
-Installing /build/1st/libclass-autoloadcan-perl-0.03/debian/libclass-autoloadcan-perl/usr/share/perl5/Class/AutoloadCAN.pm
-Installing /build/1st/libclass-autoloadcan-perl-0.03/debian/libclass-autoloadcan-perl/usr/share/man/man3/Class::AutoloadCAN.3pm
+Installing /build/libclass-autoloadcan-perl-0.03/2nd/debian/libclass-autoloadcan-perl/usr/share/perl5/Class/AutoloadCAN.pm
+Installing /build/libclass-autoloadcan-perl-0.03/2nd/debian/libclass-autoloadcan-perl/usr/share/man/man3/Class::AutoloadCAN.3pm
dh_installdocs
dh_installchangelogs
dh_installman
@@ -330,15 +344,17 @@
dpkg-genbuildinfo: warning: File::FcntlLock not available; using flock which is not NFS-safe
dpkg-genchanges --build=binary >../libclass-autoloadcan-perl_0.03-2_armhf.changes
dpkg-genchanges: info: binary-only upload (no source code included)
- dpkg-source --after-build libclass-autoloadcan-perl-0.03
+ dpkg-source --after-build 2nd
dpkg-buildpackage: info: binary-only upload (no source included)
I: copying local configuration
+I: user script /srv/workspace/pbuilder/23032/tmp/hooks/B01_cleanup starting
+I: user script /srv/workspace/pbuilder/23032/tmp/hooks/B01_cleanup finished
I: unmounting /dev/shm filesystem
I: unmounting dev/pts filesystem
I: unmounting run/shm filesystem
I: unmounting proc filesystem
I: unmounting sys filesystem
I: cleaning the build env
-I: removing directory /srv/workspace/pbuilder/5146 and its subdirectories
-I: Current time: Fri Dec 2 00:10:21 -12 2016
-I: pbuilder-time-stamp: 1480680621
+I: removing directory /srv/workspace/pbuilder/23032 and its subdirectories
+I: Current time: sab 3 dic 2016, 02.14.20, +14
+I: pbuilder-time-stamp: 1480680860
Compressing the 2nd log...
/var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libclass-autoloadcan-perl_0.03-2.diff: 80.2% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/logdiffs/unstable/armhf/libclass-autoloadcan-perl_0.03-2.diff.gz
b2/build.log: 76.7%
+ echo 'Compressing the 1st log...'
Compressing the 1st log...
+ gzip -9cvn b1/build.log
b1/build.log: 76.0%
+ chmod 644 /var/lib/jenkins/userContent/reproducible/debian/logs/unstable/armhf/libclass-autoloadcan-perl_0.03-2.build1.log.gz
+ update_rbuildlog
+ chmod 644 /srv/reproducible-results/rbuild-debian-ajT4rZCl/tmp.NVCiOZEbSi
+ mv /srv/reproducible-results/rbuild-debian-ajT4rZCl/tmp.NVCiOZEbSi /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libclass-autoloadcan-perl_0.03-2.rbuild.log
+ RBUILDLOG=/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libclass-autoloadcan-perl_0.03-2.rbuild.log
+ '[' 0 -eq 1 ']'
+ '[' 0 -eq 0 ']'
+ filter_changes_files
+ sed -i -e '/^ [a-f0-9]\{32,64\} .*\.buildinfo$/d' b1/libclass-autoloadcan-perl_0.03-2_armhf.changes b2/libclass-autoloadcan-perl_0.03-2_armhf.changes
+ call_diffoscope_on_changes_files
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-ajT4rZCl
+ local TMPLOG=/srv/reproducible-results/rbuild-debian-ajT4rZCl/tmp.y3N6jQ9XxC
+ local TIMEOUT=120m
+ DBDSUITE=unstable
+ '[' unstable = experimental ']'
+ set -x
++ mktemp --tmpdir=/srv/reproducible-results/rbuild-debian-ajT4rZCl -d dbd-tmp-XXXXXXX
+ local TEMP=/srv/reproducible-results/rbuild-debian-ajT4rZCl/dbd-tmp-4ZIjWYT
++ schroot --directory /srv/reproducible-results/rbuild-debian-ajT4rZCl -c source:jenkins-reproducible-unstable-diffoscope diffoscope -- --version
+ DIFFOSCOPE='diffoscope 62'
++ echo diffoscope 62
++ grep '^E: 15binfmt: update-binfmts: unable to open'
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ log_info 'diffoscope 62 will be used to compare the two builds:'
+ _log I: 'diffoscope 62 will be used to compare the two builds:'
+ local prefix=I:
+ shift 1
+ tee -a /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libclass-autoloadcan-perl_0.03-2.rbuild.log
++ date -u
+ echo -e 'Fri Dec 2 12:14:29 UTC 2016 I: diffoscope 62 will be used to compare the two builds:'
Fri Dec 2 12:14:29 UTC 2016 I: diffoscope 62 will be used to compare the two builds:
+ set +e
+ set -x
+ timeout 120m nice schroot --directory /srv/reproducible-results/rbuild-debian-ajT4rZCl -c source:jenkins-reproducible-unstable-diffoscope -- sh -c 'export TMPDIR=/srv/reproducible-results/rbuild-debian-ajT4rZCl/dbd-tmp-4ZIjWYT ; diffoscope --html /srv/reproducible-results/rbuild-debian-ajT4rZCl/libclass-autoloadcan-perl_0.03-2.diffoscope.html --text /srv/reproducible-results/rbuild-debian-ajT4rZCl/libclass-autoloadcan-perl_0.03-2.diffoscope.txt /srv/reproducible-results/rbuild-debian-ajT4rZCl/b1/libclass-autoloadcan-perl_0.03-2_armhf.changes /srv/reproducible-results/rbuild-debian-ajT4rZCl/b2/libclass-autoloadcan-perl_0.03-2_armhf.changes'
+ RESULT=0
++ grep '^E: 15binfmt: update-binfmts: unable to open' /srv/reproducible-results/rbuild-debian-ajT4rZCl/tmp.y3N6jQ9XxC
++ true
+ LOG_RESULT=
+ '[' '!' -z '' ']'
+ false
+ set +x
_ _ _ _ _ _ _
| (_) |__ ___| | __ _ ___ ___ __ _ _ _| |_ ___ | | ___ __ _ __| |
| | | '_ \ / __| |/ _` / __/ __|_____ / _` | | | | __/ _ \| |/ _ \ / _` |/ _` |
| | | |_) | (__| | (_| \__ \__ \_____| (_| | |_| | || (_) | | (_) | (_| | (_| |
|_|_|_.__/ \___|_|\__,_|___/___/ \__,_|\__,_|\__\___/|_|\___/ \__,_|\__,_|
_
___ __ _ _ __ _ __ ___ _ __| |
/ __/ _` | '_ \ _____| '_ \ / _ \ '__| |
| (_| (_| | | | |_____| |_) | __/ | | |
\___\__,_|_| |_| | .__/ \___|_| |_|
|_|
Fri Dec 2 12:14:30 UTC 2016 I: diffoscope 62 found no differences in the changes files, and a .buildinfo file also exists.
Fri Dec 2 12:14:30 UTC 2016 I: libclass-autoloadcan-perl from unstable built successfully and reproducibly on armhf.
Error: database is locked
Error: database is locked
Error: database is locked
Error: database is locked
/var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libclass-autoloadcan-perl_0.03-2.rbuild.log: 71.3% -- replaced with /var/lib/jenkins/userContent/reproducible/debian/rbuild/unstable/armhf/libclass-autoloadcan-perl_0.03-2.rbuild.log.gz
INFO: Starting at 2016-12-02 12:19:36.478175
CRITICAL: SQLite database locked, could not execute query:
CRITICAL: "SELECT r.status, r.version, r.build_date
CRITICAL: FROM results AS r JOIN sources AS s
CRITICAL: ON r.package_id=s.id WHERE s.name='libclass-autoloadcan-perl'
CRITICAL: AND s.architecture='amd64' AND s.suite='testing'"
CRITICAL: Exiting script.
INFO: Finished at 2016-12-02 12:20:36.807824, took: 0:01:00.329670
Warning: cannot update html pages for libclass-autoloadcan-perl
Fri 2 Dec 12:20:36 UTC 2016 - /srv/jenkins/bin/reproducible_build.sh stopped running as /tmp/jenkins-script-5gUdFW2n, which will now be removed.
Build step 'Execute shell' marked build as failure
More information about the Qa-jenkins-scm
mailing list