[sane-devel] Canon imageCLASS MF416dw & Ubuntu 18.04

[Rolf Bensch]

Hi,

You need to install SANE's development version, e.g. from my PPA:
https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git .

The MF410 Series is supported since PIXMA backend version 0.17.51 (SANE
version 1.0.27), but still has status 'untested'.

Hope this helps.

Cheers,
Rolf


Am 18.01.19 um 22:53 schrieb Louis Lagendijk:
> On Sat, 2019-01-05 at 11:18 -0800, John Oliver wrote:
>> On Tue, Jan 01, 2019 at 10:43:03AM -0800, John Oliver wrote:
>>> I'm trying to get this scanner working, and am having zero luck.
>>> According to the supported scanners page, I should be using the
>>> PIXMA
>>> backend, but that requires BJNP, and an nmap says that port is not
>>> open,
>>> and suggests I should be using MFNP, but PIXMA says you *must* use
>>> BJNP,
>>> so...
>>>
>>> joliver at blinky:~$ !610
>>> sudo nmap -sU -p 8610-8612 192.168.0.20
>>>
>>> Starting Nmap 7.60 ( https://nmap.org ) at 2019-01-01 11:39 MST
>>> Nmap scan report for 192.168.0.20
>>> Host is up (0.050s latency).
>>>
>>> PORT     STATE         SERVICE
>>> 8610/udp open|filtered canon-mfnp
>>> 8611/udp closed        canon-bjnp1
>>> 8612/udp closed        canon-bjnp2
>>> MAC Address: 80:A5:89:BD:C7:39 (AzureWave Technology)
>>>
>>> Nmap done: 1 IP address (1 host up) scanned in 2.01 seconds
>>
>> I've attached a small dump showing that there is communication
>> happening, but the scanner still isn't seen / recognized.
>>
> My apologies for the late response. The traces look ok. Looking at the
> source code, I guess that the MF416 is not yet supported. @Rolf Bensch,
> could you please have a look if you can add the MF416?
> 
> BR, Louis
> 
>