<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2719.2200" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2><FONT size=2>
<P>Hallo</P>
<P>I ask help for a Scanner Canon N656U on USB door kindly. I have discharged
the driver from Healthy, the release 1.0.9 and plustek 0_44_10.</P>
<P>The system is a Red Hat 8.0.</P>
<P>I have compiled first healthy sane-backends in /sr/ local/ src: #./configure,
#make, #make install.</P>
<P>I have copied the plustek 0_44_10 and untarred in sane-backends.</P>
<P>I have commanded: #make all, # make install, #make load. </P>
<P>I have had the following result the command #make load:</P>
<P>/s bin mod probe pt_drv] "exit1</P>
<P>/lib/modules/ 2.4.18-14/misc/pt_drv.o: init module: Success</P>
<P>Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.</P>
<P>You may find more information in sys log or the output for dmesg.</P>
<P>/lib/modules/2.4.18-14/misc/ pt_drv.o: insmod /lib/modules/
2.4.18-14/misc/pt_drv.o failed</P>
<P>/lib/modules/ 2.4.18-14/misc/pt_drv.o:insmod pt_drv failed</P>
<P>make: ***[load] Error 1</P>
<P>I have inducted sane-frontends always in /usr/local/src: #./configure, #make,
#make install.</P>
<P>I have tried the command: #sane-find-scanner has had the response:</P>
<P>find USB scanner (vendor= 0x04a9 [Canon] product= 0x2206 [CanonScan] ) at
/dev/usb/ scanner0 find USB scanner (vendor= 0x04a9 [Canon] product= 0x2206
[CanonScan] ) at libusb: 001: 003</P>
<P>USB device was detected. This program can't be sure if it's really a scanner.
If it is your scanner, it may or may not be supported by SANE. Try scanimage -L
and read the backend's manpage.</P>
<P># scanimage -L:</P>
<P>No scanner were identified. If you were especting something different, check
that the scanner is plugged in, turned ou mod detected by the sane-find-scanner
toll (if appropriate). Please read the documentation whitch come whit this
software /README, FAQ, manpage).</P>
<P>bin# rmmod scanner modprobe scanner vendor= 0x04a9 product= 0x2206</P>
<P>Response:</P>
<P>rmmod: module scanner is not loaded</P>
<P>rmmod: module modprobe is not loaed</P>
<P>rmmod: module scanner is not loaded</P>
<P>rmmod: module vendor= 0x04a9 is not loaded</P>
<P>rmmod: module product= 0x2206</P>
<P>I have tried to alter the line plustek.conf with Emacs inserting the vendor
and product of the Canon scanner but.</P>
<P>I have not had no result.</P>
<P>#dmesg</P>
<P>usb.c: registered new driver usbdevfs</P>
<P>usb.c: registered new driver hub</P>
<P>usb-ohci.c: USB OHCI at number 0xcc 849000, IRQ 3</P>
<P>usb-ohci.c: usb-00: 01.2, Silicon Integrated System (SIS) 7001</P>
<P>usb.c: news USB bus registered, assigned bus number 1</P>
<P>usb.c: USB hub found</P>
<P>usb.c: 2 ports detected</P>
<P>usb.c: registered new driver hiddeev</P>
<P>usb.c: registered new driver hid</P>
<P>hid-core.c: v 1.8.1 Andreas Gal, vojtec Pavlich</P>
<P>hid-core.c: USB HID support drivers</P>
<P>hub.c: USB new device connect an bus 1/2, assigned device number 2</P>
<P>usb.c: USB device 2 /vend/prod 0x4a9/0x2206) is not climed by any active
driver</P>
<P>pt_drv: driver version o.44_11</P>
<P>pt_drv: no device (s) detected, (-9020)</P>
<P>pt_drv: driver version o.44_11</P>
<P>pt_drv: no device (s) detected, (-9020)</P>
<P>In /proc/bus/usb/devices the scanner has seen evenly.</P>
<P>I have removed the # in the line dll.conf in front of the lines for Canon
scanner, but it has not changed nothing. </P>
<P>Could anybody help me?</P>
<P>Thank you Maurizio</P></FONT></FONT></DIV></BODY></HTML>