<div dir="ltr"><div dir="auto">Hello,<div dir="auto"><br></div><div dir="auto">I contact this list to ask if someone can help with the  installation of Sane for the Epson XP-630 on FreeBSD 11.1, for access over the network. <br></div><div dir="auto"><br></div><div dir="auto"> I installed the  following packages :<br></div><div>    sane-backends-1.0.27_1<br></div><div>    xsane-0999_6<br><br></div><div>I use the backend epson2, in which I added the network address of the XP-630 with the net option. The command scanimage -L recognizes the scanner as Epson PID 110C flatbed scanner. <br></div><div>So far, so good.<br><br>When I start the scan with  xsane, the printer says to be scanning, bu after a few  get the error 'Failed to start scanner, Error during device I/O' in xsane. Sometimes, the printer continues to say 'Scanning', but mostly I get the message 'Turn the power on and off again'. <br><br></div><div>Am I using the wrong backend here, should I install iscan or.... I do not find a clear answer on the internet, and what stops me from trying iscan is that there seems to be no version for freeBSD. <br><br></div><div>Can anybody help?<br><br></div><div>Thanks,<br></div><div><br></div><div>Edwin Ancaer<br></div></div></div>