<div dir="ltr">Hello,<div><br></div><div>I am doing microscopic focus stacking with mirrorless cameras. I have a Cognisys Stackshot rail that I am doing this with, but I also have a bunch of Canon 9000F & 8800F scanners, so I am wondering whether I could use the precision these devices have to move a camera forward by small increments.</div><div><br></div><div>I have already been experimenting with attaching a stepper motor to a microscope, controlled by a Big Easy Driver and a Raspberry Pi. This person used a scanner for focus stacking by connecting a scanner motor to an external driver:</div><div><br></div><div><a href="https://petapixel.com/2013/01/24/focus-stacking-macro-photographs-with-a-hacked-flatbed-scanner/">https://petapixel.com/2013/01/24/focus-stacking-macro-photographs-with-a-hacked-flatbed-scanner/</a><br></div><div><br></div><div>This would work for me, but would it be possible to manually move the scanner imaging head with SANE and the scanner's firmware and circuitry? Basically, I would need SANE to move the scanner imaging head forward by a tiny increment, pause for a few seconds for the camera to take a photo, move forward again and so on. I just need total control of where the scanner imaging head is moved to and how small the increments are. My goal is to use this rig to do timelapse microscopic focus stacked images of plant growth.<br></div><div><br></div><div>Ideally, the scanner imaging head light would be turned off too but I could also use tape or disconnect the LED array. I have other scanner models as well if the firmware or drivers of these Canon scanners isn't suitable.</div><div><br></div><div>Any ideas would be appreciated, thanks!</div><div><br></div><div>Joel<br></div></div>