[3dprinter-general] Bug#925664: cura-engine: ftbfs with GCC-9
Matthias Klose
doko at debian.org
Wed Mar 27 19:44:40 GMT 2019
Package: src:cura-engine
Version: 1:3.3.0-2.1
Severity: normal
Tags: sid bullseye
User: debian-gcc at lists.debian.org
Usertags: ftbfs-gcc-9
Please keep this issue open in the bug tracker for the package it
was filed for. If a fix in another package is required, please
file a bug for the other package (or clone), and add a block in this
package. Please keep the issue open until the package can be built in
a follow-up test rebuild.
The package fails to build in a test rebuild on at least amd64 with
gcc-9/g++-9, but succeeds to build with gcc-8/g++-8. The
severity of this report will be raised before the bullseye release,
so nothing has to be done for the buster release.
The full build log can be found at:
http://people.debian.org/~doko/logs/gcc9-20190321/cura-engine_3.3.0-2.1_unstable_gcc9.log
The last lines of the build log are at the end of this report.
To build with GCC 9, either set CC=gcc-9 CXX=g++-9 explicitly,
or install the gcc, g++, gfortran, ... packages from experimental.
apt-get -t=experimental install g++
Common build failures are new warnings resulting in build failures with
-Werror turned on, or new/dropped symbols in Debian symbols files.
For other C/C++ related build failures see the porting guide at
http://gcc.gnu.org/gcc-9/porting_to.html
GCC 9 also passes the linker option --as-needed by default; typical
build issues are passing libraries before object files to the linker,
or underlinking of convenience libraries built from the same source.
[...]
been installed.
-- Configuring done
-- Generating done
CMake Warning:
Manually-specified variables were not used by the project:
CMAKE_EXPORT_NO_PACKAGE_REGISTRY
-- Build files have been written to: /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu
make[1]: Leaving directory '/<<PKGBUILDDIR>>'
dh_auto_build -a -O--buildsystem=cmake
cd obj-x86_64-linux-gnu && make -j4
make[1]: Entering directory '/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu'
/usr/bin/cmake -S/<<PKGBUILDDIR>> -B/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu --check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/CMakeFiles /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/CMakeFiles/progress.marks
make -f CMakeFiles/Makefile2 all
make[2]: Entering directory '/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu'
make -f CMakeFiles/_CuraEngine.dir/build.make CMakeFiles/_CuraEngine.dir/depend
make[3]: Entering directory '/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu'
[ 1%] Running cpp protocol buffer compiler on Cura.proto
/usr/bin/protoc --cpp_out /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -I /<<PKGBUILDDIR>> /<<PKGBUILDDIR>>/Cura.proto
cd /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /<<PKGBUILDDIR>> /<<PKGBUILDDIR>> /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu /<<PKGBUILDDIR>>/obj-x86_64-linux-gnu/CMakeFiles/_CuraEngine.dir/DependInfo.cmake --color=
Scanning dependencies of target _CuraEngine
make[3]: Leaving directory '/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu'
make -f CMakeFiles/_CuraEngine.dir/build.make CMakeFiles/_CuraEngine.dir/build
make[3]: Entering directory '/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu'
[ 3%] Building CXX object CMakeFiles/_CuraEngine.dir/src/bridge.cpp.o
[ 3%] Building CXX object CMakeFiles/_CuraEngine.dir/src/ConicalOverhang.cpp.o
[ 4%] Building CXX object CMakeFiles/_CuraEngine.dir/src/commandSocket.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/ConicalOverhang.cpp.o -c /<<PKGBUILDDIR>>/src/ConicalOverhang.cpp
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/bridge.cpp.o -c /<<PKGBUILDDIR>>/src/bridge.cpp
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/commandSocket.cpp.o -c /<<PKGBUILDDIR>>/src/commandSocket.cpp
[ 5%] Building CXX object CMakeFiles/_CuraEngine.dir/src/ExtruderTrain.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/ExtruderTrain.cpp.o -c /<<PKGBUILDDIR>>/src/ExtruderTrain.cpp
[ 6%] Building CXX object CMakeFiles/_CuraEngine.dir/src/FffGcodeWriter.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/FffGcodeWriter.cpp.o -c /<<PKGBUILDDIR>>/src/FffGcodeWriter.cpp
[ 7%] Building CXX object CMakeFiles/_CuraEngine.dir/src/FffPolygonGenerator.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/FffPolygonGenerator.cpp.o -c /<<PKGBUILDDIR>>/src/FffPolygonGenerator.cpp
[ 8%] Building CXX object CMakeFiles/_CuraEngine.dir/src/FffProcessor.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/FffProcessor.cpp.o -c /<<PKGBUILDDIR>>/src/FffProcessor.cpp
[ 9%] Building CXX object CMakeFiles/_CuraEngine.dir/src/gcodeExport.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/gcodeExport.cpp.o -c /<<PKGBUILDDIR>>/src/gcodeExport.cpp
[ 10%] Building CXX object CMakeFiles/_CuraEngine.dir/src/GCodePathConfig.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/GCodePathConfig.cpp.o -c /<<PKGBUILDDIR>>/src/GCodePathConfig.cpp
[ 11%] Building CXX object CMakeFiles/_CuraEngine.dir/src/infill.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/infill.cpp.o -c /<<PKGBUILDDIR>>/src/infill.cpp
[ 12%] Building CXX object CMakeFiles/_CuraEngine.dir/src/InsetOrderOptimizer.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/InsetOrderOptimizer.cpp.o -c /<<PKGBUILDDIR>>/src/InsetOrderOptimizer.cpp
[ 13%] Building CXX object CMakeFiles/_CuraEngine.dir/src/layerPart.cpp.o
/usr/bin/c++ -DARCUS -DVERSION=\"3.3.0\" -I/usr/include/polyclipping -I/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu -g -O2 -fdebug-prefix-map=/<<PKGBUILDDIR>>=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -O3 -DNDEBUG -Wall -static-libstdc++ -fopenmp -std=gnu++11 -o CMakeFiles/_CuraEngine.dir/src/layerPart.cpp.o -c /<<PKGBUILDDIR>>/src/layerPart.cpp
/<<PKGBUILDDIR>>/src/layerPart.cpp: In function 'void cura::createLayerParts(cura::SliceMeshStorage&, cura::Slicer*, bool, bool)':
/<<PKGBUILDDIR>>/src/layerPart.cpp:50:46: error: 'total_layers' not specified in enclosing 'parallel'
50 | for (unsigned int layer_nr = 0; layer_nr < total_layers; layer_nr++)
| ~~~~~~~~~^~~~~~~~~~~~~~
/<<PKGBUILDDIR>>/src/layerPart.cpp:49:9: error: enclosing 'parallel'
49 | #pragma omp parallel for default(none) shared(mesh,slicer) firstprivate(union_layers,union_all_remove_holes) schedule(dynamic)
| ^~~
make[3]: *** [CMakeFiles/_CuraEngine.dir/build.make:217: CMakeFiles/_CuraEngine.dir/src/layerPart.cpp.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu'
make[2]: *** [CMakeFiles/Makefile2:113: CMakeFiles/_CuraEngine.dir/all] Error 2
make[2]: Leaving directory '/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu'
make[1]: *** [Makefile:166: all] Error 2
make[1]: Leaving directory '/<<PKGBUILDDIR>>/obj-x86_64-linux-gnu'
dh_auto_build: cd obj-x86_64-linux-gnu && make -j4 returned exit code 2
make: *** [debian/rules:9: build-arch] Error 2
dpkg-buildpackage: error: debian/rules build-arch subprocess returned exit status 2
More information about the 3dprinter-general
mailing list