[PATCH] [package] babeld: update to 0.98, fix scripts
Gabriel Kerneis
kerneis at pps.jussieu.fr
Mon Feb 15 18:21:39 UTC 2010
- Full-featured UCI configuration file (no need for babeld.conf).
- Do not check the pid file (useless) and ahcpd script (harmful).
- 8 February 2010: babeld 0.98:
* Implement the ability to prefer Babel routes to external routes
according to the kernel priority (-A).
* Implement the ability to redistribute "boot" routes when the
protocol is explicitly specified on the "redistribute" line.
* Allow trailing whitespace in config file.
Signed-off-by: Gabriel Kerneis <kerneis at pps.jussieu.fr>
---
net/babel/Makefile | 4 +-
net/babel/files/babeld.conf | 20 +++++-
net/babel/files/babeld.config | 71 +++++++++++++++++++++-
net/babel/files/babeld.init | 131 ++++++++++++++++++++++++++++++++++-------
4 files changed, 197 insertions(+), 29 deletions(-)
diff --git a/net/babel/Makefile b/net/babel/Makefile
index 144bf9e..763e32d 100644
--- a/net/babel/Makefile
+++ b/net/babel/Makefile
@@ -8,12 +8,12 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=babeld
-PKG_VERSION:=0.97
+PKG_VERSION:=0.98
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=http://www.pps.jussieu.fr/~jch/software/files/
-PKG_MD5SUM:=be0748c382dfe60bd35aa6b661e6077d
+PKG_MD5SUM:=85af76e90914b82d9ece497e15df252f
include $(INCLUDE_DIR)/package.mk
diff --git a/net/babel/files/babeld.conf b/net/babel/files/babeld.conf
index 07fcbe1..fd488f9 100644
--- a/net/babel/files/babeld.conf
+++ b/net/babel/files/babeld.conf
@@ -1,11 +1,15 @@
# babel config file
-# Copyright (C) 2008 Juliusz Chroboczek, L. Aaron Kaplan
+# Copyright (C) 2008-2010 Juliusz Chroboczek, L. Aaron Kaplan
# <jch at pps.jussieu.fr> , <aaron at lo-res.org>
#
# This config file simply documents sample entries.
-# "redistribute" means: redistribute routes from other
-# routing protocols into babel. "local" means addresses assigned to local interfaces.
+# "redistribute" means: redistribute routes from other routing protocols
+# into babel. "local" means addresses assigned to local interfaces.
#
+# You do not need to edit this file: you can use /etc/config/babeld
+# instead (sections "interface" and "filter"). Both files can be used
+# simultaneously (the rules of this file are executed first).
+
# the default rules are:
#
## redistribute local
@@ -14,15 +18,23 @@
# this says, redistribute local addresses but no other routes
-
# redistribute IPv4 default route into babel
## redistribute local ip 0.0.0.0/0 le 0 metric 128
# same but for IPv6
## redistribute local ip ::/0 le 0 metric 128
+
# don't redistribute all local addresses, only selected ones
# after the first line, the "deny" rules kicks in. After the "deny"
# no redistribute local rules are going to match
## redistribute local ip 192.160.4.0/24
## redistribute local deny
+
+
+# Babel refuses to redistribute routes with a protocol number of "boot";
+# this is standard practice, and means that you cannot easily
+# redistribute the default route installed by dhcp. It is however
+# possible to redistribute such route by explicitly specifying "proto 3"
+# on the redistribute line.
+## redistribute ip 0.0.0.0/0 le 0 proto 3 metric 128
diff --git a/net/babel/files/babeld.config b/net/babel/files/babeld.config
index 3b0fb38..ab6a639 100644
--- a/net/babel/files/babeld.config
+++ b/net/babel/files/babeld.config
@@ -1,2 +1,69 @@
-config babeld
- #list 'interface' 'wlan'
+config general
+ option 'multicast_address' 'ff02::cca6:c0f9:e182:5373'
+ option 'port' '8475'
+ option 'state_file' '/var/lib/babel-state'
+ option 'hello_interval' '4'
+ option 'wired_hello_interval' '20'
+ # Enable detection of idle networks. This functonality is
+ # experimental, don't use it unless you know what you are doing.
+ ## option 'idle_hello_interval' '0'
+ option 'kernel_priority' '0'
+ # Do not use this option unless you know what you are doing, as it can
+ # cause persistent route flapping.
+ ## option 'duplication_priority' '0'
+ option 'carrier_sense' 'false'
+ option 'assume_wireless' 'false'
+ option 'no_split_horizon' 'false'
+ option 'parasitic' 'false'
+ option 'debug' '0'
+ # Listen for connections from a front-end, e.g. on port 33123.
+ ## option 'local_server' '33123'
+ # Use the given kernel routing table for routes inserted by babeld.
+ ## option 'export_table' '0'
+ # Export routes from the given kernel routing table.
+ ## option 'import_table' '0'
+ # The configuration file is not necessary since you can do everything
+ # from this file.
+ option 'conffile' '/etc/babeld.conf'
+ option 'logfile' '/var/log/babeld.log'
+ option 'pidfile' '/var/run/babeld.pid'
+
+# You can use aliases (like lan, wlan) or real names (like eth0.0).
+# If you use an alias, it must be already defined when babeld starts.
+# Otherwise, the name is taken literally and the interface can be
+# brought up later (useful for tunnels for instance).
+config interface wlan
+ # Change this line to enable babeld on this interface
+ option 'enable' 'false'
+ option 'wired' 'auto'
+ option 'link_quality' 'auto'
+ option 'split_horizon' 'auto'
+ # The default is 96 for wired interfaces, and 256 for wireless ones
+ ## option 'rxcost' '256'
+ # The default is specified with the -h and -H command-line flags.
+ ## option 'hello_interval' '4'
+ # This can be set to a fairly large value, unless significant
+ # packet loss is expected. The default is four times the hello
+ # interval.
+ ## option 'update_interval' '16'
+
+config interface lan
+ option 'enable' 'false'
+
+# A filter consists in a type ('in', 'out' or 'redistribute'), an action
+# ('allow', 'deny' or 'metric xxx') and a set of selectors ('ip', 'eq',
+# etc.). See /etc/babeld.conf for more details.
+# Here is a sample filter wich redistributes the default route if its
+# protocol number is "boot", e.g. when it installed by dhcp. It is
+# disabled by default.
+config filter
+ option 'enable' 'false'
+ # Type
+ option 'type' 'redistribute'
+ # Selectors: ip, eq, le, ge, neigh, id, proto, local, if
+ option 'ip' '0.0.0.0/0'
+ option 'le' '0'
+ option 'proto' '3'
+ # Action
+ option 'action' 'metric 128'
+
diff --git a/net/babel/files/babeld.init b/net/babel/files/babeld.init
index a7e4587..3bba6cc 100755
--- a/net/babel/files/babeld.init
+++ b/net/babel/files/babeld.init
@@ -2,37 +2,126 @@
START=70
+listen_ifname() {
+ local name="$1"
+ local switch="$2"
+ local _uciname=`uci get -q -P /var/state network.$name.ifname`
+ append args "$switch ${_uciname:-$name}"
+ append interfaces "${_uciname:-$name}"
+}
+
+append_ifname() {
+ local section="$1"
+ local option="$2"
+ local switch="$3"
+ local _name
+ config_get _name "$section" "$option"
+ [ -z "$name" ] && return 0
+ local _uciname=`uci get -q -P /var/state network.$_name.ifname`
+ append args "$switch ${_uciname:-$_name}"
+}
+
+append_bool() {
+ local section="$1"
+ local option="$2"
+ local value="$3"
+ local _loctmp
+ config_get_bool _loctmp "$section" "$option"
+ [ "$_loctmp" -gt 0 ] && append args "$value"
+}
+
+append_parm() {
+ local section="$1"
+ local option="$2"
+ local switch="$3"
+ local _loctmp
+ config_get _loctmp "$section" "$option"
+ [ -z "$_loctmp" ] && return 0
+ append args "$switch $_loctmp"
+}
+
+babel_filter() {
+ local cfg="$1"
+ local _loctmp
+
+ local _enabled
+ config_get_bool _enabled "$cfg" 'enable' 1
+ [ "$_enabled" -eq 0 ] && return 0
+
+ append args "-C '"
+
+ append_parm "$cfg" 'type' ''
+
+ append_parm "$cfg" 'ip' 'ip'
+ append_parm "$cfg" 'le' 'le'
+ append_parm "$cfg" 'ge' 'ge'
+ append_parm "$cfg" 'neigh' 'neigh'
+ append_parm "$cfg" 'id' 'id'
+ append_parm "$cfg" 'proto' 'proto'
+
+ append_ifname "$cfg" 'if' 'if'
+
+ append_bool "$cfg" 'local' 'local'
+
+ append args ' ' "'"
+}
+
babel_addif() {
- config_get ifname $1 ifname
- append interfaces "$ifname"
+ local cfg="$1"
+
+ local _enabled
+ config_get_bool _enabled "$cfg" 'enable' 1
+ [ "$_enabled" -eq 0 ] && return 0
+
+ listen_ifname "$cfg" "-C 'interface"
+
+ append_parm "$cfg" 'wired' 'wired'
+ append_parm "$cfg" 'link_quality' 'link-quality'
+ append_parm "$cfg" 'split_horizon' 'split-horizon'
+ append_parm "$cfg" 'rxcost' 'rxcost'
+ append_parm "$cfg" 'hello_interval' 'hello-interval'
+ append_parm "$cfg" 'update_interval' 'update-interval'
+
+ append args ' ' "'"
}
babel_config() {
local cfg="$1"
- interfaces=
- config_list_foreach "$cfg" interface babel_addif
- pidfile=/var/run/babeld-"$cfg".pid
- [ -z "$interfaces" ] && return 0
- if [ -e $pidfile ] ; then
- echo "$pidfile exists -- not starting babel." >&2
- else
- /usr/sbin/babeld -D -I $pidfile $interfaces
- fi
+
+ append_bool "$cfg" 'carrier_sense' '-l'
+ append_bool "$cfg" 'assume_wireless' '-w'
+ append_bool "$cfg" 'no_split_horizon' '-s'
+ append_bool "$cfg" 'parasitic' '-P'
+
+ append_parm "$cfg" 'multicast_address' '-m'
+ append_parm "$cfg" 'port' '-p'
+ append_parm "$cfg" 'state_file' '-S'
+ append_parm "$cfg" 'hello_interval' '-h'
+ append_parm "$cfg" 'wired_hello_interval' '-H'
+ append_parm "$cfg" 'idle_hello_interval' '-i'
+ append_parm "$cfg" 'kernel_priority' '-k'
+ append_parm "$cfg" 'duplication_priority' '-A'
+ append_parm "$cfg" 'debug' '-d'
+ append_parm "$cfg" 'local_server' '-g'
+ append_parm "$cfg" 'export_table' '-t'
+ append_parm "$cfg" 'import_table' '-T'
+ append_parm "$cfg" 'conffile' '-c'
+ append_parm "$cfg" 'logfile' '-L'
+ append_parm "$cfg" 'pidfile' '-I'
}
start() {
- if [ -x /etc/init.d/ahcpd ] && /etc/init.d/ahcpd enabled; then
- echo 'Not starting babel -- will be started by ahcpd.'
- exit 0
- fi
- include /lib/network
- scan_interfaces
- config_load babeld
mkdir -p /var/lib
- config_foreach babel_config babeld
+ config_load babeld
+ unset args
+ unset interfaces
+ config_foreach babel_config general
+ config_foreach babel_addif interface
+ config_foreach babel_filter filter
+ [ -z "$interfaces" ] && return 0
+ eval "/usr/sbin/babeld -D $args $interfaces"
}
stop() {
- kill $(cat /var/run/babeld-*.pid)
- rm -f /var/run/babeld-*.pid
+ killall babeld
}
--
1.6.6
--K8nIJk4ghYZn606h--
More information about the Babel-users
mailing list