[Babel-users] How to setup Babel in a simple linear topology

mason myongsu.choe at gmail.com
Sat Oct 23 07:05:01 UTC 2010

I would like to know that manet protocols based on layer-3 such babel (olsr
or batmand) seem to be properly working with the nodes established with
babel.  On the other hand,  the nodes such as PC or IP Camera not capable of
supporting babel within the network can not be joined to the network? In
general, layer-2 based mesh network has no issue about this one but it has
some limitations such as scalability and delay of route changes due to the
use of STP.

Any comments are very appreciated...

On Thu, Oct 21, 2010 at 10:35 AM, mason <myongsu.choe at gmail.com> wrote:

> Although I flushed all of the tables in a firewall as you recommended, but
> it still produces the same results, blocking.
> FYI, I only imposed "route redistribute" setting only at node
> like
> redistribute ip le 0 metric 128.
> -
> mason
> On Thu, Oct 21, 2010 at 12:52 AM, Juliusz Chroboczek <
> Juliusz.Chroboczek at pps.jussieu.fr> wrote:
>> > In addition, at Node2, I can get the following routing table.
>> Especially,
>> > routing table flag of or 1010.1.123 has to be U not UGH. Is
>> it
>> > something wrong?
>> No, that's fine.
>> Please disable all the firewalls on all of your nodes, and try again.
>>  iptables -F INPUT
>>  iptables -F OUTPUT
>>  iptables -F FORWARD
>>                                        Juliusz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/babel-users/attachments/20101023/e05dbca8/attachment.htm>

More information about the Babel-users mailing list