[Babel-users] Mesh Network

[Outback Dingo]

On Tue, Mar 24, 2015 at 7:12 PM, Sahana k.srinivas <sahana19793 at gmail.com>
wrote:

> Hi,
>
> Sorry there was a mistake in the previous mail. So here is the corrected
> version.
> I am having trouble setting up client to client communication in a
> wireless network.
> Consider I have three routers R1, R2, R3. Each of them are configured with
> an ad-hoc network and an access point respectively. The wireless interface
> is divided into two modes, one running ad-hoc mode (wlan0) and other access
> point (wlan0-1). The ssid of the of the ad-hoc network of all the routers
> is "mesh" (ip 192.168.1.x) and that of the access points is C0, C1, C2
> (192.168.2.x) of routers R1, R2, R3respectively. The router is running
> BABEL on wireless interface (wlan0). So when a client, say laptop
> connects to the access point C0 of R1 and another laptop connects to C2 of
> R3, then can C0 and C2 communicate with each other at 2 hops? if so how?
>
> Thanks in advance :)
>
>
first see my previous email, then, you could also potentially install babel
on the client nodes if unix :) but shouldnt be neccessary with the proper
routing, wireless configuration and filtering rules



>
> Regards,
> Sahana
>
> On Tue, Mar 24, 2015 at 1:16 PM, Sahana k.srinivas <sahana19793 at gmail.com>
> wrote:
>
>> Hi,
>>
>> I am having trouble setting up client to client communication in a
>> wireless network.
>> Consider I have three routers R1, R2, R3. Each of them are configured
>> with an ad-hoc network and an access point respectively. The wireless
>> interface is divided into two modes, one running ad-hoc mode (wlan0) and
>> other access point (wlan0-1). The ssid of the of the ad-hoc network of all
>> the routers is "mesh" (ip 192.168.1.x) and that of the access points is C0,
>> C1, C2 (192.168.2.x) of routers R1, R2, R3respectively. The router is
>> running OLSRD on wireless interface (wlan0). So when a client, say laptop
>> connects to the access point C0 of R1 and another laptop connects to C2 of
>> R3, then can C0 and C2 communicate with each other at 2 hops? if so how?
>>
>> Thanks in advance :)
>>
>>
>> Regards,
>> Sahana
>>
>
>
> _______________________________________________
> Babel-users mailing list
> Babel-users at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/babel-users/attachments/20150324/fa1c588f/attachment-0001.html>