<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:tahoma,new york,times,serif;font-size:10pt">I've been trying to put together a wireless mesh network with one openwrt lynksys router and 2 linux laptops.<br>After reading the documentation and the readme and the --help to both ahcpd and babel, I still can't make it work.<br>I want the router to be a "stateful autoritative ahcpd server with babel routing" that gives ipv6 and ipv4 adresses and that is staticaly configured!<br>One laptop should be a "stateful ahcpd server with babel routing" that is configured by the router then configures the second laptop.<br>Also if the above laptop fails (is shut down/ falls from the faculty floor) the second laptop should contact the router and reconfigure routing.<br><br><span style="font-weight: bold;">I've tried running </span><br>ahcp-generate -p fde6:20f5:c9ac:358: -P babel -n fde6:20f5:c9ac:358:1 -g
192.168.1.1 > ahcp.dat<br>ahcpd -d 99 -a /tmp/ahcp.dat -S 192.168.1.200 192.168.1.254 /tmp/ahcp-leases -n -c /tmp/dummy-config.sh wl0 br-lan<br><br><span style="font-weight: bold;">on the Router and "ahcpd -d 99 wlan0" on the client </span><br>MENTION: both router and laptop client were essid="WPIT" mod="Ad-hoc" signal strength=100%<br><br>the console messages on the server<br>"creat(unique_id): No such file or directory<br>Entering main loop.<br>Sleeping for 3.355s.<br>Sending AHCP reply on wl0..."<br><br>the console messages on the laptop client is attached<br><br>but some strange ipv6 is added to the laptop's wlan0 ::213:e8ff:feec:9a65<br>and no ipv4 for the client(no gateway, no dns).<br><br><br>CAN ANYONE PLS send some specific instructions on HOW to get this working SERVER---> CLIENT_SERVER----->CLIENT with babel routing!<br><br>Thanks in advance and waiting a reply<br></div><br>
</body></html>