<div dir="ltr">Hi, <div><br></div><div>I'm trying to put a number of Intel Edison development boards in a mesh network using babeld, using a Raspberry Pi 3 as a gateway.</div><div>The Intel Edison boards connect fine and routing tables are correctly being updated.</div><div><br></div><div>However on the Raspberry Pi side, the routes are added but they remain 'unreachable'. Further investigation revealed some possible reasons:</div><div><br></div><div><ul><li>The multicast messages originating from the Raspberry Pi contain a 802.1Q (QoS) header, which are not present on multicast packets from the Edison boards.</li><li>The babel logs show that the Raspberry Pi detects messages from the Edisons, but the Edisons do only detect some messages from the Raspberry Pi.</li><li>The RXCOST on the Edison side is INF, and accordingly the TXCOST on the Raspberry Pi side is INF.</li></ul><div><br></div></div><div>Any idea on how to solve this issue? Would be great if I could use a babel mesh network to connect the Intel Edisons through the Raspberry Pi to the internet.</div><div><br></div><div>Kind Regards, </div><div><br></div><div>Christopher</div><div><br></div></div>