[debian-edu-commits] [Debian Wiki] Update of "DebianEdu/Documentation/Wheezy/Installation" by HolgerLevsen

[Debian Wiki]

Dear Wiki user,

You have subscribed to a wiki page or wiki category on "Debian Wiki" for change notification.

The "DebianEdu/Documentation/Wheezy/Installation" page has been changed by HolgerLevsen:
http://wiki.debian.org/DebianEdu/Documentation/Wheezy/Installation?action=diff&rev1=11&rev2=12

Comment:
improve english

  
   The '''Main Server''', '''Workstation''' and '''Thin Client Server''' profiles are preselected. These profiles can be installed on one machine together if you want to install a so called ''combined main server''. This means the main server will be a thin client server and also be used as a workstation. This is the default choice, since we assume most people will install [[DebianEdu/Documentation/Wheezy/Installation#Installation_over_the_network_.28PXE.29_and_booting_diskless_clients|via PXE]] afterwards. Please note that you must have 2 network cards installed in a machine which is going to be installed as a combined main server or as a thin client server to become usefull after the installation. 
  
- /!\ The ordering of the network cards after installation can differ from the ordering during installation. The wanted ordering could be achieved by editing  {{{/etc/udev/rules.d/70-persistent-net.rules}}}: Replace eth0 with eth1 and eth1 with eth0; a reboot is needed for the changes to take effect. 
+ /!\ The ordering of the network cards after installation might differ from the ordering during installation. The wanted ordering can be achieved by editing  {{{/etc/udev/rules.d/70-persistent-net.rules}}}: Usually ''if this happens'', you will want to replace eth0 with eth1 and eth1 with eth0; a reboot is needed for the changes to take effect. 
  
   * Say "yes" or "no" to automatic partitioning. Be aware that saying "yes" will destroy all data on the hard drives!  Saying "no" on the other hand will require more work - you will need to make sure that the required partitions are created and are big enough.
  
@@ -181, +181 @@

  {{attachment:28-Diskless-WS-GRUB_Boot_menu-PXE.png}}
  
  This setup also allows diskless workstations and thin clients to be booted on the main network.
- Unlike workstations, diskless workstations don't need to be added with GOsa² (but could be).
+ Unlike workstations, diskless workstations don't have to be added to LDAP with GOsa², but can be, for example if you want to force the hostname.
  
  More information about network clients can be found in the [[DebianEdu/Documentation/Wheezy/HowTo/NetworkClients|Network clients HowTo]] chapter.