[debian-edu-commits] [Debian Wiki] Update of "DebianEdu/Documentation/Stretch/Maintenance" by HolgerLevsen

Debian Wiki debian-www at lists.debian.org
Wed May 18 21:48:51 UTC 2016


Dear Wiki user,

You have subscribed to a wiki page or wiki category on "Debian Wiki" for change notification.

The "DebianEdu/Documentation/Stretch/Maintenance" page has been changed by HolgerLevsen:
https://wiki.debian.org/DebianEdu/Documentation/Stretch/Maintenance

Comment:
start documentation for Stretch copying from Jessie pages

New page:
= Maintenance =
<<TableOfContents(2)>>

== Updating the software ==

This section explains how to use {{{apt-get upgrade}}}.

Using {{{apt-get}}} is really simply. To update a system you need to execute two commands on the command line as root: {{{apt-get update}}} (which updates the lists of available packages) and {{{apt-get upgrade}}} (which upgrades the packages for which an upgrade is available).

As Debian Edu uses libpam-tmpdir, setting a per user TMP directory, it is a good idea to run apt-get without the TMP and TMPDIR variables set in the LTSP chroot.  It is also a good idea to upgrade using the C locale to get known output and sorting order, even though that making a difference is a bug in a package.

{{{
LC_ALL=C apt-get update ; LC_ALL=C TMP= TMPDIR= ltsp-chroot apt-get update
LC_ALL=C apt-get upgrade -y
LC_ALL=C TMP= TMPDIR= ltsp-chroot -p apt-get upgrade -y
ltsp-update-kernels # If a new kernel was installed
}}}

/!\ It is important to run {{{ltsp-update-kernels}}} if a new kernel was installed in the LTSP chroot, to keep the kernel and kernel modules in sync.  The kernel is handed out via TFTP when the machine does PXE boot, and the kernel modules are fetched from the LTSP chroot.

It is also a good idea to install {{{cron-apt}}} and {{{apt-listchanges}}} and configure them to send mail to an address you are reading.

{{{cron-apt}}} will notify you once a day via email about any packages that can be upgraded. It does not install these upgrades, but does download them (usually in the night), so you don't have to wait for the download when you do {{{apt-get upgrade}}}.
## what does it do that you can't get more easily these days with "APT::Periodic::..." lines in an /etc/apt/apt.conf.d file?

Automatic installation of updates can be done easily if desired, it just needs the {{{unattended-upgrades}}} package to be installed and configured as described on [[https://wiki.debian.org/UnattendedUpgrades|wiki.debian.org/UnattendedUpgrades]].

{{{apt-listchanges}}} can send new changelog entries to you via email, or alternativly display them in the terminal when running {{{aptitude}}} or {{{apt-get}}}.

=== Keep yourself informed about security updates ===

Running {{{cron-apt}}} as described above is a good way to learn when security updates are available for installed packages.
Another way to stay informed about security updates is to subscribe to the [[http://lists.debian.org/debian-security-announce/|Debian security-announce mailinglist]], which has the benefit of also telling you what the security update is about. The downside (compared to {{{cron-apt}}}) is that it also includes information about updates for packages which aren't installed.

== Backup Management ==
For backup management point your browser to https://www/slbackup-php. Please note that you need to access this site via SSL, since you have to enter the root password there. If you try to access this site without using SSL it will fail. Note: the site will only work if you temporarily allow ssh root login on the backup server (tjener by default).

By default tjener will back up {{{/skole/tjener/home0}}}, {{{/etc/}}}, {{{/root/.svk}}} and LDAP to /skole/backup which is under the LVM. If you only want to have spare copies of things (in case you delete them) this setup should be fine for you.

/!\ Be aware that this backup scheme doesn't protect you from failing hard drives.

If you want to back up your data to an external server, a tape device or another hard drive you'll have to modify the existing configuration a bit.

If you want to restore a complete folder, your best option is to use the command-line:

{{{
$ sudo rdiff-backup -r <date>  \
   /skole/backup/tjener/skole/tjener/home0/user \
   /skole/tjener/home0/user_<date>
}}}

This will leave the content from {{{/skole/tjener/home0/user}}} for {{{<date>}}} in the folder {{{/skole/tjener/home0/user_<date>}}}

If you want to restore a single file, then you should be able to select the file (and the version) from the web interface, and download only that file.

If you want to get rid of older backups, choose "Maintenance" in the menu on the backup page and select the oldest snapshot to keep:

{{attachment:slbackup-php_maintenance.png|slbackup-php Maintenance|width=1024}}

== Server Monitoring ==

=== Munin ===

The Munin trend reporting system is available from [[https://www/munin/]].  It provides system status measurement graphs on a daily, weekly, monthly and yearly basis, and provides the system administrator with help when looking for bottlenecks and the source of system problems.

The list of machines being monitored using Munin is generated automatically, based on the list of hosts reporting to sitesummary.  All hosts with the package munin-node installed are registered for Munin monitoring.  It will normally take one day from a machine being installed until Munin monitoring starts, because of the order the cron jobs are executed.  To speed up the process, run {{{sitesummary-update-munin}}} as root on the sitesummary server (normally the main-server).  This will update the {{{/etc/munin/munin.conf}}} file.

The set of measurements being collected is automatically generated on each machine using the {{{munin-node-configure}}} program, which probes the plugins available from {{{/usr/share/munin/plugins/}}} and symlinks the relevant ones to {{{/etc/munin/plugins/}}}.

Information about Munin is available from http://munin.projects.linpro.no/ .

=== Nagios ===

Nagios system and service monitoring is available from [[https://www/nagios3/]]. The set of machines and services being monitored is automatically generated using information collected by the sitesummary system. The machines with the profile Main-server and Thin-client-server receive full monitoring, while workstations and thin clients receive simple monitoring. To enable full monitoring on a workstation, install the {{{nagios-nrpe-server}}} package on the workstation.

The username is {{{nagiosadmin}}} and the default password is {{{skolelinux}}}.
For security reasons, avoid using the same password as root. To change the password you can run the following command as root:

{{{
htpasswd /etc/nagios3/htpasswd.users nagiosadmin
}}}

By default Nagios does not send email. This can be changed by replacing {{{notify-by-nothing}}} with {{{host-notify-by-email}}} and {{{notify-by-email}}} in the file {{{/etc/nagios3/sitesummary-template-contacts.cfg}}}.

The Nagios configuration file used is {{{/etc/nagios3/sitesummary.cfg}}}.  The sitesummary cron job generates {{{/var/lib/sitesummary/nagios-generated.cfg}}} with the list of hosts and services to monitor.

Extra Nagios checks can be put in the file {{{/var/lib/sitesummary/nagios-generated.cfg.post}}} to get them included in the generated file.

Information about Nagios is available from http://www.nagios.org/ or in the {{{nagios3-doc}}} package.

==== Common Nagios warnings and how to handle them ====

Here are instructions on how to handle the most common Nagios warnings.

===== DISK CRITICAL - free space: /usr 309 MB (5% inode=47%): =====

The partition (/usr/ in the example) is too full.  There are in general two ways to handle this: (1) remove some files or (2) increase the size of the partition.  If the partition is /var/, purging the APT cache by calling {{{apt-get clean}}} might remove some files.  If there is more room available in the LVM volume group, running the program {{{debian-edu-fsautoresize}}} to extend the partitions might help.  To run this program automatically every hour, the host in question can be added to the {{{fsautoresize-hosts}}} netgroup.

===== APT CRITICAL: 13 packages available for upgrade (13 critical updates). =====

New package are available for upgrades.  The critical ones are normally security fixes.  To upgrade, run 'apt-get upgrade && apt-get dist-upgrade' as root in a terminal or log in via ssh to do the same.  On thin client servers, remember to also update the LTSP chroot using {{{ltsp-chroot apt-get update && ltsp-chroot apt-get upgrade}}}.

If you do not want to manually upgrade packages and trust Debian to do a good job with new versions, you can install the {{{unattended-upgrades}}} package and configure it to automatically upgrade all new packages every night.  This will not upgrade the LTSP chroots.

To upgrade the LTSP chroot, one can use {{{ltsp-chroot apt-get update && ltsp-chroot apt-get upgrade}}}.  On 64-bit servers, one will have to add {{{-a i386}}} as an argument to ltsp-chroot.  It is a good idea to update the chroot when updating the host system.

===== WARNING - Reboot required : running kernel = 2.6.32-37.81.0, installed kernel = 2.6.32-38.83.0  =====

The running kernel is older than the newest installed kernel, and a reboot is required to activate the newest installed kernel.  This is normally fairly urgent, as new kernels normally show up in Debian Edu to fix security issues.

===== WARNING: CUPS queue size - 61 =====

The printer queues in CUPS have a lot of jobs pending.  This is most likely because of a unavailable printer.  Disabled print queues are enabled every hour on hosts that are member of the {{{cups-queue-autoreenable-hosts}}} netgroup, so for such hosts no manual action should be required.  The print queues are emptied every night on hosts that are member of the {{{cups-queue-autoflush-hosts}}} netgroup.  If a host have a lot of jobs in their queue, consider adding this host to one or both of these netgroups.

=== Sitesummary ===

Sitesummary is used to collect information from each computer and submit it to the central server.  The information collected is available in {{{/var/lib/sitesummary/entries/}}}. Scripts in {{{/usr/lib/sitesummary/}}} are available to generate reports.

A simple report from sitesummary without any details is available from [[https://www/sitesummary/]].

Some documentation on sitesummary is available from http://wiki.debian.org/DebianEdu/HowTo/SiteSummary

== More information about Debian Edu customisations ==

More information about Debian Edu customisations useful for system administrators can be found in the [[DebianEdu/Documentation/Stretch/HowTo/Administration|Administration Howto chapter]] and in the [[DebianEdu/Documentation/Stretch/HowTo/AdvancedAdministration|Advanced administration Howto chapter]]

CategoryPermalink



More information about the debian-edu-commits mailing list