[debian-edu-commits] [Debian Wiki] Update of "DebianEdu/Documentation/Buster/Installation" by WolfgangSchweer

[Debian Wiki]

Dear Wiki user,

You have subscribed to a wiki page or wiki category on "Debian Wiki" for change notification.

The "DebianEdu/Documentation/Buster/Installation" page has been changed by WolfgangSchweer:
https://wiki.debian.org/DebianEdu/Documentation/Buster/Installation?action=diff&rev1=12&rev2=13

Comment:
add scenario including a proxy; thanks to Holger for revision and hint.

  
  === Main server installation scenarios ===
  
-  * Typical home network with Internet access through a router providing DHCP:
+  a. Typical school or home network with Internet access through a router providing DHCP:
    * Installation of a main server is possible, but after reboot there will be   no internet access (due to primary network interface IP 10.0.2.2/8).
-   * See the [[https://wiki.debian.org/DebianEdu/Documentation/Buster/Requirements#Internet_router|Internet router]] chapter for details how to set up a gateway if it is not possible to configure an existing one as needed.
+   * See the [[DebianEdu/Documentation/Buster/Requirements#Internet_router|Internet router]] chapter for details how to set up a gateway if it is not possible to configure an existing one as needed.
    * Connect all components like shown in the [[DebianEdu/Documentation/Buster/Architecture#Network|architecture]] chapter.
    * The main server should have Internet connection once bootet the first time in the correct environment. 
  
+  a. Typical school or institution network, similar to the one above, but with proxy use required.
+   * Add 'debian-edu-expert' to the kernel command line; see further below for details how this is done.
+   * Some additional questions must be answered, the proxy server related one included.
+ 
-  * Network with router/gateway IP 10.0.0.1/8 (which does not provide a DHCP server) and Internet access:
+  a. Network with router/gateway IP 10.0.0.1/8 (which does not provide a DHCP server) and Internet access:
    * As soon as the automatic network configuration fails (due to missing DHCP), choose manual network configuration
      * Enter 10.0.2.2/8 as host IP
      * Enter 10.0.0.1 as gateway IP
      * Enter 8.8.8.8 as nameserver IP unless you know better
    * The main server should just work after the first boot
  
-  * Offline (no Internet connection):
+  a. Offline (no Internet connection):
     * Use the USB ISO image
     * Make sure all (real/virtual) network cables are unplugged
     * Choose 'Do not configure the network at this time' (after DHCP failed to configure the network and you pressed 'Continue').