[debian-edu-commits] [Debian Wiki] Update of "DebianEdu/Status/Bullseye" by WolfgangSchweer

[Debian Wiki]

Dear Wiki user,

You have subscribed to a wiki page or wiki category on "Debian Wiki" for change notification.

The "DebianEdu/Status/Bullseye" page has been changed by WolfgangSchweer:
https://wiki.debian.org/DebianEdu/Status/Bullseye?action=diff&rev1=97&rev2=98

Comment:
add LTSP issue concerning LXQt desktop environment; improve some other information. Thanks to Dashamir Hoxha for spotting the issues.

  
   * At first boot of a combined server the SquashFS image for diskless workstation support is generated. This will take quite some time.
  
-  * In case of a separate or an additional LTSP server required information for setting up the LTSP client environment isn't complete during installation. Setup can be done once the system has been added with GOsa².
+  * In case of a separate or an additional LTSP server required information for setting up the LTSP client environment isn't complete during installation. Setup can be done once the system has been added with GOsa². For details, run {{{man debian-edu-ltsp-install}}} on the LTSP server, or read the [[DebianMan:debian-edu-ltsp-install|debian-edu-ltsp-install manual page online]].
  
  === Hints ===
  
@@ -65, +65 @@

  
  == Known problems that can be fixed locally ==
  
- If using thin clients, users should turn off compositing to avoid display artefacts; see DebianBug:1008602.
+  * If using thin clients, users should turn off compositing to avoid display artefacts; see DebianBug:1008602.
  
+  * On a separate LTSP server the DHCP service fails to start after stopping it; see DebianBug:1021414. To fix it, run as root user on the LTSP server:
- On a separate LTSP server the DHCP service fails to start after stopping it; see
- DebianBug:1021414.
- 
- To fix it, run as root user on the LTSP server:
  {{{
  sed -i 's/slapd/nslcd/' /usr/share/debian-edu-config/isc-dhcp-server.service.eth1_only
  cf-agent -I -D installation
  }}}
+ 
+  * On a separate LTSP server the Diskless Workstation networking setup fails to work '''in case desktop=lxqt is used'''. To fix it, replace connman with network-manager-gnome (!ConnMan is the preferred LXQt network manager):
+ {{{
+ apt install network-manager-gnome -y
+ apt purge connman -y
+ service networking restart
+ }}}
+  (Or reboot the system.)
+  Then rebuild the image: {{{debian-edu-ltsp-install --diskless_workstation yes}}}
  
  == Known problems that need to be fixed elsewhere ==