[debian-edu-commits] [Debian Wiki] Update of "DebianEdu/Documentation/Bookworm/Installation" by SerhiiHorichenko

[Debian Wiki]

Dear Wiki user,

You have subscribed to a wiki page or wiki category on "Debian Wiki" for change notification.

The "DebianEdu/Documentation/Bookworm/Installation" page has been changed by SerhiiHorichenko:
https://wiki.debian.org/DebianEdu/Documentation/Bookworm/Installation?action=diff&rev1=26&rev2=27

Comment:
switched "DHCP on internal" with "SSH port" - to be same as in current script on Debian 12 and added comment before Debian Edu Router Menu.

  }}}
  
  {{attachment:010-uif-config-method.png|Selecting the uif configuration method}}
+ 
  {{attachment:020-uif-config-confirm.png|Confirmation for setting up uif}}
  
  When asked about the uif firewall configuration method choose "debian-edu-router".  Confirm that you want to set up the firewall for Debian Edu Router.
  
  {{attachment:030-uif-allow-ping.png|Allowing ping in uif}}
+ 
  {{attachment:040-uif-allow-traceroute.png|Allowing traceroute in uif}}
  
  Decide whether you want to respond to ping and traceroute. If unsure answer with yes as it can be useful for diagnosing network issues.
  
+ 
  {{attachment:050-debian-edu-router-config-ip-forwarding.png|Enabling IP packet forwarding}}
  
  Confirm that you want to enable IP packet forwarding.
  
+ 
  {{attachment:060-debian-edu-router-config-network-setup.png|Selecting the network setup method}}
  
  Next, assign networks to the network interfaces in your router, choose one of the offered options depending on whether your network interfaces are already connected or not.
  
+ 
  {{attachment:070-debian-edu-router-config-uplink.png|Selecting the uplink interface}}
  
  Select the interface which is connected to the upstream network.
  
+ 
  {{attachment:080-debian-edu-router-config-networks.png|Selecting internal networks}}
  
  Select an internal network, in case you are unsure and simply want a single internal network select "Education" here.
  
+ 
  {{attachment:090-debian-edu-router-config-vlans.png|Enabling use of VLANs}}
  
  Select whether VLANs should be used for internal networks, if you are unsure select no here.
  
+ 
  {{attachment:100-debian-edu-router-config-ipv4-ipv6.png|Selecting supported IP versions}}
  
  Select "IPv4" here.
  
+ 
  {{attachment:110-debian-edu-router-config-static-ip.png|Selecting networks which require a static IP address}}
  
  Select "Uplink" if your upstream network requires a static IP address and, if you followed the above suggestion on internal networks, "Education".
  
+ 
  {{attachment:120-debian-edu-router-config-internal-network.png|Setting a static IP address for the internal network}}
  
  Set `10.0.0.1/8` as the static IP address for the internal network "Education" if you followed the above suggestion on internal networks.
  
+ 
  {{attachment:130-debian-edu-router-config-nat.png|Enabling NAT for networks}}
  
  Enable NAT for the internal network.
  
+ 
  {{attachment:140-debian-edu-router-config-internet-access.png|Enabling internet access for networks}}
  
  Enable internet access for internal networks.
  
+ 
  {{attachment:150-debian-edu-router-config-reverse-net.png|Setting up reverse NAT}}
  
  If you want to expose any internal services to the internet you can configure them using the described syntax.  Note that SSH access to the gateway can be configured using the following dialog.
  
+ 
  {{attachment:160-debian-edu-router-config-ssh.png|Enabling SSH access for networks}}
  
  Decide from which networks you want to allow SSH access to the gateway.
  
+ 
+ {{attachment:180-debian-edu-router-config-dhcp.png|Enabling DHCP for networks}}
+ 
+ Do not enable DHCP for the internal networks, it will be offered by the Debian Edu main server.
+ 
+ 
  {{attachment:170-debian-edu-router-config-ssh-port.png|Configuring the SSH port}}
  
  Configure the SSH port, this should be `22` if the configuration has not been changed.
  
- {{attachment:180-debian-edu-router-config-dhcp.png|Enabling DHCP for networks}}
- 
- Do not enable DHCP for the internal networks, it will be offered by the Debian Edu main server.
- 
  Connect the network interfaces if you have not already done so and reboot the machine.
+ Now, when you logging in as a root you should see Debian Edu Router Menu.
  
  {{attachment:190-debian-edu-router-config-main-menu.png|SSH main menu}}
+ 
  {{attachment:200-debian-edu-router-config-config-menu.png|SSH configuration}}
  
  If SSH access has been enabled the gateway can be reconfigured remotely via the menu offered when logging in as root. Pressing `c` in the main menu switches to the configuration menu from which all or parts of the configuration can be changed using the same dialogue system which was used for the initial configuration.