[med-svn] r2093 - in trunk/packages: . gdcm gdcm/trunk gdcm/trunk/debian
tille at alioth.debian.org
tille at alioth.debian.org
Wed Jun 25 09:19:54 UTC 2008
Author: tille
Date: 2008-06-25 09:19:53 +0000 (Wed, 25 Jun 2008)
New Revision: 2093
Added:
trunk/packages/gdcm/
trunk/packages/gdcm/tags/
trunk/packages/gdcm/trunk/
trunk/packages/gdcm/trunk/debian/
trunk/packages/gdcm/trunk/debian/README.Debian
trunk/packages/gdcm/trunk/debian/changelog
trunk/packages/gdcm/trunk/debian/compat
trunk/packages/gdcm/trunk/debian/control
trunk/packages/gdcm/trunk/debian/copyright
trunk/packages/gdcm/trunk/debian/libgdcm-tools.install
trunk/packages/gdcm/trunk/debian/libgdcm2-dev.install
trunk/packages/gdcm/trunk/debian/libgdcm2.docs
trunk/packages/gdcm/trunk/debian/libgdcm2.install
trunk/packages/gdcm/trunk/debian/libvtkgdcm-dev.install
trunk/packages/gdcm/trunk/debian/libvtkgdcm-tools.install
trunk/packages/gdcm/trunk/debian/libvtkgdcm.install
trunk/packages/gdcm/trunk/debian/pycompat
trunk/packages/gdcm/trunk/debian/python-gdcm.install
trunk/packages/gdcm/trunk/debian/python-vtkgdcm.install
trunk/packages/gdcm/trunk/debian/rules
Removed:
trunk/packages/gdmc/
Log:
Added gdcm project in properly spelled dir
Added: trunk/packages/gdcm/trunk/debian/README.Debian
===================================================================
--- trunk/packages/gdcm/trunk/debian/README.Debian (rev 0)
+++ trunk/packages/gdcm/trunk/debian/README.Debian 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,9 @@
+Debian packages of gdcm
+---------------------------
+
+There are 3 primary packages at this point:
+libgdcm, libgdcm-dev and libgdcm-dbg, which respectively
+provide the library, static and headers for the library, and debug symbols for
+the shared library.
+
+- Mathieu Malaterre.
Added: trunk/packages/gdcm/trunk/debian/changelog
===================================================================
--- trunk/packages/gdcm/trunk/debian/changelog (rev 0)
+++ trunk/packages/gdcm/trunk/debian/changelog 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,57 @@
+gdcm (2.0.6) experimental; urgency=low
+
+ [ Mathieu Malaterre ]
+ * Bump up
+
+ [ Andreas Tille ]
+ * debian/control
+ - Group maintenance by Debian Med team
+ - Vcs fields
+ - Homepage field
+ - Standards-Version: 3.8.0 (no changes needed)
+ * debian/rules: Patch suggested by Mathieu
+
+ -- Andreas Tille <tille at debian.org> Wed, 25 Jun 2008 10:12:45 +0200
+
+gdcm (2.0.5) experimental; urgency=low
+
+ * Bump up
+
+ -- Mathieu Malaterre <gdcm-developers at lists.sourceforge.net> Tue, 30 May 2008 16:15:26 -0500
+
+
+gdcm (2.0.4) unstable; urgency=low
+
+ * Bump up
+
+ -- Mathieu Malaterre <gdcm-developers at lists.sourceforge.net> Tue, 20 May 2008 16:15:26 -0500
+
+
+gdcm (2.0.3) unstable; urgency=low
+
+ * Bump up
+
+ -- Mathieu Malaterre <gdcm-developers at lists.sourceforge.net> Tue, 20 May 2008 16:15:25 -0500
+
+
+gdcm (2.0.2) unstable; urgency=low
+
+ * Bump up
+
+ -- Mathieu Malaterre <gdcm-developers at lists.sourceforge.net> Tue, 20 May 2008 16:15:24 -0500
+
+
+gdcm (2.0.1) unstable; urgency=low
+
+ * Bump up
+
+ -- Mathieu Malaterre <gdcm-developers at lists.sourceforge.net> Tue, 20 May 2008 16:15:23 -0500
+
+
+gdcm (2.0.0) unstable; urgency=low
+
+ * Initial Release. This is a dummy file, discard
+
+ -- Mathieu Malaterre <gdcm-developers at lists.sourceforge.net> Tue, 20 May 2008 16:15:22 -0500
+
+
Added: trunk/packages/gdcm/trunk/debian/compat
===================================================================
--- trunk/packages/gdcm/trunk/debian/compat (rev 0)
+++ trunk/packages/gdcm/trunk/debian/compat 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1 @@
+5
Added: trunk/packages/gdcm/trunk/debian/control
===================================================================
--- trunk/packages/gdcm/trunk/debian/control (rev 0)
+++ trunk/packages/gdcm/trunk/debian/control 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,101 @@
+Source: gdcm
+Section: libs
+Priority: optional
+Maintainer: Debian-Med Packaging Team <debian-med-packaging at lists.alioth.debian.org>
+DM-Upload-Allowed: yes
+Uploaders: Mathieu Malaterre <mathieu.malaterre at gmail.com>,
+ Andreas Tille <tille at debian.org>
+Build-Depends: debhelper (>= 5.0.37.2), python-all-dev (>= 2.3.5-11),
+ python-support (>= 0.3.9), uuid-dev, zlib1g-dev, libexpat1-dev,
+ swig, cmake, libvtk5-dev, python-vtk, libpng12-dev | libpng-dev
+Standards-Version: 3.8.0
+Vcs-Browser: http://svn.debian.org/wsvn/debian-med/trunk/packages/gdmc/trunk/?rev=0&sc=0
+Vcs-Svn: svn://svn.debian.org/svn/debian-med/trunk/packages/gdmc/trunk/
+Homepage: http://gdcm.sourceforge.net/
+
+Package: libgdcm2
+Architecture: any
+Depends: ${shlibs:Depends}
+Recommends: dcmtk
+Description: DICOM library
+ Grassroots DiCoM is a C++ library for dealing with DICOM medical files.
+ It is automatically wrapped to python (using swig). It supports RAW,JPEG,
+ J2K,JPEG lossless,RLE and deflate(zlib). It also comes with DICOM Part
+ 3,6 & 7 of the standard as XML files.
+
+Package: libgdcm-tools
+Architecture: any
+Section: utils
+Depends: ${shlibs:Depends}
+Description: Command line utilities for libgdcm
+ Libgdcm provides a number of command line debugging and utility programs.
+ Install this package for the gdcmdump, gdcmconv, gdcmimg, gdcmscanner,
+ gdcminfo, gdcmraw programs.
+
+Package: libgdcm2-dev
+Section: libdevel
+Provides: libgdcm-dev
+Conflicts: libgdcm-dev
+Architecture: any
+Depends: libgdcm2 (= ${binary:Version}), libuuid1
+Description: Headers and static libraries for libgdcm
+ Headers and static libraries for libgdcm. These are not needed to use
+ gdcm, but are needed to build plugins or programs that
+ link against libgdcm.
+
+Package: libgdcm2-dbg
+Architecture: any
+Priority: extra
+Depends: libgdcm2 (= ${binary:Version})
+Description: Debug symbols for libgdcm2
+ Debug symbols for libgdcm that will allow useful tracebacks and debugging
+ on end user machines.
+
+Package: python-gdcm
+Section: python
+Architecture: any
+Depends: ${shlibs:Depends}, ${python:Depends}, libgdcm2 (= ${binary:Version})
+Provides: ${python:Provides}
+XB-Python-Version: ${python:Versions}
+Description: Python bindings to the gdcm DICOM library
+ Python bindings to the gdcm DICOM library.
+
+Package: libvtkgdcm
+Architecture: any
+Depends: ${shlibs:Depends}, libvtk5
+Recommends: dcmtk
+Description: DICOM library
+ Grassroots DiCoM is a C++ library for dealing with DICOM medical files.
+ It is automatically wrapped to python (using swig). It supports RAW,JPEG,
+ J2K,JPEG lossless,RLE and deflate(zlib). It also comes with DICOM Part
+ 3,6 & 7 of the standard as XML files.
+
+Package: libvtkgdcm-dev
+Section: libdevel
+Provides: libvtkgdcm-dev
+Conflicts: libvtkgdcm-dev
+Architecture: any
+Depends: libgdcm2 (= ${binary:Version})
+Description: Headers and static libraries for libvtkgdcm
+ Headers and static libraries for libvtkgdcm. These are not needed to use
+ gdcm, but are needed to build plugins or programs that
+ link against libvtkgdcm.
+
+Package: python-vtkgdcm
+Section: python
+Architecture: any
+Depends: ${shlibs:Depends}, ${python:Depends}, libgdcm2 (= ${binary:Version})
+Provides: ${python:Provides}
+XB-Python-Version: ${python:Versions}
+Description: Python bindings to the gdcm DICOM library
+ Python bindings to the gdcm DICOM library.
+
+Package: libvtkgdcm-tools
+Architecture: any
+Section: utils
+Depends: ${shlibs:Depends}
+Description: Command line utilities for libvtkgdcm
+ Libvtkgdcm provides a number of command line debugging and utility programs.
+ Install this package for the gdcmviewer programs.
+
+
Added: trunk/packages/gdcm/trunk/debian/copyright
===================================================================
--- trunk/packages/gdcm/trunk/debian/copyright (rev 0)
+++ trunk/packages/gdcm/trunk/debian/copyright 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,70 @@
+This package was debianized by Mathieu Malaterre <mathieu.malaterre at gmail.com> on
+Wed, 18 Jun 2008 09:52:35 +1100
+
+It was downloaded from http://sf.net/projects/gdcm
+
+Upstream Authors:
+
+ Mathieu Malaterre <mathieu.malaterre at gmail.com>
+
+Copyright:
+
+ Copyright (c) 2006-2008 Mathieu Malaterre
+ Copyright (c) 1993-2005 CREATIS
+
+License:
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice,
+ this list of conditions and the following disclaimer in the documentation
+ and/or other materials provided with the distribution.
+
+ * Neither name of Mathieu Malaterre, or CREATIS, nor the names of any
+ contributors (CNRS, INSERM, UCB, Universite Lyon I), may be used to
+ endorse or promote products derived from this software without specific
+ prior written permission.
+
+ * Modified source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR
+ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+License for the cmake scripts:
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+1. Redistributions of source code must retain the copyright
+ notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+3. The name of the author may not be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Added: trunk/packages/gdcm/trunk/debian/libgdcm-tools.install
===================================================================
--- trunk/packages/gdcm/trunk/debian/libgdcm-tools.install (rev 0)
+++ trunk/packages/gdcm/trunk/debian/libgdcm-tools.install 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,6 @@
+usr/bin/gdcmdump*
+usr/bin/gdcmconv*
+usr/bin/gdcmimg*
+usr/bin/gdcminfo*
+usr/bin/gdcmraw*
+usr/bin/gdcmscanner*
Added: trunk/packages/gdcm/trunk/debian/libgdcm2-dev.install
===================================================================
--- trunk/packages/gdcm/trunk/debian/libgdcm2-dev.install (rev 0)
+++ trunk/packages/gdcm/trunk/debian/libgdcm2-dev.install 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,5 @@
+usr/lib/libgdcm*.so
+usr/lib/gdcm-2.*/*
+usr/include/gdcm-2.*/gdcm*
+usr/include/gdcm-2.*/zip*
+usr/include/gdcm-2.*/XML/*
Added: trunk/packages/gdcm/trunk/debian/libgdcm2.docs
===================================================================
--- trunk/packages/gdcm/trunk/debian/libgdcm2.docs (rev 0)
+++ trunk/packages/gdcm/trunk/debian/libgdcm2.docs 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1 @@
+README.txt
Added: trunk/packages/gdcm/trunk/debian/libgdcm2.install
===================================================================
--- trunk/packages/gdcm/trunk/debian/libgdcm2.install (rev 0)
+++ trunk/packages/gdcm/trunk/debian/libgdcm2.install 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1 @@
+usr/lib/libgdcm*.so.*
Added: trunk/packages/gdcm/trunk/debian/libvtkgdcm-dev.install
===================================================================
--- trunk/packages/gdcm/trunk/debian/libvtkgdcm-dev.install (rev 0)
+++ trunk/packages/gdcm/trunk/debian/libvtkgdcm-dev.install 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,2 @@
+usr/lib/libvtkgdcm*.so
+usr/include/gdcm-2.*/vtk*
Added: trunk/packages/gdcm/trunk/debian/libvtkgdcm-tools.install
===================================================================
--- trunk/packages/gdcm/trunk/debian/libvtkgdcm-tools.install (rev 0)
+++ trunk/packages/gdcm/trunk/debian/libvtkgdcm-tools.install 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1 @@
+usr/bin/gdcmviewer*
Added: trunk/packages/gdcm/trunk/debian/libvtkgdcm.install
===================================================================
--- trunk/packages/gdcm/trunk/debian/libvtkgdcm.install (rev 0)
+++ trunk/packages/gdcm/trunk/debian/libvtkgdcm.install 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1 @@
+usr/lib/libvtkgdcm*.so.*
Added: trunk/packages/gdcm/trunk/debian/pycompat
===================================================================
--- trunk/packages/gdcm/trunk/debian/pycompat (rev 0)
+++ trunk/packages/gdcm/trunk/debian/pycompat 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1 @@
+2
Added: trunk/packages/gdcm/trunk/debian/python-gdcm.install
===================================================================
--- trunk/packages/gdcm/trunk/debian/python-gdcm.install (rev 0)
+++ trunk/packages/gdcm/trunk/debian/python-gdcm.install 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,3 @@
+usr/lib/python*/site-packages/gdcm-2.*/gdcm.py
+usr/lib/python*/site-packages/gdcm-2.*/_gdcm.so
+usr/lib/python*/site-packages/gdcm.pth
Added: trunk/packages/gdcm/trunk/debian/python-vtkgdcm.install
===================================================================
--- trunk/packages/gdcm/trunk/debian/python-vtkgdcm.install (rev 0)
+++ trunk/packages/gdcm/trunk/debian/python-vtkgdcm.install 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,2 @@
+usr/lib/python*/site-packages/vtkgdcm.py
+usr/lib/python*/site-packages/libvtkgdcmPython.so
Added: trunk/packages/gdcm/trunk/debian/rules
===================================================================
--- trunk/packages/gdcm/trunk/debian/rules (rev 0)
+++ trunk/packages/gdcm/trunk/debian/rules 2008-06-25 09:19:53 UTC (rev 2093)
@@ -0,0 +1,140 @@
+#!/usr/bin/make -f
+# Based on the multi2 sample debian/rules file:
+# ---
+# Sample debian/rules that uses debhelper.
+# This file is public domain software, originally written by Joey Hess.
+#
+# This version is for a multibinary package. It also allows you to build any
+# of the binary packages independantly, via binary-<package> targets.
+# ---
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This has to be exported to make some magic below work.
+export DH_OPTIONS
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+CFLAGS = -Werror -g
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+
+export CFLAGS
+
+SRC := $(CURDIR)
+BUILD := $(CURDIR)/debian/build
+TARGET := $(CURDIR)/debian/tmp
+
+PYVERS := $(shell pyversions -vs)
+
+debian/configure-stamp: $(PYVERS:%=debian/configure-python%-stamp)
+ touch $@
+
+debian/configure-python%-stamp:
+ dh_testdir
+ [ -d $(BUILD)-python$* ] || mkdir $(BUILD)-python$*
+ cd $(BUILD)-python$* && cmake $(CURDIR) -DCMAKE_INSTALL_PREFIX="/usr" \
+ -DCMAKE_C_COMPILER="/usr/bin/cc" \
+ -DCMAKE_C_FLAGS="-g -Wall -O2" \
+ -DCMAKE_SKIP_RPATH=ON \
+ -DCMAKE_VERBOSE_MAKEFILE=ON \
+ -DGDCM_BUILD_APPLICATIONS=ON \
+ -DGDCM_BUILD_SHARED_LIBS=ON \
+ -DGDCM_WRAP_PYTHON=ON \
+ -DGDCM_BUILD_TESTING:BOOL=OFF \
+ -DCMAKE_BUILD_TYPE:STRING=Release \
+ -DGDCM_USE_SYSTEM_EXPAT:BOOL=ON \
+ -DGDCM_USE_SYSTEM_UUID:BOOL=ON \
+ -DGDCM_USE_SYSTEM_ZLIB:BOOL=ON \
+ -DGDCM_USE_VTK:BOOL=ON \
+ -DVTK_DIR:PATH=/usr/lib/vtk-5.0/ \
+ -DPREFERRED_PYTHON_VERSION=python$*
+ touch $@
+
+build: debian/build-stamp
+
+debian/build-stamp: debian/configure-stamp $(PYVERS:%=debian/build-python%-stamp)
+ touch $@
+
+debian/build-python%-stamp:
+ dh_testdir
+ $(MAKE) -j4 -C $(BUILD)-python$*
+ -(cd $(BUILD)-python$* && LD_LIBRARY_PATH=$(BUILD)-python$*/gdcm ctest --force-new-ctest-process -V)
+ touch $@
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f debian/configure*stamp debian/build*stamp
+ rm -rf debian/build*
+ dh_clean
+
+install: DH_OPTIONS=
+install: debian/build-stamp install-common $(PYVERS:%=install-python%)
+install-common:
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+install-python%:
+ $(MAKE) -j4 -C $(BUILD)-python$* install DESTDIR=$(TARGET)
+
+# This single target is used to build all the packages, all at once, or
+# one at a time. So keep in mind: any options passed to commands here will
+# affect _all_ packages. Anything you want to only affect one package
+# should be put in another target, such as the install target.
+binary-common:
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+ dh_installmenu
+# dh_installdebconf
+# dh_installlogrotate
+# dh_installemacsen
+# dh_installcatalogs
+# dh_installpam
+# dh_installmime
+# dh_installinit
+# dh_installman
+# dh_installcron
+# dh_installinfo
+ dh_install --sourcedir=$(TARGET) --fail-missing
+ dh_strip --dbg-package=libgdcm2-dbg
+ dh_link
+ dh_compress
+ dh_fixperms
+# dh_perl
+ dh_pysupport
+ dh_python
+ dh_makeshlibs -Xformats -V
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+# Build architecture independant packages using the common target.
+binary-indep: build install
+# (Uncomment this next line if you have such packages.)
+# $(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
+
+# Build architecture dependant packages using the common target.
+binary-arch: build install
+ $(MAKE) -f $(SRC)/debian/rules DH_OPTIONS=-a binary-common
+
+# Any other binary targets build just one binary package at a time.
+binary-%: build install
+ make -f $(SRC)/debian/rules binary-common DH_OPTIONS=-p$*
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary-common binary install install-common
Property changes on: trunk/packages/gdcm/trunk/debian/rules
___________________________________________________________________
Name: svn:executable
+ *
More information about the debian-med-commit
mailing list