[med-svn] [Git][med-team/probabel][master] 2 commits: Restore original versions of (actually unneeded) autotools stuff
Andreas Tille
gitlab at salsa.debian.org
Tue Aug 4 07:54:21 BST 2020
Andreas Tille pushed to branch master at Debian Med / probabel
Commits:
4ffc6ae8 by Andreas Tille at 2020-08-04T08:15:52+02:00
Restore original versions of (actually unneeded) autotools stuff
- - - - -
acbd91b1 by Andreas Tille at 2020-08-04T08:46:40+02:00
DEP3
- - - - -
6 changed files:
- compile
- debian/patches/examples.patch
- depcomp
- install-sh
- missing
- test-driver
Changes:
=====================================
compile
=====================================
@@ -1,9 +1,10 @@
#! /bin/sh
-# Wrapper for compilers which do not understand '-c -o'.
+# Wrapper for compilers which do not understand `-c -o'.
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2009-10-06.20; # UTC
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009 Free Software
+# Foundation, Inc.
# Written by Tom Tromey <tromey at cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -17,7 +18,7 @@ scriptversion=2018-03-07.03; # UTC
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <https://www.gnu.org/licenses/>.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -28,224 +29,21 @@ scriptversion=2018-03-07.03; # UTC
# bugs to <bug-automake at gnu.org> or send patches to
# <automake-patches at gnu.org>.
-nl='
-'
-
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent tools from complaining about whitespace usage.
-IFS=" "" $nl"
-
-file_conv=
-
-# func_file_conv build_file lazy
-# Convert a $build file to $host form and store it in $file
-# Currently only supports Windows hosts. If the determined conversion
-# type is listed in (the comma separated) LAZY, no conversion will
-# take place.
-func_file_conv ()
-{
- file=$1
- case $file in
- / | /[!/]*) # absolute file, and not a UNC file
- if test -z "$file_conv"; then
- # lazily determine how to convert abs files
- case `uname -s` in
- MINGW*)
- file_conv=mingw
- ;;
- CYGWIN*)
- file_conv=cygwin
- ;;
- *)
- file_conv=wine
- ;;
- esac
- fi
- case $file_conv/,$2, in
- *,$file_conv,*)
- ;;
- mingw/*)
- file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
- ;;
- cygwin/*)
- file=`cygpath -m "$file" || echo "$file"`
- ;;
- wine/*)
- file=`winepath -w "$file" || echo "$file"`
- ;;
- esac
- ;;
- esac
-}
-
-# func_cl_dashL linkdir
-# Make cl look for libraries in LINKDIR
-func_cl_dashL ()
-{
- func_file_conv "$1"
- if test -z "$lib_path"; then
- lib_path=$file
- else
- lib_path="$lib_path;$file"
- fi
- linker_opts="$linker_opts -LIBPATH:$file"
-}
-
-# func_cl_dashl library
-# Do a library search-path lookup for cl
-func_cl_dashl ()
-{
- lib=$1
- found=no
- save_IFS=$IFS
- IFS=';'
- for dir in $lib_path $LIB
- do
- IFS=$save_IFS
- if $shared && test -f "$dir/$lib.dll.lib"; then
- found=yes
- lib=$dir/$lib.dll.lib
- break
- fi
- if test -f "$dir/$lib.lib"; then
- found=yes
- lib=$dir/$lib.lib
- break
- fi
- if test -f "$dir/lib$lib.a"; then
- found=yes
- lib=$dir/lib$lib.a
- break
- fi
- done
- IFS=$save_IFS
-
- if test "$found" != yes; then
- lib=$lib.lib
- fi
-}
-
-# func_cl_wrapper cl arg...
-# Adjust compile command to suit cl
-func_cl_wrapper ()
-{
- # Assume a capable shell
- lib_path=
- shared=:
- linker_opts=
- for arg
- do
- if test -n "$eat"; then
- eat=
- else
- case $1 in
- -o)
- # configure might choose to run compile as 'compile cc -o foo foo.c'.
- eat=1
- case $2 in
- *.o | *.[oO][bB][jJ])
- func_file_conv "$2"
- set x "$@" -Fo"$file"
- shift
- ;;
- *)
- func_file_conv "$2"
- set x "$@" -Fe"$file"
- shift
- ;;
- esac
- ;;
- -I)
- eat=1
- func_file_conv "$2" mingw
- set x "$@" -I"$file"
- shift
- ;;
- -I*)
- func_file_conv "${1#-I}" mingw
- set x "$@" -I"$file"
- shift
- ;;
- -l)
- eat=1
- func_cl_dashl "$2"
- set x "$@" "$lib"
- shift
- ;;
- -l*)
- func_cl_dashl "${1#-l}"
- set x "$@" "$lib"
- shift
- ;;
- -L)
- eat=1
- func_cl_dashL "$2"
- ;;
- -L*)
- func_cl_dashL "${1#-L}"
- ;;
- -static)
- shared=false
- ;;
- -Wl,*)
- arg=${1#-Wl,}
- save_ifs="$IFS"; IFS=','
- for flag in $arg; do
- IFS="$save_ifs"
- linker_opts="$linker_opts $flag"
- done
- IFS="$save_ifs"
- ;;
- -Xlinker)
- eat=1
- linker_opts="$linker_opts $2"
- ;;
- -*)
- set x "$@" "$1"
- shift
- ;;
- *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
- func_file_conv "$1"
- set x "$@" -Tp"$file"
- shift
- ;;
- *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
- func_file_conv "$1" mingw
- set x "$@" "$file"
- shift
- ;;
- *)
- set x "$@" "$1"
- shift
- ;;
- esac
- fi
- shift
- done
- if test -n "$linker_opts"; then
- linker_opts="-link$linker_opts"
- fi
- exec "$@" $linker_opts
- exit 1
-}
-
-eat=
-
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: compile [--help] [--version] PROGRAM [ARGS]
-Wrapper for compilers which do not understand '-c -o'.
-Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
arguments, and rename the output as expected.
If you are trying to build a whole package this is not the
-right script to run: please start by reading the file 'INSTALL'.
+right script to run: please start by reading the file `INSTALL'.
Report bugs to <bug-automake at gnu.org>.
EOF
@@ -255,14 +53,11 @@ EOF
echo "compile $scriptversion"
exit $?
;;
- cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
- icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
- func_cl_wrapper "$@" # Doesn't return...
- ;;
esac
ofile=
cfile=
+eat=
for arg
do
@@ -271,8 +66,8 @@ do
else
case $1 in
-o)
- # configure might choose to run compile as 'compile cc -o foo foo.c'.
- # So we strip '-o arg' only if arg is an object.
+ # configure might choose to run compile as `compile cc -o foo foo.c'.
+ # So we strip `-o arg' only if arg is an object.
eat=1
case $2 in
*.o | *.obj)
@@ -299,10 +94,10 @@ do
done
if test -z "$ofile" || test -z "$cfile"; then
- # If no '-o' option was seen then we might have been invoked from a
+ # If no `-o' option was seen then we might have been invoked from a
# pattern rule where we don't need one. That is ok -- this is a
# normal compilation that the losing compiler can handle. If no
- # '.c' file was seen then we are probably linking. That is also
+ # `.c' file was seen then we are probably linking. That is also
# ok.
exec "$@"
fi
@@ -311,7 +106,7 @@ fi
cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
# Create the lock directory.
-# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# Note: use `[/\\:.-]' here to ensure that we don't use the same name
# that we are using for the .o file. Also, base the name on the expected
# object file name, since that is what matters with a parallel build.
lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
@@ -340,9 +135,9 @@ exit $ret
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
=====================================
debian/patches/examples.patch
=====================================
@@ -1,3 +1,7 @@
+Author: Pranav Ballaney
+Last-Update: 2020-08-03 20:45:43 +0530
+Description: Fix path in example scripts
+
--- a/examples/example_bt.sh
+++ b/examples/example_bt.sh
@@ -9,7 +9,7 @@ gtdatadir="gtdata"
=====================================
depcomp
=====================================
@@ -1,9 +1,10 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -16,7 +17,7 @@ scriptversion=2018-03-07.03; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <https://www.gnu.org/licenses/>.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -27,9 +28,9 @@ scriptversion=2018-03-07.03; # UTC
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -39,11 +40,11 @@ as side-effects.
Environment variables:
depmode Dependency tracking mode.
- source Source file read by 'PROGRAMS ARGS'.
- object Object file output by 'PROGRAMS ARGS'.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputting dependencies.
+ tmpdepfile Temporary file to use when outputing dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake at gnu.org>.
@@ -56,66 +57,6 @@ EOF
;;
esac
-# Get the directory component of the given path, and save it in the
-# global variables '$dir'. Note that this directory component will
-# be either empty or ending with a '/' character. This is deliberate.
-set_dir_from ()
-{
- case $1 in
- */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
- *) dir=;;
- esac
-}
-
-# Get the suffix-stripped basename of the given path, and save it the
-# global variable '$base'.
-set_base_from ()
-{
- base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
-}
-
-# If no dependency file was actually created by the compiler invocation,
-# we still have to create a dummy depfile, to avoid errors with the
-# Makefile "include basename.Plo" scheme.
-make_dummy_depfile ()
-{
- echo "#dummy" > "$depfile"
-}
-
-# Factor out some common post-processing of the generated depfile.
-# Requires the auxiliary global variable '$tmpdepfile' to be set.
-aix_post_process_depfile ()
-{
- # If the compiler actually managed to produce a dependency file,
- # post-process it.
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependency.h'.
- # Do two passes, one to just change these to
- # $object: dependency.h
- # and one to simply output
- # dependency.h:
- # which is needed to avoid the deleted-header problem.
- { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
- sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
- } > "$depfile"
- rm -f "$tmpdepfile"
- else
- make_dummy_depfile
- fi
-}
-
-# A tabulation character.
-tab=' '
-# A newline character.
-nl='
-'
-# Character ranges might be problematic outside the C locale.
-# These definitions help.
-upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
-lower=abcdefghijklmnopqrstuvwxyz
-digits=0123456789
-alpha=${upper}${lower}
-
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
@@ -128,9 +69,6 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
-# Avoid interferences from the environment.
-gccflag= dashmflag=
-
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
@@ -142,32 +80,18 @@ if test "$depmode" = hp; then
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
-fi
-
-if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
-fi
-
-if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u="sed s,\\\\\\\\,/,g"
+ depmode=msvisualcpp
fi
case "$depmode" in
@@ -190,7 +114,8 @@ gcc3)
done
"$@"
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
@@ -198,17 +123,13 @@ gcc3)
;;
gcc)
-## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
-## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
-## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say). Also, it might not be
-## supported by the other compilers which use the 'gcc' depmode.
+## -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
@@ -216,31 +137,31 @@ gcc)
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- # The second -e expression handles DOS-style file names with drive
- # letters.
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the "deleted header file" problem.
+## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
-## Some versions of gcc put a space before the ':'. On the theory
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
## that the space means something, we add a space to the output as
-## well. hp depmode also adds that space, but also prefixes the VPATH
-## to the object. Take care to not repeat it in the output.
+## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -258,7 +179,8 @@ sgi)
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
@@ -266,41 +188,43 @@ sgi)
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
+
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like '#:fec' to the end of the
+ # the IRIX cc adds comments like `#:fec' to the end of the
# dependency line.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
- | tr "$nl" ' ' >> "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> "$depfile"
echo >> "$depfile"
+
# The second pass generates a dummy entry for each header file.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
else
- make_dummy_depfile
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile"
;;
-xlc)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts '$object:' at the
+ # current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- set_dir_from "$object"
- set_base_from "$object"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
@@ -313,7 +237,9 @@ aix)
"$@" -M
fi
stat=$?
- if test $stat -ne 0; then
+
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
@@ -322,100 +248,44 @@ aix)
do
test -f "$tmpdepfile" && break
done
- aix_post_process_depfile
- ;;
-
-tcc)
- # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
- # FIXME: That version still under development at the moment of writing.
- # Make that this statement remains true also for stable, released
- # versions.
- # It will wrap lines (doesn't matter whether long or short) with a
- # trailing '\', as in:
- #
- # foo.o : \
- # foo.c \
- # foo.h \
- #
- # It will put a trailing '\' even on the last line, and will use leading
- # spaces rather than leading tabs (at least since its commit 0394caf7
- # "Emit spaces for -MD").
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
fi
- rm -f "$depfile"
- # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
- # We have to change lines of the first kind to '$object: \'.
- sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
- # And for each line of the second kind, we have to emit a 'dep.h:'
- # dummy dependency, to avoid the deleted-header problem.
- sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
-## The order of this option in the case statement is important, since the
-## shell code in configure will try each of these formats in the order
-## listed in this file. A plain '-MD' option would be understood by many
-## compilers, so we must ensure this comes after the gcc and icc options.
-pgcc)
- # Portland's C compiler understands '-MD'.
- # Will always output deps to 'file.d' where file is the root name of the
- # source file under compilation, even if file resides in a subdirectory.
- # The object file name does not affect the name of the '.d' file.
- # pgcc 10.2 will output
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\' :
+ # and will wrap long lines using \ :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- set_dir_from "$object"
- # Use the source, not the object, to determine the base name, since
- # that's sadly what pgcc will do too.
- set_base_from "$source"
- tmpdepfile=$base.d
-
- # For projects that build the same source file twice into different object
- # files, the pgcc approach of using the *source* file root name can cause
- # problems in parallel builds. Use a locking strategy to avoid stomping on
- # the same $tmpdepfile.
- lockdir=$base.d-lock
- trap "
- echo '$0: caught signal, cleaning up...' >&2
- rmdir '$lockdir'
- exit 1
- " 1 2 13 15
- numtries=100
- i=$numtries
- while test $i -gt 0; do
- # mkdir is a portable test-and-set.
- if mkdir "$lockdir" 2>/dev/null; then
- # This process acquired the lock.
- "$@" -MD
- stat=$?
- # Release the lock.
- rmdir "$lockdir"
- break
- else
- # If the lock is being held by a different process, wait
- # until the winning process is done or we timeout.
- while test -d "$lockdir" && test $i -gt 0; do
- sleep 1
- i=`expr $i - 1`
- done
- fi
- i=`expr $i - 1`
- done
- trap - 1 2 13 15
- if test $i -le 0; then
- echo "$0: failed to acquire lock after $numtries attempts" >&2
- echo "$0: check lockdir '$lockdir'" >&2
- exit 1
- fi
- if test $stat -ne 0; then
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile"
exit $stat
fi
@@ -427,8 +297,8 @@ pgcc)
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
- | sed -e 's/$/ :/' >> "$depfile"
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -439,8 +309,9 @@ hp2)
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- set_dir_from "$object"
- set_base_from "$object"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -451,7 +322,8 @@ hp2)
"$@" +Maked
fi
stat=$?
- if test $stat -ne 0; then
+ if test $stat -eq 0; then :
+ else
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -461,107 +333,77 @@ hp2)
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add 'dependent.h:' lines.
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
else
- make_dummy_depfile
+ echo "#dummy" > "$depfile"
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- set_dir_from "$object"
- set_base_from "$object"
-
- if test "$libtool" = yes; then
- # Libtool generates 2 separate objects for the 2 libraries. These
- # two compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir$base.o.d # libtool 1.5
- tmpdepfile2=$dir.libs/$base.o.d # Likewise.
- tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -ne 0; then
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
- do
- test -f "$tmpdepfile" && break
- done
- # Same post-processing that is required for AIX mode.
- aix_post_process_depfile
- ;;
-
-msvc7)
- if test "$libtool" = yes; then
- showIncludes=-Wc,-showIncludes
- else
- showIncludes=-showIncludes
- fi
- "$@" $showIncludes > "$tmpdepfile"
- stat=$?
- grep -v '^Note: including file: ' "$tmpdepfile"
- if test $stat -ne 0; then
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- # The first sed program below extracts the file names and escapes
- # backslashes for cygpath. The second sed program outputs the file
- # name when reading, but also accumulates all include files in the
- # hold buffer in order to output them again at the end. This only
- # works with sed implementations that can handle large buffers.
- sed < "$tmpdepfile" -n '
-/^Note: including file: *\(.*\)/ {
- s//\1/
- s/\\/\\\\/g
- p
-}' | $cygpath_u | sort -u | sed -n '
-s/ /\\ /g
-s/\(.*\)/'"$tab"'\1 \\/p
-s/.\(.*\) \\/\1:/
-H
-$ {
- s/.*/'"$tab"'/
- G
- p
-}' >> "$depfile"
- echo >> "$depfile" # make sure the fragment doesn't end with a backslash
- rm -f "$tmpdepfile"
- ;;
-
-msvc7msys)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
@@ -580,7 +422,7 @@ dashmstdout)
shift
fi
- # Remove '-o $object'.
+ # Remove `-o $object'.
IFS=" "
for arg
do
@@ -600,18 +442,18 @@ dashmstdout)
done
test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for ':'
+ # Require at least two characters before searching for `:'
# in the target name. This is to cope with DOS-style filenames:
- # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
"$@" $dashmflag |
- sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this sed invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -661,15 +503,12 @@ makedepend)
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
- # makedepend may prepend the VPATH from the source file name to the object.
- # No need to regex-escape $object, excess matching of '.' is harmless.
- sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process the last invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed '1,2d' "$tmpdepfile" \
- | tr ' ' "$nl" \
- | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -686,7 +525,7 @@ cpp)
shift
fi
- # Remove '-o $object'.
+ # Remove `-o $object'.
IFS=" "
for arg
do
@@ -705,10 +544,10 @@ cpp)
esac
done
- "$@" -E \
- | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- | sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -740,23 +579,23 @@ msvisualcpp)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
- echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -783,9 +622,9 @@ exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
=====================================
install-sh
=====================================
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2018-03-11.20; # UTC
+scriptversion=2009-04-28.21; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -35,21 +35,25 @@ scriptversion=2018-03-11.20; # UTC
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
-# 'make' implicit rules from creating a file called install from it
+# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
-tab=' '
nl='
'
-IFS=" $tab$nl"
+IFS=" "" $nl"
-# Set DOITPROG to "echo" to test this script.
+# set DOITPROG to echo to test this script
+# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-doit_exec=${doit:-exec}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -64,6 +68,17 @@ mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
posix_mkdir=
# Desired mode of installed file.
@@ -82,7 +97,7 @@ dir_arg=
dst_arg=
copy_on_change=false
-is_target_a_directory=possibly
+no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -122,57 +137,42 @@ while test $# -ne 0; do
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t)
- is_target_a_directory=always
- dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ -t) dst_arg=$2
+ shift;;
- -T) is_target_a_directory=never;;
+ -T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
shift
done
-# We allow the use of options -d and -T together, by making -d
-# take the precedence; this is for compatibility with GNU install.
-
-if test -n "$dir_arg"; then
- if test -n "$dst_arg"; then
- echo "$0: target directory not allowed when installing a directory." >&2
- exit 1
- fi
-fi
-
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
@@ -186,10 +186,6 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
fi
shift # arg
dst_arg=$arg
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
done
fi
@@ -198,26 +194,13 @@ if test $# -eq 0; then
echo "$0: no input file specified." >&2
exit 1
fi
- # It's OK to call 'install-sh -d' without argument.
+ # It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
- if test $# -gt 1 || test "$is_target_a_directory" = always; then
- if test ! -d "$dst_arg"; then
- echo "$0: $dst_arg: Is not a directory." >&2
- exit 1
- fi
- fi
-fi
-
-if test -z "$dir_arg"; then
- do_exit='(exit $ret); exit $ret'
- trap "ret=129; $do_exit" 1
- trap "ret=130; $do_exit" 2
- trap "ret=141; $do_exit" 13
- trap "ret=143; $do_exit" 15
+ trap '(exit $?); exit' 1 2 13 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
@@ -228,16 +211,16 @@ if test -z "$dir_arg"; then
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -245,9 +228,9 @@ fi
for src
do
- # Protect names problematic for 'test' and other utilities.
+ # Protect names starting with `-'.
case $src in
- -* | [=\(\)!]) src=./$src;;
+ -*) src=./$src;;
esac
if test -n "$dir_arg"; then
@@ -269,115 +252,129 @@ do
echo "$0: no destination specified." >&2
exit 1
fi
+
dst=$dst_arg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst;;
+ esac
- # If destination is a directory, append the input filename.
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
if test -d "$dst"; then
- if test "$is_target_a_directory" = never; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
- dstbase=`basename "$src"`
- case $dst in
- */) dst=$dst$dstbase;;
- *) dst=$dst/$dstbase;;
- esac
+ dst=$dstdir/`basename "$src"`
dstdir_status=0
else
- dstdir=`dirname "$dst"`
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
test -d "$dstdir"
dstdir_status=$?
fi
fi
- case $dstdir in
- */) dstdirslash=$dstdir;;
- *) dstdirslash=$dstdir/;;
- esac
-
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- # Note that $RANDOM variable is not portable (e.g. dash); Use it
- # here however when possible just to lower collision chance.
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-
- trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- # Because "mkdir -p" follows existing symlinks and we likely work
- # directly in world-writeable /tmp, make sure that the '$tmpdir'
- # directory is successfully created first before we actually test
- # 'mkdir -p' feature.
- if (umask $mkdir_umask &&
- $mkdirprog $mkdir_mode "$tmpdir" &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- test_tmpdir="$tmpdir/a"
- ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
@@ -387,51 +384,53 @@ do
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
esac
+ eval "$initialize_posix_glob"
+
oIFS=$IFS
IFS=/
- set -f
+ $posix_glob set -f
set fnord $dstdir
shift
- set +f
+ $posix_glob set +f
IFS=$oIFS
prefixes=
for d
do
- test X"$d" = X && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -444,8 +443,8 @@ do
else
# Make a couple of temp file names in the proper directory.
- dsttmp=${dstdirslash}_inst.$$_
- rmtmp=${dstdirslash}_rm.$$_
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
@@ -466,12 +465,15 @@ do
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
- set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- set +f &&
+ $posix_glob set +f &&
+
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
@@ -484,24 +486,24 @@ do
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
@@ -510,9 +512,9 @@ do
done
# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
=====================================
missing
=====================================
@@ -1,9 +1,9 @@
#! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2012-06-26.16; # UTC
-# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -17,7 +17,7 @@ scriptversion=2018-03-07.03; # UTC
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <https://www.gnu.org/licenses/>.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -101,9 +101,9 @@ else
exit $st
fi
-perl_URL=https://www.perl.org/
-flex_URL=https://github.com/westes/flex
-gnu_software_URL=https://www.gnu.org/software
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
program_details ()
{
@@ -160,7 +160,7 @@ give_advice ()
;;
autom4te*)
echo "You might have modified some maintainer files that require"
- echo "the 'autom4te' program to be rebuilt."
+ echo "the 'automa4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
@@ -207,9 +207,9 @@ give_advice "$1" | sed -e '1s/^/WARNING: /' \
exit $st
# Local variables:
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
=====================================
test-driver
=====================================
@@ -1,9 +1,9 @@
#! /bin/sh
# test-driver - basic testsuite driver script.
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2012-06-27.10; # UTC
-# Copyright (C) 2011-2018 Free Software Foundation, Inc.
+# Copyright (C) 2011-2013 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -16,7 +16,7 @@ scriptversion=2018-03-07.03; # UTC
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <https://www.gnu.org/licenses/>.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -44,12 +44,13 @@ print_usage ()
Usage:
test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
[--expect-failure={yes|no}] [--color-tests={yes|no}]
- [--enable-hard-errors={yes|no}] [--]
- TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
+ [--enable-hard-errors={yes|no}] [--] TEST-SCRIPT
The '--test-name', '--log-file' and '--trs-file' options are mandatory.
END
}
+# TODO: better error handling in option parsing (in particular, ensure
+# TODO: $log_file, $trs_file and $test_name are defined).
test_name= # Used for reporting.
log_file= # Where to save the output of the test script.
trs_file= # Where to save the metadata of the test run.
@@ -68,23 +69,10 @@ while test $# -gt 0; do
--enable-hard-errors) enable_hard_errors=$2; shift;;
--) shift; break;;
-*) usage_error "invalid option: '$1'";;
- *) break;;
esac
shift
done
-missing_opts=
-test x"$test_name" = x && missing_opts="$missing_opts --test-name"
-test x"$log_file" = x && missing_opts="$missing_opts --log-file"
-test x"$trs_file" = x && missing_opts="$missing_opts --trs-file"
-if test x"$missing_opts" != x; then
- usage_error "the following mandatory options are missing:$missing_opts"
-fi
-
-if test $# -eq 0; then
- usage_error "missing argument"
-fi
-
if test $color_tests = yes; then
# Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
red='[0;31m' # Red.
@@ -106,14 +94,11 @@ trap "st=143; $do_exit" 15
# Test script is run here.
"$@" >$log_file 2>&1
estatus=$?
-
if test $enable_hard_errors = no && test $estatus -eq 99; then
- tweaked_estatus=1
-else
- tweaked_estatus=$estatus
+ estatus=1
fi
-case $tweaked_estatus:$expect_failure in
+case $estatus:$expect_failure in
0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
0:*) col=$grn res=PASS recheck=no gcopy=no;;
77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
@@ -122,12 +107,6 @@ case $tweaked_estatus:$expect_failure in
*:*) col=$red res=FAIL recheck=yes gcopy=yes;;
esac
-# Report the test outcome and exit status in the logs, so that one can
-# know whether the test passed or failed simply by looking at the '.log'
-# file, without the need of also peaking into the corresponding '.trs'
-# file (automake bug#11814).
-echo "$res $test_name (exit status: $estatus)" >>$log_file
-
# Report outcome to console.
echo "${col}${res}${std}: $test_name"
@@ -140,9 +119,9 @@ echo ":copy-in-global-log: $gcopy" >> $trs_file
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'before-save-hook 'time-stamp)
+# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC0"
+# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:
View it on GitLab: https://salsa.debian.org/med-team/probabel/-/compare/e7ce630dd24b4a9b0e87925a00680bfffd187cae...acbd91b1c566de0abb3ab26be01b93343f23887a
--
View it on GitLab: https://salsa.debian.org/med-team/probabel/-/compare/e7ce630dd24b4a9b0e87925a00680bfffd187cae...acbd91b1c566de0abb3ab26be01b93343f23887a
You're receiving this email because of your account on salsa.debian.org.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://alioth-lists.debian.net/pipermail/debian-med-commit/attachments/20200804/a1d57042/attachment-0001.html>
More information about the debian-med-commit
mailing list