[Debian-med-packaging] Bug#798514: (no subject)
Jeremy B
boukenty at gmail.com
Wed Sep 9 15:29:40 UTC 2015
Subject: orthanc: blockUI requires jQuery v1.2.3 or later! You are using v1.11.3
Package: orthanc
Version: 0.9.3+dfsg-1+b1
Severity: important
Dear Maintainer,
*** Reporter, please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these template lines ***
-- System Information:
Distributor ID: Raspbian
Description: Raspbian GNU/Linux testing (stretch)
Release: testing
Codename: stretch
Architecture: armv7l
Kernel: Linux 4.1.6-v7+ (SMP w/4 CPU cores; PREEMPT)
Locale: LANG=fr_FR, LC_CTYPE=fr_FR (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages orthanc depends on:
ii adduser 3.113+nmu3
ii dcmtk 3.6.0-15.1
ii libboost-filesystem1.58.0 1.58.0+dfsg-3
ii libboost-locale1.58.0 1.58.0+dfsg-3
ii libboost-regex1.58.0 1.58.0+dfsg-3
ii libboost-system1.58.0 1.58.0+dfsg-3
ii libboost-thread1.58.0 1.58.0+dfsg-3
ii libc6 2.19-19
ii libcurl3 7.44.0-1
ii libdcmtk2v5 3.6.0-15.1
ii libgcc1 1:5.2.1-16
ii libjsoncpp0v5 0.10.5-1
ii liblua5.1-0 5.1.5-8
ii libpng12-0 1.2.50-2+b2
ii libpugixml1v5 1.4-3
ii libsqlite3-0 3.8.11.1-1
ii libssl1.0.0 1.0.2d-1
ii libstdc++6 5.2.1-16
ii libuuid1 2.26.2-9
ii zlib1g 1:1.2.8.dfsg-2+b1
orthanc recommends no packages.
orthanc suggests no packages.
-- Configuration Files:
/etc/orthanc/orthanc.json changed:
{
/**
* General configuration of Orthanc
**/
// The logical name of this instance of Orthanc. This one is
// displayed in Orthanc Explorer and at the URI "/system".
"Name" : "MyOrthanc",
// Path to the directory that holds the heavyweight files
// (i.e. the raw DICOM instances)
"StorageDirectory" : "OrthancStorage",
// Path to the directory that holds the SQLite index (if unset,
// the value of StorageDirectory is used). This index could be
// stored on a RAM-drive or a SSD device for performance reasons.
"IndexDirectory" : "OrthancStorage",
// Enable the transparent compression of the DICOM instances
"StorageCompression" : false,
// Maximum size of the storage in MB (a value of "0" indicates no
// limit on the storage size)
"MaximumStorageSize" : 0,
// Maximum number of patients that can be stored at a given time
// in the storage (a value of "0" indicates no limit on the number
// of patients)
"MaximumPatientCount" : 0,
// List of paths to the custom Lua scripts that are to be loaded
// into this instance of Orthanc
"LuaScripts" : [
],
// List of paths to the plugins that are to be loaded into this
// instance of Orthanc (e.g. "./libPluginTest.so" for Linux, or
// "./PluginTest.dll" for Windows). These paths can refer to
// folders, in which case they will be scanned non-recursively to
// find shared libraries.
"Plugins" : [
],
/**
* Configuration of the HTTP server
**/
// HTTP port for the REST services and for the GUI
"HttpPort" : 8042,
/**
* Configuration of the DICOM server
**/
// The DICOM Application Entity Title
"DicomAet" : "ORTHANC",
// Check whether the called AET corresponds during a DICOM request
"DicomCheckCalledAet" : false,
// The DICOM port
"DicomPort" : 4242,
// The default encoding that is assumed for DICOM files without
// "SpecificCharacterSet" DICOM tag. The allowed values are "Ascii",
// "Utf8", "Latin1", "Latin2", "Latin3", "Latin4", "Latin5",
// "Cyrillic", "Windows1251", "Arabic", "Greek", "Hebrew", "Thai",
// "Japanese", and "Chinese".
"DefaultEncoding" : "Latin1",
// The transfer syntaxes that are accepted by Orthanc C-Store SCP
"DeflatedTransferSyntaxAccepted" : true,
"JpegTransferSyntaxAccepted" : true,
"Jpeg2000TransferSyntaxAccepted" : true,
"JpegLosslessTransferSyntaxAccepted" : true,
"JpipTransferSyntaxAccepted" : true,
"Mpeg2TransferSyntaxAccepted" : true,
"RleTransferSyntaxAccepted" : true,
/**
* Security-related options for the HTTP server
**/
// Whether remote hosts can connect to the HTTP server
"RemoteAccessAllowed" : true,
// Whether or not SSL is enabled
"SslEnabled" : false,
// Path to the SSL certificate (meaningful only if SSL is enabled)
"SslCertificate" : "certificate.pem",
// Whether or not the password protection is enabled
"AuthenticationEnabled" : true,
// The list of the registered users. Because Orthanc uses HTTP
// Basic Authentication, the passwords are stored as plain text.
"RegisteredUsers" : {
// "alice" : "alicePassword"
"demo" : "2634demo"
},
/**
* Network topology
**/
// The list of the known DICOM modalities
"DicomModalities" : {
/**
* Uncommenting the following line would enable Orthanc to
* connect to an instance of the "storescp" open-source DICOM
* store (shipped in the DCMTK distribution) started by the
* command line "storescp 2000".
**/
// "sample" : [ "STORESCP", "localhost", 2000 ]
/**
* A fourth parameter is available to enable patches for a
* specific PACS manufacturer. The allowed values are currently
* "Generic" (default value), "StoreScp" (storescp tool from
* DCMTK), "ClearCanvas", "MedInria", "Dcm4Chee" and
* "SyngoVia". This parameter is case-sensitive.
**/
// "clearcanvas" : [ "CLEARCANVAS", "192.168.1.1", 104, "ClearCanvas" ]
},
// The list of the known Orthanc peers
"OrthancPeers" : {
/**
* Each line gives the base URL of an Orthanc peer, possibly
* followed by the username/password pair (if the password
* protection is enabled on the peer).
**/
// "peer" : [ "http://localhost:8043/", "alice", "alicePassword" ]
// "peer2" : [ "http://localhost:8044/" ]
},
// Parameters of the HTTP proxy to be used by Orthanc. If set to the
// empty string, no HTTP proxy is used. For instance:
// "HttpProxy" : "192.168.0.1:3128"
// "HttpProxy" : "proxyUser:proxyPassword at 192.168.0.1:3128"
"HttpProxy" : "",
/**
* Advanced options
**/
// Dictionary of symbolic names for the user-defined metadata. Each
// entry must map a number between 1024 and 65535 to an unique
// string.
"UserMetadata" : {
// "Sample" : 1024
},
// Dictionary of symbolic names for the user-defined types of
// attached files. Each entry must map a number between 1024 and
// 65535 to an unique string.
"UserContentType" : {
// "sample" : 1024
},
// Number of seconds without receiving any instance before a
// patient, a study or a series is considered as stable.
"StableAge" : 60,
// Enable the HTTP server. If this parameter is set to "false",
// Orthanc acts as a pure DICOM server. The REST API and Orthanc
// Explorer will not be available.
"HttpServerEnabled" : true,
// Enable the DICOM server. If this parameter is set to "false",
// Orthanc acts as a pure REST server. It will not be possible to
// receive files or to do query/retrieve through the DICOM protocol.
"DicomServerEnabled" : true,
// By default, Orthanc compares AET (Application Entity Titles) in a
// case-insensitive way. Setting this option to "true" will enable
// case-sensitive matching.
"StrictAetComparison" : false,
// When the following option is "true", the MD5 of the DICOM files
// will be computed and stored in the Orthanc database. This
// information can be used to detect disk corruption, at the price
// of a small performance overhead.
"StoreMD5ForAttachments" : true,
// The maximum number of results for a single C-FIND request at the
// Patient, Study or Series level. Setting this option to "0" means
// no limit.
"LimitFindResults" : 0,
// The maximum number of results for a single C-FIND request at the
// Instance level. Setting this option to "0" means no limit.
"LimitFindInstances" : 0,
// The maximum number of active jobs in the Orthanc scheduler. When
// this limit is reached, the addition of new jobs is blocked until
// some job finishes.
"LimitJobs" : 10,
// If this option is set to "false", Orthanc will not log the
// resources that are exported to other DICOM modalities of Orthanc
// peers in the URI "/exports". This is useful to prevent the index
// to grow indefinitely in auto-routing tasks.
"LogExportedResources" : true,
// Enable or disable HTTP Keep-Alive (deprecated). Set this option
// to "true" only in the case of high HTTP loads.
"KeepAlive" : false,
// If this option is set to "false", Orthanc will run in index-only
// mode. The DICOM files will not be stored on the drive.
"StoreDicom" : true,
// DICOM associations are kept open as long as new DICOM commands
// are issued. This option sets the number of seconds of inactivity
// to wait before automatically closing a DICOM association. If set
// to 0, the connection is closed immediately.
"DicomAssociationCloseDelay" : 5,
// Maximum number of query/retrieve DICOM requests that are
// maintained by Orthanc. The least recently used requests get
// deleted as new requests are issued.
"QueryRetrieveSize" : 10,
// When handling a C-Find SCP request, setting this flag to "false"
// will enable case-insensitive match for PN value representation
// (such as PatientName). By default, the search is case-insensitive.
"CaseSensitivePN" : false
}
-- no debconf information
More information about the Debian-med-packaging
mailing list