[Debian-med-packaging] Bug#997059: intake 0.6.6-1 apparently okay with ipv6

[Étienne Mollier]

Version: 0.6.6-1

Greetings,

After quite a long hiatus, I finally had a look back at intake
failure to build from source on ipv6 only hosts.  I did not
reproduce the issue after configuring my laptop to only run on
ipv6 addressing.  It seems to me the update to version 0.6.6
could have fixed the issue; or it could have been fixed by an
update in a dependency perhaps.

For reference, the interface linked to the Internet was only
having one public and one network local ipv6 addresses, no ipv4
allowed here, but the loopback was still having ipv4 addressing
during the test, as it seemed to be also the case on the buildd
(although I couldn't check for myself):

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever

I'm closing the issue for now, but feel free to reopen if I
didn't configure my machine correctly and symptoms were to come
back.

Have a nice day,  :)
-- 
Étienne Mollier <emollier at emlwks999.eu>
Fingerprint:  8f91 b227 c7d6 f2b1 948c  8236 793c f67e 8f0d 11da
Sent from /dev/pts/2, please excuse my verbosity.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://alioth-lists.debian.net/pipermail/debian-med-packaging/attachments/20230130/97d68f03/attachment.sig>