salome_5.1.3-8_amd64.changes is NEW

Archive Administrator installer at ftp-master.debian.org
Fri May 7 18:35:25 UTC 2010 

(new) libsalome-dev_5.1.3-8_all.deb extra contrib/libdevel
Numerical simulation pre- and post-processor development files
 Salomé is a pre- and post-processor for numerical simulations.  It can import
 CAD files in IGES and STEP formats, facilitates component integration in
 heterogeneous systems, and has a user-friendly GUI as well as a Python console
 with all of the platform functionality.
 .
 This package contains the Salomé headers, .so shared lib symlinks, IDL files,
 and .m4 files.
(new) libsalome5.1.3-0_5.1.3-8_amd64.deb extra contrib/libs
Numerical simulation pre- and post-processor development files
 Salomé is a pre- and post-processor for numerical simulations.  It can import
 CAD files in IGES and STEP formats, facilitates component integration in
 heterogeneous systems, and has a user-friendly GUI as well as a Python console
 with all of the platform functionality.
 .
 This package contains the Salomé shared libraries.
(new) python2.5-salome_5.1.3-8_amd64.deb extra contrib/python
Numerical simulation pre- and post-processor
 Salomé is a pre- and post-processor for numerical simulations.  It can import
 CAD files in IGES and STEP formats, facilitates component integration in
 heterogeneous systems, and has a user-friendly GUI as well as a Python console
 with all of the platform functionality.
 .
 This package contains the Salomé Python site packages.
(new) salome-common_5.1.3-8_all.deb extra contrib/science
Numerical simulation pre- and post-processor
 Salomé is a pre- and post-processor for numerical simulations.  It can import
 CAD files in IGES and STEP formats, facilitates component integration in
 heterogeneous systems, and has a user-friendly GUI as well as a Python console
 with all of the platform functionality.
 .
 This package contains the architecture-independent runtime resources needed to
 run Salomé.
(new) salome-examples_5.1.3-8_all.deb extra contrib/doc
Numerical simulation pre- and post-processor documentation
 Salomé is a pre- and post-processor for numerical simulations.  It can import
 CAD files in IGES and STEP formats, facilitates component integration in
 heterogeneous systems, and has a user-friendly GUI as well as a Python console
 with all of the platform functionality.
 .
 This package contains example files for Salomé.
(new) salome_5.1.3-8.debian.tar.gz extra contrib/science
(new) salome_5.1.3-8.dsc extra contrib/science
(new) salome_5.1.3-8_amd64.deb extra contrib/science
Numerical simulation pre- and post-processor
 Salomé is a pre- and post-processor for numerical simulations.  It can import
 CAD files in IGES and STEP formats, facilitates component integration in
 heterogeneous systems, and has a user-friendly GUI as well as a Python console
 with all of the platform functionality.
 .
 This package contains the Salomé runtime binaries and scripts in
 /usr/bin/salome and /usr/bin.
(new) salome_5.1.3.orig.tar.gz extra contrib/science
Changes: salome (5.1.3-8) unstable; urgency=low
 .
  * Removed the salome-doc binary package to cut disk space use dramatically.
  * Moved SALOME_ContainerPy.py back to /usr/bin and dropped the Py.py ending.
  * Moved SALOME_Container and other python scripts to python2.5-salome.
  * Made python2.5-salome conflict with old salome because of this.
  * Stripped .sh from shell script file names in /usr/bin .
 .
salome (5.1.3-7) unstable; urgency=low
 .
  * Added quilt Build-Dependency.
 .
salome (5.1.3-6) unstable; urgency=low
 .
  [ Andre Espaze ]
  * Added libsalome-dev dependency to salome, as it's necessary for now.
  * Added LD_LIBRARY_PATH setting to runSalome.in.
 .
  [ Gerber van der Graaf ]
  * Menu entry in salome.menu file.
 .
  [ Adam C. Powell, IV ]
  * Removed modules: VISU doesn't build, SIERPINSKY depends on it, NETGENPLUGIN
    but requires significant updates to work with Debian's 4.9.x package.
  * Revamped rules so build-arch/install-arch/binary-arch doesn't do all of the
    documentation building.
  * Un-did some of Andre's changes regarding python file permissions and .awk
    and .tgz file locations.
  * New salome.desktop file for Applications menu entry.
  * Added quilt pop -a and removal of .pc to debian/rules clean target.
  * Added libopencascade-visualization-dev dependency to salome.
  * Patched runSalome.py to not require executable .py files.
  * Changed to omniidl[-python] Build-Dep reflecting unstable name change.
  * Changed control file encoding to UTF-8.
  * First upload (closes: #457075).
 .
salome (5.1.3-5) unstable; urgency=low
 .
  * Python 2.5/2.6 installation flexibility to build on Ubuntu Karmic.
  * New modules: NETGENPLUGIN, YACS, MULTIPR, LIGHT, PYLIGHT.
  * Started module XDATA, need to finish fixing very broken clean target.
  * Generalize MPI usage away from OpenMPI-only.
  * Fixed the runSalome script UnitsAPI directory location, added DISABLE_FPE=1
    so the GEOM module works properly, and added new module root dirs.
  * Fixed the killSalome script by making it config-able.
  * Updated install target in rules.
  * Changed salome-common dependency on salome to Recommends.
  * Removed .la files from -dev package.
  * Added ${misc:Depends} to all package dependencies.
  * Corrected debhelper and python-central Build-Depends etc.
  * Bumped Standards-Version.
 .
salome (5.1.3-4) unstable; urgency=low
 .
  * Team maintenance by debian-science.
  * Complete source code copyright audit by Gerber van der Graaf, updated
    copyright and included all of his analysis in the copyright-audit
    directory.
  * New modules: COMPONENT, CALCULATOR, PYCALCULATOR, SIERPINSKY.
  * Started module NETGENPLUGIN, need libnetgen-dev B-D and possibly patches.
  * Tell salome about new VTK 5.4.
  * Fixed Makefile clean targets so the tree goes back to its original state.
  * Updated OpenCascade detection to include data files.
 .
salome (5.1.3-3) unstable; urgency=low
 .
  * New modules: RANDOMIZER, HELLO, PYHELLO, VISU, SMESH.
  * All patches are now upstream-ready except kernel-mpi-libs which is
    Debian-specific.
 .
salome (5.1.3-2) unstable; urgency=low
 .
  * New modules: GUI, GEOM, MED.
  * Lots of new patches and Build-Depends!
  * Removed patch-stamp and unpatch targets since source format 3.0 takes care
    of that.
 .
salome (5.1.3-1) unstable; urgency=low
 .
  * New upstream release.
  * Starting simple -- just builds two modules for now.
  * Switch to dpkg-source 3.0 (quilt) format.
  * Bumped Standards-Version.
  * Changed approach to HDF5/MPI linkage.
  * Started backporting patches -- thankfully some are already in upstream.
 .
salome (3.2.6-7) unstable; urgency=low
 .
  * Fixed sip by a QT_VERS change.
  * Fixed netgen plugin link directory problem.
  * Added automake to xdata configure target.
  * Using python-central properly for python2.4-salome and salome-xdata.
  * Lots of cleanups inspired by lintian.
 .
salome (3.2.6-6) unstable; urgency=low
 .
  * OmniORB 4.1.x port has no known build bugs now (thanks: Thomas Girard).
  * Added build-deps python-qt-dev, sip4, python-sip4-dev, and libvtk5-qt3-dev.
  * Created Build-Conflicts against other MPI implementations.
 .
salome (3.2.6-5) unstable; urgency=low
 .
  * New patch porting to omniORB 4.1.x (thanks: Thomas Girard).
 .
salome (3.2.6-4) unstable; urgency=low
 .
  * Added NETGENPLUGIN module (required considerable hacking).
  * Changed libdev package to arch all because it is.
  * Concatenated .m4 files into salome.m4 for libdev package.
  * Moved IDL files to /usr/share/idl/salome.
  * Added new salome-xdata package.
  * Added examples package with content from SAMPLES directory.
  * Added more inter-package dependencies.
  * Added the CASROOT valiable and three derivatives to the runSalome script.
  * A new README.Debian.html file explains the package and gives a TODO list.
  * Added bindir=/usr/bin to avoid having stuff in /usr/bin/salome.
  * Removed the $bindir/appliskel and $bindir/styles directories.
  * Removed executable bit on xdata .png and .qm resources files.
  * New docs generated by "make usr_docs" and "make dev_docs".
 .
salome (3.2.6-3) unstable; urgency=low
 .
  * Ported the VISU and SMESH modules to VTK 5.
  * Completed packaging for the VISU and SMESH modules.
  * Removed the GetPropagationSource() method from the StdMeshers_Propagation
    class because it causes a link relocation error (why??).
  * Added gfortran and libboost-signals-dev to Build-Depends.
  * Completed building of packages conforming to FHS standard.
  * Added _ROOT_DIR and PYTHONPATH variables to runSalome script.
  * Made a link /usr/bin/runSalome to /usr/bin/salome/runSalome.
  * Added a salome-common package for the resources.
 .
salome (3.2.6-2) unstable; urgency=low
 .
  * Patched KERNEL OpenCASCADE, MPI and HDF5 .m4 files for Debian.
  * Fixed many C++ headers to include hdf5 without extern "C", and before med.
  * Hacked KERNEL_SRC_3.2.6/src/Communication/SALOME_Comm_i.hxx to
    include missing #defines needed by ios_base.h (is this a compiler bug?).
  * Set libdir=/usr/lib.
  * Added general packaging for all of the modules.
  * Omitting NETGENPLUGIN for now because interface seems to have changed.
  * Omitting GHS3DPLUGIN because it is non-free.
  * Patched all modules' missing DESTDIR support.
  * Fixed all modules' deprecated file references.
  * Removed all modules' extraneous aclocal.m4 target dependencies.
  * Fixed several modules' incorrect KERNEL IDL directory settings.
  * Fixed all modules' erroneous creation of salome_adm directories, which
    prevents the proper link from forming.
  * Removed modules' copying adm_local to builddir because we build in place.
  * Hacked GUI, GEOM and SMESH modules' check functions so configuring all
    modules before building them all works.
  * Fixed MED, RANDOMIZER and VISU modules' check functions.
  * Patched modules so they can include headers and link to libs in place.
  * Fixed executables' linking to properly use libtool --mode=link.
  * Fixed modules' makefiles to install to proper libdir.
  * Ported GUI module to VTK 5 and sip 4.7.
  * Added missing sources explicitly to Makefile.in to get around a make bug.
  * Fixed MED for Debian libmed-dev compatibility and header completeness.
  * Added KERNEL variables to the PY* modules' makefiles.
 .
salome (3.2.6-1) unstable; urgency=low
 .
  * First Debianization of Salomé.
  * Needs to use MPI prefix for HDF5 prefix because HDF5 test comes first
    (i.e. upstream assumes that HDF5 is independent of MPI).
  * Patches configure to include -lmpi++ in MPI_LIBS and properly specify
    the Debian location of OpenCASCADE headers.


Override entries for your package:

Announcing to debian-devel-changes at lists.debian.org
Closing bugs: 457075 


Your package contains new components which requires manual editing of
the override file.  It is ok otherwise, so please be patient.  New
packages are usually added to the override file about once a week.

You may have gotten the distribution wrong.  You'll get warnings above
if files already exist in other distributions.

More information about the debian-science-maintainers mailing list