Bug#976558: python-fluids: FTBFS: dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.8 3.9" returned exit code 13
Lucas Nussbaum
lucas at debian.org
Sat Dec 5 13:11:52 GMT 2020
Source: python-fluids
Version: 0.1.78-1
Severity: serious
Justification: FTBFS on arm64
Tags: bullseye sid ftbfs
Usertags: ftbfs-20201205 ftbfs-bullseye
Hi,
During a rebuild of all packages in sid, your package failed to build
on arm64 (I don't know if it also fails on amd64).
Relevant part (hopefully):
> make[1]: Entering directory '/<<PKGBUILDDIR>>'
> dh_auto_build
> I: pybuild base:232: /usr/bin/python3.8 setup.py build
> running build
> running build_py
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/filters.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/drag.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/units.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/separator.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/packed_tower.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/two_phase_voidage.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/safety_valve.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/core.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/jet_pump.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/geometry.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/vectorized.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/pump.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/piping.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/mixing.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/two_phase.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/design_climate.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/fittings.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/control_valve.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/compressible.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/friction.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/packed_bed.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/flow_meter.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/particle_size_distribution.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/open_flow.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/saltation.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> copying fluids/atmosphere.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 conical contractions K part 2.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 conical contractions K part 1.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/ISO 3310-1 sieves.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 abrupt contraction K.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 conical diffuser Kd.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 entrances rounded beveled K.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/ASTM E11 sieves.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 smooth bends Kb.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/residential power.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 smooth bends outlet tangent length correction.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 smooth bends Re correction.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 Kb mitre bend.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/3 phase power.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> copying fluids/data/isd-history-cleaned.tsv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/data
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/README -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/LICENSE -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/nrlmsise_00.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/nrlmsise_00_header.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/nrlmsise_00_data.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/nrlmsise00
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/hwm123114.bin -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/gd2qd.dat -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/hwm14.pyf -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/irradiance.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/hwm93.for -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/hwm93.pyf -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/spa.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/dwm07b104i.dat -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/pychebfun.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> copying fluids/optional/hwm14.f90 -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/numerics
> copying fluids/numerics/arrays.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/numerics
> copying fluids/numerics/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/numerics
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/constants
> copying fluids/constants/constants.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/constants
> copying fluids/constants/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/constants
> I: pybuild base:232: /usr/bin/python3 setup.py build
> running build
> running build_py
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/filters.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/drag.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/units.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/separator.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/packed_tower.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/two_phase_voidage.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/safety_valve.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/core.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/jet_pump.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/geometry.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/vectorized.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/pump.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/piping.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/mixing.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/two_phase.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/design_climate.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/fittings.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/control_valve.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/compressible.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/friction.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/packed_bed.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/flow_meter.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/particle_size_distribution.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/open_flow.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/saltation.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> copying fluids/atmosphere.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 conical contractions K part 2.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 conical contractions K part 1.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/ISO 3310-1 sieves.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 abrupt contraction K.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 conical diffuser Kd.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 entrances rounded beveled K.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/ASTM E11 sieves.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 smooth bends Kb.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/residential power.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 smooth bends outlet tangent length correction.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 smooth bends Re correction.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/Miller 2E 1990 Kb mitre bend.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/3 phase power.csv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> copying fluids/data/isd-history-cleaned.tsv -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/data
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/README -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/LICENSE -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/nrlmsise_00.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/nrlmsise_00_header.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00
> copying fluids/nrlmsise00/nrlmsise_00_data.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/nrlmsise00
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/hwm123114.bin -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/gd2qd.dat -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/hwm14.pyf -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/irradiance.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/hwm93.for -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/hwm93.pyf -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/spa.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/dwm07b104i.dat -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/pychebfun.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> copying fluids/optional/hwm14.f90 -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/numerics
> copying fluids/numerics/arrays.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/numerics
> copying fluids/numerics/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/numerics
> creating /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/constants
> copying fluids/constants/constants.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/constants
> copying fluids/constants/__init__.py -> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/constants
> PYTHONPATH=. python3 -m sphinx -N -bhtml docs/ build/html # HTML generator
> Running Sphinx v3.3.1
> Matplotlib created a temporary config/cache directory at /tmp/matplotlib-l81sms3m because the default path (/sbuild-nonexistent/.config/matplotlib) is not a writable directory; it is highly recommended to set the MPLCONFIGDIR environment variable to a writable directory, in particular to speed up the import of Matplotlib and to better support multiprocessing.
> making output directory... done
> [autosummary] generating autosummary for: Examples/Crane TP 410 Solved Problems/7.1 Smooth Pipe (Plastic).ipynb, Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam.ipynb, Examples/Crane TP 410 Solved Problems/7.11 Flat heating Coils - Water.ipynb, Examples/Crane TP 410 Solved Problems/7.13 Flow given in English Units - Oil.ipynb, Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's Theorem-Water.ipynb, Examples/Crane TP 410 Solved Problems/7.2 L, L over D and K from Kv for Conventional Type Valves.ipynb, Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation.ipynb, Examples/Crane TP 410 Solved Problems/7.3 L, L over D, K, and Kv for Conventional Type Valves.ipynb, Examples/Crane TP 410 Solved Problems/7.4 Venturi Type Valves.ipynb, Examples/Crane TP 410 Solved Problems/7.5 Lift Check Valves.ipynb, ..., fluids.safety_valve.rst, fluids.saltation.rst, fluids.separator.rst, fluids.two_phase.rst, fluids.two_phase_voidage.rst, fluids.units.rst, fluids.vectorized.rst, index.rst, modules.rst, tutorial.rst
> building [mo]: targets for 0 po files that are out of date
> building [html]: targets for 43 source files that are out of date
> updating environment: [new config] 43 added, 0 changed, 0 removed
> reading sources... [ 2%] Examples/Crane TP 410 Solved Problems/7.1 Smooth Pipe (Plastic)
> reading sources... [ 4%] Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam
> reading sources... [ 6%] Examples/Crane TP 410 Solved Problems/7.11 Flat heating Coils - Water
> reading sources... [ 9%] Examples/Crane TP 410 Solved Problems/7.13 Flow given in English Units - Oil
> reading sources... [ 11%] Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's Theorem-Water
> reading sources... [ 13%] Examples/Crane TP 410 Solved Problems/7.2 L, L over D and K from Kv for Conventional Type Valves
> reading sources... [ 16%] Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation
> reading sources... [ 18%] Examples/Crane TP 410 Solved Problems/7.3 L, L over D, K, and Kv for Conventional Type Valves
> reading sources... [ 20%] Examples/Crane TP 410 Solved Problems/7.4 Venturi Type Valves
> reading sources... [ 23%] Examples/Crane TP 410 Solved Problems/7.5 Lift Check Valves
> reading sources... [ 25%] Examples/Crane TP 410 Solved Problems/7.6 Reduced Port Ball Valve
> reading sources... [ 27%] Examples/Crane TP 410 Solved Problems/7.7 Laminar flow in Valves, Fittings, and Pipe - System from Example 7.6
> reading sources... [ 30%] Examples/Crane TP 410 Solved Problems/7.8 Laminar flow in Valves, Fittings, and Pipe - SAE oil through a pipe and globe valve
> reading sources... [ 32%] examples
> reading sources... [ 34%] fluids
> reading sources... [ 37%] fluids.atmosphere
> reading sources... [ 39%] fluids.compressible
> reading sources... [ 41%] fluids.control_valve
> reading sources... [ 44%] fluids.core
> reading sources... [ 46%] fluids.drag
> reading sources... [ 48%] fluids.filters
> reading sources... [ 51%] fluids.fittings
> reading sources... [ 53%] fluids.flow_meter
> reading sources... [ 55%] fluids.friction
> reading sources... [ 58%] fluids.geometry
> reading sources... [ 60%] fluids.jet_pump
> reading sources... [ 62%] fluids.mixing
> reading sources... [ 65%] fluids.open_flow
> reading sources... [ 67%] fluids.packed_bed
> reading sources... [ 69%] fluids.packed_tower
> reading sources... [ 72%] fluids.particle_size_distribution
> reading sources... [ 74%] fluids.piping
> reading sources... [ 76%] fluids.pump
> reading sources... [ 79%] fluids.safety_valve
> reading sources... [ 81%] fluids.saltation
> reading sources... [ 83%] fluids.separator
> reading sources... [ 86%] fluids.two_phase
> reading sources... [ 88%] fluids.two_phase_voidage
> reading sources... [ 90%] fluids.units
> reading sources... [ 93%] fluids.vectorized
> reading sources... [ 95%] index
> reading sources... [ 97%] modules
> reading sources... [100%] tutorial
>
> /<<PKGBUILDDIR>>/fluids/compressible.py:docstring of fluids.compressible.isentropic_T_rise_compression:45: WARNING: Inline interpreted text or phrase reference start-string without end-string.
> /<<PKGBUILDDIR>>/fluids/core.py:docstring of fluids.core.Stanton:43: WARNING: Duplicate explicit target name: "re94116c74050-1".
> /<<PKGBUILDDIR>>/fluids/core.py:docstring of fluids.core.Stanton:43: WARNING: duplicate citation Re94116c74050-1, other instance in /<<PKGBUILDDIR>>/docs/fluids.core.rst
> /<<PKGBUILDDIR>>/fluids/friction.py:docstring of fluids.friction.one_phase_dP_gravitational:2: WARNING: Inline interpreted text or phrase reference start-string without end-string.
> /<<PKGBUILDDIR>>/fluids/friction.py:docstring of fluids.friction.one_phase_dP_dz_acceleration:2: WARNING: Unknown target name: "2".
> /<<PKGBUILDDIR>>/fluids/geometry.py:docstring of fluids.geometry.PlateExchanger.plate_enlargement_factor_analytical:27: WARNING: Block quote ends without a blank line; unexpected unindent.
> /<<PKGBUILDDIR>>/fluids/jet_pump.py:docstring of fluids.jet_pump.liquid_jet_pump:127: WARNING: Unexpected indentation.
> /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of fluids.packed_bed.Brauer:62: WARNING: Duplicate explicit target name: "re6bc2120fa12-2".
> /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of fluids.packed_bed.Harrison_Brunner_Hecker:64: WARNING: Unexpected indentation.
> /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of fluids.packed_bed.Brauer:62: WARNING: duplicate citation Re6bc2120fa12-2, other instance in /<<PKGBUILDDIR>>/docs/fluids.packed_bed.rst
> /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of fluids.packed_bed.Brauer:2: WARNING: Unknown target name: "3".
> /<<PKGBUILDDIR>>/fluids/packed_bed.py:docstring of fluids.packed_bed.Brauer:51: WARNING: Unknown target name: "3".
> /<<PKGBUILDDIR>>/fluids/particle_size_distribution.py:docstring of fluids.particle_size_distribution.ParticleSizeDistribution.vssa:7: WARNING: Explicit markup ends without a blank line; unexpected unindent.
> /<<PKGBUILDDIR>>/fluids/particle_size_distribution.py:docstring of fluids.particle_size_distribution.ParticleSizeDistribution.vssa:8: WARNING: Unexpected section title.
>
> Returns
> -------
> /<<PKGBUILDDIR>>/fluids/two_phase_voidage.py:docstring of fluids.two_phase_voidage.Lin_Kwok:2: WARNING: Unknown target name: "3".
> /<<PKGBUILDDIR>>/docs/tutorial.rst:640: WARNING: Inline interpreted text or phrase reference start-string without end-string.
> looking for now-outdated files... none found
> pickling environment... done
> checking consistency... done
> preparing documents... done
> writing output... [ 2%] Examples/Crane TP 410 Solved Problems/7.1 Smooth Pipe (Plastic)
> writing output... [ 4%] Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam
> writing output... [ 6%] Examples/Crane TP 410 Solved Problems/7.11 Flat heating Coils - Water
> writing output... [ 9%] Examples/Crane TP 410 Solved Problems/7.13 Flow given in English Units - Oil
> writing output... [ 11%] Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's Theorem-Water
> writing output... [ 13%] Examples/Crane TP 410 Solved Problems/7.2 L, L over D and K from Kv for Conventional Type Valves
> writing output... [ 16%] Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation
> writing output... [ 18%] Examples/Crane TP 410 Solved Problems/7.3 L, L over D, K, and Kv for Conventional Type Valves
> writing output... [ 20%] Examples/Crane TP 410 Solved Problems/7.4 Venturi Type Valves
> writing output... [ 23%] Examples/Crane TP 410 Solved Problems/7.5 Lift Check Valves
> writing output... [ 25%] Examples/Crane TP 410 Solved Problems/7.6 Reduced Port Ball Valve
> writing output... [ 27%] Examples/Crane TP 410 Solved Problems/7.7 Laminar flow in Valves, Fittings, and Pipe - System from Example 7.6
> writing output... [ 30%] Examples/Crane TP 410 Solved Problems/7.8 Laminar flow in Valves, Fittings, and Pipe - SAE oil through a pipe and globe valve
> writing output... [ 32%] examples
> writing output... [ 34%] fluids
> writing output... [ 37%] fluids.atmosphere
> writing output... [ 39%] fluids.compressible
> writing output... [ 41%] fluids.control_valve
> writing output... [ 44%] fluids.core
> writing output... [ 46%] fluids.drag
> writing output... [ 48%] fluids.filters
> writing output... [ 51%] fluids.fittings
> writing output... [ 53%] fluids.flow_meter
> writing output... [ 55%] fluids.friction
> writing output... [ 58%] fluids.geometry
> writing output... [ 60%] fluids.jet_pump
> writing output... [ 62%] fluids.mixing
> writing output... [ 65%] fluids.open_flow
> writing output... [ 67%] fluids.packed_bed
> writing output... [ 69%] fluids.packed_tower
> writing output... [ 72%] fluids.particle_size_distribution
> writing output... [ 74%] fluids.piping
> writing output... [ 76%] fluids.pump
> writing output... [ 79%] fluids.safety_valve
> writing output... [ 81%] fluids.saltation
> writing output... [ 83%] fluids.separator
> writing output... [ 86%] fluids.two_phase
> writing output... [ 88%] fluids.two_phase_voidage
> writing output... [ 90%] fluids.units
> writing output... [ 93%] fluids.vectorized
> writing output... [ 95%] index
> writing output... [ 97%] modules
> writing output... [100%] tutorial
>
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.1 Smooth Pipe (Plastic).ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.10 Piping Systems - Steam.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.11 Flat heating Coils - Water.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.11 Flat heating Coils - Water.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.13 Flow given in English Units - Oil.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.13 Flow given in English Units - Oil.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's Theorem-Water.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.14 Bernoulli's Theorem-Water.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.2 L, L over D and K from Kv for Conventional Type Valves.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.29 Orifice Flow Rate Calculation.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.3 L, L over D, K, and Kv for Conventional Type Valves.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.4 Venturi Type Valves.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.5 Lift Check Valves.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.6 Reduced Port Ball Valve.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.6 Reduced Port Ball Valve.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.7 Laminar flow in Valves, Fittings, and Pipe - System from Example 7.6.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/Examples/Crane TP 410 Solved Problems/7.8 Laminar flow in Valves, Fittings, and Pipe - SAE oil through a pipe and globe valve.ipynb:: WARNING: Pygments lexer name 'ipython2' is not known
> /<<PKGBUILDDIR>>/docs/tutorial.rst:357: WARNING: undefined label: <tank> (if the link has no caption the label must precede a section header)
> generating indices... genindex py-modindex done
> highlighting module code... [ 4%] fluids.atmosphere
> highlighting module code... [ 8%] fluids.compressible
> highlighting module code... [ 13%] fluids.control_valve
> highlighting module code... [ 17%] fluids.core
> highlighting module code... [ 21%] fluids.drag
> highlighting module code... [ 26%] fluids.filters
> highlighting module code... [ 30%] fluids.fittings
> highlighting module code... [ 34%] fluids.flow_meter
> highlighting module code... [ 39%] fluids.friction
> highlighting module code... [ 43%] fluids.geometry
> highlighting module code... [ 47%] fluids.jet_pump
> highlighting module code... [ 52%] fluids.mixing
> highlighting module code... [ 56%] fluids.open_flow
> highlighting module code... [ 60%] fluids.packed_bed
> highlighting module code... [ 65%] fluids.packed_tower
> highlighting module code... [ 69%] fluids.particle_size_distribution
> highlighting module code... [ 73%] fluids.piping
> highlighting module code... [ 78%] fluids.pump
> highlighting module code... [ 82%] fluids.safety_valve
> highlighting module code... [ 86%] fluids.saltation
> highlighting module code... [ 91%] fluids.separator
> highlighting module code... [ 95%] fluids.two_phase
> highlighting module code... [100%] fluids.two_phase_voidage
>
> writing additional pages... search done
> copying images... [ 4%] fittings/bend_miter.png
> copying images... [ 8%] ../build/html/plot_directive/plots/bend_miter.png
> copying images... [ 12%] fittings/bend_rounded.png
> copying images... [ 16%] ../build/html/plot_directive/plots/bend_rounded_Crane.png
> copying images... [ 20%] fittings/contraction_beveled.png
> copying images... [ 25%] fittings/contraction_conical.png
> copying images... [ 29%] ../build/html/plot_directive/plots/contraction_conical.png
> copying images... [ 33%] fittings/contraction_round.png
> copying images... [ 37%] ../build/html/plot_directive/plots/contraction_round.png
> copying images... [ 41%] fittings/contraction_sharp.png
> copying images... [ 45%] fittings/diffuser_conical.png
> copying images... [ 50%] ../build/html/plot_directive/plots/diffuser_conical.png
> copying images... [ 54%] fittings/curved_wall_diffuser.png
> copying images... [ 58%] fittings/entrance_mounted_at_an_angle.png
> copying images... [ 62%] fittings/flush_mounted_beveled_entrance.png
> copying images... [ 66%] ../build/html/plot_directive/plots/entrance_beveled.png
> copying images... [ 70%] fittings/flush_mounted_beveled_orifice_entrance.png
> copying images... [ 75%] fittings/sharp_edged_entrace_extended_mount.png
> copying images... [ 79%] ../build/html/plot_directive/plots/entrance_distance.png
> copying images... [ 83%] fittings/flush_mounted_rounded_entrance.png
> copying images... [ 87%] ../build/html/plot_directive/plots/entrance_rounded.png
> copying images... [ 91%] fittings/flush_mounted_sharp_edged_entrance.png
> copying images... [ 95%] fittings/flush_mounted_exit.png
> copying images... [100%] ../build/html/plot_directive/plots/ft_Crane.png
>
> copying static files... done
> copying extra files... done
> dumping search index in English (code: en)... done
> dumping object inventory... done
> build succeeded, 38 warnings.
>
> The HTML pages are in build/html.
> make[1]: Leaving directory '/<<PKGBUILDDIR>>'
> dh_auto_test -O--buildsystem=pybuild -O--test-pytest
> I: pybuild base:232: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build; python3.8 -m pytest -k-online -k-slow
> ============================= test session starts ==============================
> platform linux -- Python 3.8.6, pytest-4.6.11, py-1.9.0, pluggy-0.13.0
> rootdir: /<<PKGBUILDDIR>>, inifile: pytest.ini
> plugins: cov-2.8.1
> collected 460 items / 33 deselected / 427 selected
>
> tests/test_atmosphere.py ..ss.s. [ 1%]
> tests/test_compressible.py ................. [ 5%]
> tests/test_control_valve.py .......FF [ 7%]
> tests/test_core.py ............... [ 11%]
> tests/test_design_climate.py ..... [ 12%]
> tests/test_drag.py ..... [ 13%]
> tests/test_filters.py .. [ 14%]
> tests/test_fittings.py .................................... [ 22%]
> tests/test_fittings_fits.py .......... [ 24%]
> tests/test_flow_meter.py .................................. [ 32%]
> tests/test_friction.py ................................ [ 40%]
> tests/test_geometry.py .............. [ 43%]
> tests/test_jet_pump.py . [ 43%]
> tests/test_mixing.py . [ 44%]
> tests/test_numerics.py ................ [ 47%]
> tests/test_open_flow.py . [ 48%]
> tests/test_packed_bed.py .. [ 48%]
> tests/test_packed_tower.py ..... [ 49%]
> tests/test_particle_size_distribution.py ........................ [ 55%]
> tests/test_piping.py .. [ 55%]
> tests/test_pump.py ........... [ 58%]
> tests/test_safety_valve.py . [ 58%]
> tests/test_saltation.py ....... [ 60%]
> tests/test_separator.py ..... [ 61%]
> tests/test_two_phase.py ............................. [ 68%]
> tests/test_two_phase_voidage.py ...................................... [ 77%]
> tests/test_units.py ........ [ 78%]
> tests/test_vectorized.py . [ 79%]
> tests/spa/test_spa.py ...........................................sssssss [ 90%]
> sssssssssssssssssssssssssssssssssssssss [100%]
>
> =================================== FAILURES ===================================
> ___________________________ test_opening_quick_data ____________________________
>
> def test_opening_quick_data():
> from fluids.control_valve import opening_quick_tck, opening_quick, frac_CV_quick
> tck_recalc = splrep(opening_quick, frac_CV_quick, k=3, s=0)
> > [assert_allclose(i, j) for i, j in zip(opening_quick_tck, tck_recalc)]
>
> tests/test_control_valve.py:331:
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>
> .0 = <zip object at 0xffffb568fdc0>
>
> > [assert_allclose(i, j) for i, j in zip(opening_quick_tck, tck_recalc)]
> E AssertionError:
> E Not equal to tolerance rtol=1e-07, atol=0
> E
> E Mismatched elements: 1 / 33 (3.03%)
> E Max absolute difference: 4.4408921e-16
> E Max relative difference: 2.93815384
> E x: array([-3.247926e-19, 3.765096e-02, 5.461616e-02, 1.265786e-01,
> E 1.711511e-01, 2.075234e-01, 2.708406e-01, 3.420896e-01,
> E 3.873084e-01, 4.656002e-01, 5.196996e-01, 5.907033e-01,...
> E y: array([1.675783e-19, 3.765096e-02, 5.461616e-02, 1.265786e-01,
> E 1.711511e-01, 2.075234e-01, 2.708406e-01, 3.420896e-01,
> E 3.873084e-01, 4.656002e-01, 5.196996e-01, 5.907033e-01,...
>
> tests/test_control_valve.py:331: AssertionError
> ___________________________ test_opening_equal_data ____________________________
>
> def test_opening_equal_data():
> from fluids.control_valve import opening_equal, frac_CV_equal, opening_equal_tck
> tck_recalc = splrep(opening_equal, frac_CV_equal, k=3, s=0)
> > [assert_allclose(i, j) for i, j in zip(opening_equal_tck, tck_recalc)]
>
> tests/test_control_valve.py:336:
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>
> .0 = <zip object at 0xffffb5924f40>
>
> > [assert_allclose(i, j) for i, j in zip(opening_equal_tck, tck_recalc)]
> E AssertionError:
> E Not equal to tolerance rtol=1e-07, atol=0
> E
> E Mismatched elements: 1 / 29 (3.45%)
> E Max absolute difference: 6.66133815e-16
> E Max relative difference: 0.65800271
> E x: array([1.352259e-19, 4.087874e-03, 1.437415e-02, 1.645548e-02,
> E 2.494685e-02, 3.592972e-02, 4.071012e-02, 5.451847e-02,
> E 6.976905e-02, 7.587146e-02, 9.854858e-02, 1.238160e-01,...
> E y: array([8.155952e-20, 4.087874e-03, 1.437415e-02, 1.645548e-02,
> E 2.494685e-02, 3.592972e-02, 4.071012e-02, 5.451847e-02,
> E 6.976905e-02, 7.587146e-02, 9.854858e-02, 1.238160e-01,...
>
> tests/test_control_valve.py:336: AssertionError
> =============================== warnings summary ===============================
> fluids/optional/pychebfun.py:424
> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/optional/pychebfun.py:424: DeprecationWarning: invalid escape sequence \i
> """
>
> .pybuild/cpython3_3.8_fluids/build/tests/test_open_flow.py::test_open_flow
> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/tests/test_open_flow.py:69: VisibleDeprecationWarning: Creating an ndarray from ragged nested sequences (which is a list-or-tuple of lists-or-tuples-or ndarrays with different lengths or shapes) is deprecated. If you meant to do this, you must specify 'dtype=object' when creating the ndarray
> n_tot = np.sum(np.concatenate(np.array([list(val.values()) for thing in n_dicts for val in thing.values()])))
>
> .pybuild/cpython3_3.8_fluids/build/tests/test_units.py::test_sample_cases
> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build/fluids/units.py:202: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3, and in 3.9 it will stop working
> elif isinstance(result, collections.Iterable):
>
> -- Docs: https://docs.pytest.org/en/latest/warnings.html
> = 2 failed, 376 passed, 49 skipped, 33 deselected, 3 warnings in 3.30 seconds ==
> E: pybuild pybuild:353: test: plugin distutils failed with: exit code=1: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.8_fluids/build; python3.8 -m pytest -k-online -k-slow
> I: pybuild base:232: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build; python3.9 -m pytest -k-online -k-slow
> ============================= test session starts ==============================
> platform linux -- Python 3.9.1rc1, pytest-4.6.11, py-1.9.0, pluggy-0.13.0
> rootdir: /<<PKGBUILDDIR>>, inifile: pytest.ini
> plugins: cov-2.8.1
> collected 460 items / 33 deselected / 427 selected
>
> tests/test_atmosphere.py ..ss.s. [ 1%]
> tests/test_compressible.py ................. [ 5%]
> tests/test_control_valve.py .......FF [ 7%]
> tests/test_core.py ............... [ 11%]
> tests/test_design_climate.py ..... [ 12%]
> tests/test_drag.py ..... [ 13%]
> tests/test_filters.py .. [ 14%]
> tests/test_fittings.py .................................... [ 22%]
> tests/test_fittings_fits.py .......... [ 24%]
> tests/test_flow_meter.py .................................. [ 32%]
> tests/test_friction.py ................................ [ 40%]
> tests/test_geometry.py .............. [ 43%]
> tests/test_jet_pump.py . [ 43%]
> tests/test_mixing.py . [ 44%]
> tests/test_numerics.py ................ [ 47%]
> tests/test_open_flow.py . [ 48%]
> tests/test_packed_bed.py .. [ 48%]
> tests/test_packed_tower.py ..... [ 49%]
> tests/test_particle_size_distribution.py ........................ [ 55%]
> tests/test_piping.py .. [ 55%]
> tests/test_pump.py ........... [ 58%]
> tests/test_safety_valve.py . [ 58%]
> tests/test_saltation.py ....... [ 60%]
> tests/test_separator.py ..... [ 61%]
> tests/test_two_phase.py ............................. [ 68%]
> tests/test_two_phase_voidage.py ...................................... [ 77%]
> tests/test_units.py ........ [ 78%]
> tests/test_vectorized.py . [ 79%]
> tests/spa/test_spa.py ...........................................sssssss [ 90%]
> sssssssssssssssssssssssssssssssssssssss [100%]
>
> =================================== FAILURES ===================================
> ___________________________ test_opening_quick_data ____________________________
>
> def test_opening_quick_data():
> from fluids.control_valve import opening_quick_tck, opening_quick, frac_CV_quick
> tck_recalc = splrep(opening_quick, frac_CV_quick, k=3, s=0)
> > [assert_allclose(i, j) for i, j in zip(opening_quick_tck, tck_recalc)]
>
> tests/test_control_valve.py:331:
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>
> .0 = <zip object at 0xffff863b3fc0>
>
> > [assert_allclose(i, j) for i, j in zip(opening_quick_tck, tck_recalc)]
> E AssertionError:
> E Not equal to tolerance rtol=1e-07, atol=0
> E
> E Mismatched elements: 1 / 33 (3.03%)
> E Max absolute difference: 4.4408921e-16
> E Max relative difference: 2.93815384
> E x: array([-3.247926e-19, 3.765096e-02, 5.461616e-02, 1.265786e-01,
> E 1.711511e-01, 2.075234e-01, 2.708406e-01, 3.420896e-01,
> E 3.873084e-01, 4.656002e-01, 5.196996e-01, 5.907033e-01,...
> E y: array([1.675783e-19, 3.765096e-02, 5.461616e-02, 1.265786e-01,
> E 1.711511e-01, 2.075234e-01, 2.708406e-01, 3.420896e-01,
> E 3.873084e-01, 4.656002e-01, 5.196996e-01, 5.907033e-01,...
>
> tests/test_control_valve.py:331: AssertionError
> ___________________________ test_opening_equal_data ____________________________
>
> def test_opening_equal_data():
> from fluids.control_valve import opening_equal, frac_CV_equal, opening_equal_tck
> tck_recalc = splrep(opening_equal, frac_CV_equal, k=3, s=0)
> > [assert_allclose(i, j) for i, j in zip(opening_equal_tck, tck_recalc)]
>
> tests/test_control_valve.py:336:
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>
> .0 = <zip object at 0xffff8645b840>
>
> > [assert_allclose(i, j) for i, j in zip(opening_equal_tck, tck_recalc)]
> E AssertionError:
> E Not equal to tolerance rtol=1e-07, atol=0
> E
> E Mismatched elements: 1 / 29 (3.45%)
> E Max absolute difference: 6.66133815e-16
> E Max relative difference: 0.65800271
> E x: array([1.352259e-19, 4.087874e-03, 1.437415e-02, 1.645548e-02,
> E 2.494685e-02, 3.592972e-02, 4.071012e-02, 5.451847e-02,
> E 6.976905e-02, 7.587146e-02, 9.854858e-02, 1.238160e-01,...
> E y: array([8.155952e-20, 4.087874e-03, 1.437415e-02, 1.645548e-02,
> E 2.494685e-02, 3.592972e-02, 4.071012e-02, 5.451847e-02,
> E 6.976905e-02, 7.587146e-02, 9.854858e-02, 1.238160e-01,...
>
> tests/test_control_valve.py:336: AssertionError
> =============================== warnings summary ===============================
> fluids/optional/pychebfun.py:424
> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/optional/pychebfun.py:424: DeprecationWarning: invalid escape sequence \i
> """
>
> .pybuild/cpython3_3.9_fluids/build/tests/test_open_flow.py::test_open_flow
> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/tests/test_open_flow.py:69: VisibleDeprecationWarning: Creating an ndarray from ragged nested sequences (which is a list-or-tuple of lists-or-tuples-or ndarrays with different lengths or shapes) is deprecated. If you meant to do this, you must specify 'dtype=object' when creating the ndarray
> n_tot = np.sum(np.concatenate(np.array([list(val.values()) for thing in n_dicts for val in thing.values()])))
>
> .pybuild/cpython3_3.9_fluids/build/tests/test_units.py::test_sample_cases
> /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build/fluids/units.py:202: DeprecationWarning: Using or importing the ABCs from 'collections' instead of from 'collections.abc' is deprecated since Python 3.3, and in 3.10 it will stop working
> elif isinstance(result, collections.Iterable):
>
> -- Docs: https://docs.pytest.org/en/latest/warnings.html
> = 2 failed, 376 passed, 49 skipped, 33 deselected, 3 warnings in 3.25 seconds ==
> E: pybuild pybuild:353: test: plugin distutils failed with: exit code=1: cd /<<PKGBUILDDIR>>/.pybuild/cpython3_3.9_fluids/build; python3.9 -m pytest -k-online -k-slow
> dh_auto_test: error: pybuild --test --test-pytest -i python{version} -p "3.8 3.9" returned exit code 13
The full build log is available from:
http://qa-logs.debian.net/2020/12/05/python-fluids_0.1.78-1_unstable.log
A list of current common problems and possible solutions is available at
http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute!
If you reassign this bug to another package, please marking it as 'affects'-ing
this package. See https://www.debian.org/Bugs/server-control#affects
If you fail to reproduce this, please provide a build log and diff it with me
so that we can identify if something relevant changed in the meantime.
About the archive rebuild: The rebuild was done on EC2 VM instances from
Amazon Web Services, using a clean, minimal and up-to-date chroot. Every
failed build was retried once to eliminate random failures.
More information about the debian-science-maintainers
mailing list