Bug#955097: yade: FTBFS with Sphinx 2.4: latex error
Lucas Nussbaum
lucas at debian.org
Fri Mar 27 14:52:54 GMT 2020
Source: yade
Version: 2020.01a-6
Severity: important
Tags: ftbfs
User: python-modules-team at lists.alioth.debian.org
Usertags: sphinx2.4
Hi,
yade fails to build with Sphinx 2.4, currently available in
experimental.
Relevant part (hopefully):
> make[3]: Entering directory '/<<PKGBUILDDIR>>/debian/build'
> make[3]: Nothing to be done for 'preinstall'.
> make[3]: Leaving directory '/<<PKGBUILDDIR>>/debian/build'
> Install the project...
> /usr/bin/cmake -P cmake_install.cmake
> -- Install configuration: "None"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/bin/yade-batch
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/bin/yade
> CMake Error: failed to create symbolic link '/usr/bin/yade.py': permission denied
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/config.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/libVersions.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/__init__.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/DEM-PFV-check.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkAvoidSelfInteractionMask.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkBlockGen.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkCapillaryModels.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkClumpHopper.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkColliderConstantness.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkColliderCorrectness.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkDEM-PFVPressureInjection.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkGravity.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkJCFpm.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkLiquidMigration.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkList.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkLubrication.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkLubricationWithRoughness.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkMPI.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkPolyhedraCrush.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkPotentialBlocks.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkPotentialParticles.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkSaveLoadClumps.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkTestDummy.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkTestTriax.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkViscElEng.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkViscElPM.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkViscElPM2.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkWeight.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/checkWirePM.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/check_TwoPhaseFlowEngine_PressureInjection.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/gui/testGui.sh
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/gui/testGuiEmpty.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/gui/testGuiSimple.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/testGuiHelper.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/data/100spheres
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/data/WallStressesCheckTest
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/data/checkColider.txt
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/data/checkColliderCorrect.txt
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/data/checkJCFpm.spheres
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/data/checkTestTriax.spheres
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/data/joints.csv
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/share/doc/yade/img/yade-logo-note.png
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/boot.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/boot.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/libyade.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/libyade.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/_GLViewer.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/_GLViewer.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/Inspector.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/SerializableEditor.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/__init__.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/img_rc.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/ui_controller.py
> -- Up-to-date: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/_GLViewer.so
> -- Up-to-date: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/Inspector.py
> -- Up-to-date: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/SerializableEditor.py
> -- Up-to-date: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/__init__.py
> -- Up-to-date: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/img_rc.py
> -- Up-to-date: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/qt/ui_controller.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/gts/__init__.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/gts/pygts.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/gts/_gts.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/gts/_gts.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_extraDocs.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/bisectionDecomposition.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/bodiesHandling.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/coloring.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/deformableelementsutils.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/domaindecomposition.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/export.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/geom.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/gridpfacet.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/linterpolation.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/log.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/mpy.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/params.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/plot.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/polyhedra_utils.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/post2d.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/remote.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/runtime.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/system.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/timing.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/utils.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/ymport.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/pack.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/mtTkinter.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/__init__.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/clump.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/cohesive-chain.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/core.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/dummyTest.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/engines.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/libVersions.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/pbc.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/testColliderByGiulia.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/utilsModule.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/wrapper.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/performance/checkPerf.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/tests/checks/performance/performance.db
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/FEMxDEM/mpipool.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/FEMxDEM/msFEM2D.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/FEMxDEM/msFEM3D.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/FEMxDEM/msFEMup.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/FEMxDEM/saveGauss.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/FEMxDEM/simDEM.py
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_libVersions.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_libVersions.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_log.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_log.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/WeightedAverage2d.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/WeightedAverage2d.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_utils.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_utils.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_polyhedra_utils.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_polyhedra_utils.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_packPredicates.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_packPredicates.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_packSpheres.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_packSpheres.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_packObb.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_packObb.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/wrapper.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/wrapper.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> -- Installing: /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_customConverters.so
> -- Set runtime path of "/<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/_customConverters.so" to "/usr/lib/x86_64-linux-gnu/yade:/usr/lib/x86_64-linux-gnu/yade/py:/usr/lib/x86_64-linux-gnu/yade/py/yade/:/usr/lib/x86_64-linux-gnu/yade/py/yade/qt:/usr/lib/x86_64-linux-gnu/yade/py/gts:/usr/lib/x86_64-linux-gnu/openmpi/lib"
> make[2]: Leaving directory '/<<PKGBUILDDIR>>/debian/build'
> # generate manpages
> help2man /<<PKGBUILDDIR>>/debian/tmp/usr/bin/yade > yade.1
> help2man /<<PKGBUILDDIR>>/debian/tmp/usr/bin/yade-batch > yade-batch.1
> /<<PKGBUILDDIR>>/debian/tmp/usr/bin/yade --test
> Using python version: 3.8.2 (default, Feb 25 2020, 13:04:52)
> [GCC 9.2.1 20200220]
> testDummySomething (yade.tests.dummyTest.TestDummy) ... ok
> testDummySomethingElse (yade.tests.dummyTest.TestDummy) ... ok
> testMatrix3 (yade.TestEigenWrapper)
> Math: Matrix3 operations ... ok
> testQuaternion (yade.TestEigenWrapper)
> Math: Quaternion operations ... ok
> testVector2 (yade.TestEigenWrapper)
> Math: Vector2 operations ... ok
> testVector3 (yade.TestEigenWrapper)
> Math: Vector3 operations ... ok
> testClassCtors (yade.TestObjectInstantiation)
> Core: correct types are instantiated ... ok
> testDispatcherCtor (yade.TestObjectInstantiation)
> Core: dispatcher ctors with functors ... ok
> testHidden (yade.TestObjectInstantiation)
> Core: Attr::hidden ... ok
> testInteractionLoopCtor (yade.TestObjectInstantiation)
> Core: InteractionLoop special ctor ... ok
> testInvalidAttr (yade.TestObjectInstantiation)
> Core: invalid attribute access raises AttributeError ... ok
> testNoSave (yade.TestObjectInstantiation)
> Core: Attr::noSave ... ok
> testParallelEngineCtor (yade.TestObjectInstantiation)
> Core: ParallelEngine special ctor ... ok
> testRootDerivedCtors_attrs_few (yade.TestObjectInstantiation)
> Core: class ctor's attributes ... ok
> testTriggerPostLoad (yade.TestObjectInstantiation)
> Core: Attr::triggerPostLoad ... ok
> testWrongFunctorType (yade.TestObjectInstantiation)
> Core: dispatcher and functor type mismatch is detected ... ok
> testErase (yade.TestBodies)
> Bodies: erased bodies are None in python ... ok
> testErasedAndNewlyCreatedSphere (yade.TestBodies)
> Bodies: The bug is described in LP:1001194. If the new body was created after deletion of previous, it has no bounding box ... ok
> testErasedIterate (yade.TestBodies)
> Bodies: Iterator silently skips erased ones ... ok
> testIterate (yade.TestBodies)
> Bodies: Iteration ... ok
> testLen (yade.TestBodies)
> Bodies: len(O.bodies) ... ok
> testNegativeIndex (yade.TestBodies)
> Bodies: Negative index counts backwards (like python sequences). ... ok
> testSaveAllClasses (yade.TestIO)
> I/O: All classes can be saved and loaded with boost::serialization ... Entered the initialization functionEntered the initialization functionWARNING: cannot open files used for capillary law, all forces will be null. Instructions on how to download and install them is found here : https://yade-dem.org/wiki/CapillaryTriaxialTest.
> ok
> testEraseBodiesInInteraction (yade.TestInteractions) ... ok
> testDead (yade.TestLoop)
> Loop: dead engines are not run ... ok
> testEnginesModificationInsideLoop (yade.TestLoop)
> Loop: O.engines can be modified inside the loop transparently. ... ok
> testSubstepping (yade.TestLoop)
> Loop: substepping ... ok
> testMatchMakerCollisions (yade.TestMatchMaker) ... ok
> testMaterialReturnsState (yade.TestMaterialStateAssociativity)
> Material+State: CpmMat returns CpmState when asked for newAssocState ... ok
> testThrowsAtBadCombination (yade.TestMaterialStateAssociativity)
> Material+State: throws when body has material and state that don't work together. ... ok
> testThrowsAtNullState (yade.TestMaterialStateAssociativity)
> Material+State: throws when body has material but NULL state. ... ok
> testAccess (yade.TestMaterials)
> Material: find by index or label; KeyError raised for invalid label. ... ok
> testIterate (yade.TestMaterials)
> Material: iteration over O.materials ... ok
> testLen (yade.TestMaterials)
> Material: len(O.materials) ... ok
> testNegativeIndex (yade.TestMaterials)
> Material: negative index counts backwards. ... ok
> testShared (yade.TestMaterials)
> Material: shared_ptr's makes change in material immediate everywhere ... ok
> testSharedAfterReload (yade.TestMaterials)
> Material: shared_ptr's are preserved when saving/loading ... ok
> testDegenerate (yade.TestPBC)
> PBC: degenerate cell raises exception ... ok
> testHomotheticResizeVel (yade.TestPBC)
> PBC: homothetic cell deformation adjusts particle velocity ... ok
> testKineticEnergy (yade.TestPBC)
> PBC: utils.kineticEnergy considers only fluctuation velocity, not the velocity gradient ... ok
> testL3GeomIncidentVelocity (yade.TestPBC)
> PBC: L3Geom computes incident velocity correctly ... ok
> testScGeomIncidentVelocity (yade.TestPBC)
> PBC: ScGeom computes incident velocity correctly ... ok
> testSetBox (yade.TestPBC)
> PBC: setBox modifies hSize correctly ... ok
> testTrsfChange (yade.TestPBC)
> PBC: chaing trsf changes hSize0, but does not modify hSize ... ok
> testVelGrad (yade.TestPBC)
> PBC: velGrad changes hSize, accumulates in trsf ... ok
> testConsistency (yade.TestSimpleClump)
> Clump: ids and flags consistency ... ok
> testStaticProperties (yade.TestSimpleClump)
> Clump: mass, centroid, intertia ... ok
> testVelocity (yade.TestSimpleClump)
> Clump: velocities of member assigned by NewtonIntegrator ... ok
> testMotion (yade.tests.cohesive-chain.TestCohesiveChain)
> CohesiveChain: velocity/positions tested in transient dynamics and equilibrium state ... ok
> testKinematicEngines (yade.TestKinematicEngines)
> Engines: kinematic engines ... ok
> testLabels (yade.TestLabelsOfEngines) ... ok
> testUserCreatedInteraction (yade.TestUtils) ... ok
> testLibVersions (yade.tests.libVersions.TestLibVersions) ... cmake versions: {'cmake': [(3, 16, 3), '3.16.3'], 'compiler': [(9, 3, 0), '/usr/bin/c++ 9.3.0'], 'boost': [(1, 67, 0), '106700'], 'freeglut': [(2, 8, 1), '2.8.1'], 'python': [(3, 8, 2), '3.8.2'], 'eigen': [(3, 3, 7), '3.3.7'], 'vtk': [(6, 3, 0), '6.3.0'], 'suitesparse': [(5, 7, 1), '5.7.1'], 'mpi': [(3, 1, 0), '3.1'], 'ipython': [(7, 13, 0), '7.13.0'], 'sphinx': [(2, 4, 3), '2.4.3-final-0'], 'mpi4py': [(3, 0, 3), '3.0.3']}
> C++ versions: {'compiler': [(9, 3, 0), 'gcc 9.3.0'], 'boost': [(1, 67, 0), '1.67.0'], 'qt': [(5, 12, 5), '5.12.5'], 'gl': [(2019, 8, 5), '20190805'], 'qglviewer': [(2, 6, 3), '2.6.3'], 'python': [(3, 8, 2), '3.8.2'], 'eigen': [(3, 3, 7), '3.3.7'], 'sqlite': [(3, 31, 1), '3.31.1'], 'vtk': [(6, 3, 0), '6.3.0'], 'cgal': [(5, 0, 2), '5.0.2'], 'suitesparse': [(5, 7, 1), '5.7.1'], 'openblas': [(0, 0, 0), ' OpenBLAS 0.3.9 '], 'metis': [(5, 1, 0), '5.1.0'], 'mpi': [(4, 0, 2), 'ompi:4.0.2'], 'clp': []}
>
>
> Yade version : 2020.01a
> Yade features : BoostLog Odeint VTK OpenMP GTS GUI-Qt5 CGAL PFVFLOW PFVFLOW LINSOLV MPI TWOPHASEFLOW SPH FEMLIKE GL2PS LBMFLOW THERMAL PotentialParticles
> Yade config dir: ~/.yade
>
> Libraries used :
>
> +---------------+----------------------+--------------------+
> | library | cmake | C++ |
> +===============+======================+====================+
> | boost | 106700 | 1.67.0 |
> +---------------+----------------------+--------------------+
> | cgal | | 5.0.2 |
> +---------------+----------------------+--------------------+
> | cmake | 3.16.3 | |
> +---------------+----------------------+--------------------+
> | compiler | /usr/bin/c++ 9.3.0 | gcc 9.3.0 |
> +---------------+----------------------+--------------------+
> | eigen | 3.3.7 | 3.3.7 |
> +---------------+----------------------+--------------------+
> | freeglut | 2.8.1 | |
> +---------------+----------------------+--------------------+
> | gl | | 20190805 |
> +---------------+----------------------+--------------------+
> | ipython | 7.13.0 | |
> +---------------+----------------------+--------------------+
> | metis | | 5.1.0 |
> +---------------+----------------------+--------------------+
> | mpi | 3.1 | ompi:4.0.2 |
> +---------------+----------------------+--------------------+
> | mpi4py | 3.0.3 | |
> +---------------+----------------------+--------------------+
> | openblas | | OpenBLAS 0.3.9 |
> +---------------+----------------------+--------------------+
> | python | 3.8.2 | 3.8.2 |
> +---------------+----------------------+--------------------+
> | qglviewer | | 2.6.3 |
> +---------------+----------------------+--------------------+
> | qt | | 5.12.5 |
> +---------------+----------------------+--------------------+
> | sphinx | 2.4.3-final-0 | |
> +---------------+----------------------+--------------------+
> | sqlite | | 3.31.1 |
> +---------------+----------------------+--------------------+
> | suitesparse | 5.7.1 | 5.7.1 |
> +---------------+----------------------+--------------------+
> | vtk | 6.3.0 | 6.3.0 |
> +---------------+----------------------+--------------------+
>
> Linux version: Debian GNU/Linux bullseye/sid
>
>
> ```
> Yade version : 2020.01a
> Yade features : BoostLog Odeint VTK OpenMP GTS GUI-Qt5 CGAL PFVFLOW PFVFLOW LINSOLV MPI TWOPHASEFLOW SPH FEMLIKE GL2PS LBMFLOW THERMAL PotentialParticles
> Yade config dir: ~/.yade
> ```
>
> Libraries used :
>
> | library | cmake | C++ |
> | ------------- | -------------------- | ------------------ |
> | boost | 106700 | 1.67.0 |
> | cgal | | 5.0.2 |
> | cmake | 3.16.3 | |
> | compiler | /usr/bin/c++ 9.3.0 | gcc 9.3.0 |
> | eigen | 3.3.7 | 3.3.7 |
> | freeglut | 2.8.1 | |
> | gl | | 20190805 |
> | ipython | 7.13.0 | |
> | metis | | 5.1.0 |
> | mpi | 3.1 | ompi:4.0.2 |
> | mpi4py | 3.0.3 | |
> | openblas | | OpenBLAS 0.3.9 |
> | python | 3.8.2 | 3.8.2 |
> | qglviewer | | 2.6.3 |
> | qt | | 5.12.5 |
> | sphinx | 2.4.3-final-0 | |
> | sqlite | | 3.31.1 |
> | suitesparse | 5.7.1 | 5.7.1 |
> | vtk | 6.3.0 | 6.3.0 |
>
> Linux version: Debian GNU/Linux bullseye/sid
>
> compiler version reported by by cmake is [(9, 3, 0), '/usr/bin/c++ 9.3.0'] and by C++ is [(9, 3, 0), 'gcc 9.3.0']
> boost version reported by by cmake is [(1, 67, 0), '106700'] and by C++ is [(1, 67, 0), '1.67.0']
> python version reported by by cmake is [(3, 8, 2), '3.8.2'] and by C++ is [(3, 8, 2), '3.8.2']
> eigen version reported by by cmake is [(3, 3, 7), '3.3.7'] and by C++ is [(3, 3, 7), '3.3.7']
> vtk version reported by by cmake is [(6, 3, 0), '6.3.0'] and by C++ is [(6, 3, 0), '6.3.0']
> suitesparse version reported by by cmake is [(5, 7, 1), '5.7.1'] and by C++ is [(5, 7, 1), '5.7.1']
> mpi version reported by by cmake is [(3, 1, 0), '3.1'] and by C++ is [(4, 0, 2), 'ompi:4.0.2']
>
> [93m Warning: [0mmpi versions are different, CMAKE: (3, 1, 0) vs. C++: (4, 0, 2)
> Something suspicious is going on. Can you help with file py/libVersions.py.in?
> ok
> SpherePack_toSimulation (yade.pack)
> Doctest: yade.pack.SpherePack_toSimulation ... ok
> addAutoData (yade.plot)
> Doctest: yade.plot.addAutoData ... ok
> addData (yade.plot)
> Doctest: yade.plot.addData ... ok
> plot (yade.plot)
> Doctest: yade.plot.plot ... ok
> saveDataTxt (yade.plot)
> Doctest: yade.plot.saveDataTxt ... ok
> SpherePWaveTimeStep (yade.utils)
> Doctest: yade.utils.SpherePWaveTimeStep ... ok
> saveVars (yade.utils)
> Doctest: yade.utils.saveVars ... ok
> sphere (yade.utils)
> Doctest: yade.utils.sphere ... ok
> typedEngine (yade.utils)
> Doctest: yade.utils.typedEngine ... /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/gridpfacet.py:57: UserWarning: [1;31mchainedCylinder is deprecated and will be removed in the future, use GridConnection instead. See examples/grids/CohesiveGridConnectionSphere.py.[1;0m
> warnings.warn('\033[1;31mchainedCylinder is deprecated and will be removed in the future, use GridConnection instead. See examples/grids/CohesiveGridConnectionSphere.py.\033[1;0m',category=UserWarning)
> /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/plot.py:444: MatplotlibDeprecationWarning: The 'verts' parameter of scatter() is deprecated since Matplotlib 3.2 and will be removed two minor releases later. If any parameter follows 'verts', they should be pass as keyword, not positionally.
> scatter=pylab.scatter(scatterPt[0] if not math.isnan(scatterPt[0]) else 0,scatterPt[1] if not math.isnan(scatterPt[1]) else 0,s=scatterSize,color=line.get_color(),**scatterMarkerKw)
> ok
>
> ----------------------------------------------------------------------
> Ran 62 tests in 0.673s
>
> OK
> [92m*** ALL TESTS PASSED ***[0m
> /<<PKGBUILDDIR>>/debian/tmp/usr/bin/yade --check
> /<<PKGBUILDDIR>>/debian/tmp/usr/lib/x86_64-linux-gnu/yade/py/yade/plot.py:444: MatplotlibDeprecationWarning: The 'verts' parameter of scatter() is deprecated since Matplotlib 3.2 and will be removed two minor releases later. If any parameter follows 'verts', they should be pass as keyword, not positionally.
> scatter=pylab.scatter(scatterPt[0] if not math.isnan(scatterPt[0]) else 0,scatterPt[1] if not math.isnan(scatterPt[1]) else 0,s=scatterSize,color=line.get_color(),**scatterMarkerKw)
> Welcome to Yade 2020.01a
> Using python version: 3.8.2 (default, Feb 25 2020, 13:04:52)
> [GCC 9.2.1 20200220]
> ###################################
> running: check_TwoPhaseFlowEngine_PressureInjection.py
> File ./vtk moved into /tmp/tmpm4auvkiq/ directory
> File ./Test.txt moved into /tmp/tmpm4auvkiq/ directory
> Status: success
> ___________________________________
> ###################################
> running: checkViscElPM.py
> Status: success
> ___________________________________
> ###################################
> Skipping checkPolyhedraCrush.py, because it is in SkipScripts
> ###################################
> running: checkBlockGen.py
> skip BlockGen check, PotentialBlocks not available
> Status: success
> ___________________________________
> ###################################
> running: checkWirePM.py
> Status: success
> ___________________________________
> ###################################
> running: checkPotentialParticles.py
> Status: success
> ___________________________________
> ###################################
> running: checkViscElEng.py
> Precalculated en value 0.736356797441
> Obtained en value 0.736356797441
> Status: success
> ___________________________________
> ###################################
> running: DEM-PFV-check.py
> DEM-PFV: difference in permeability: 0.044067088852757945 vs. target 0.040399916554
> DEM-PFV: difference in final pressure: 615.0495882420628 vs. target 628.314160434
> DEM-PFV: difference in final deformation -0.002674645948106278 vs. target -0.00258113045083
> Status: success
> ___________________________________
> ###################################
> running: checkTestTriax.py
> File ./checkTest.yade moved into /tmp/tmp2wwpukw8/ directory
> File ./_Unloaded_380_3.spheres moved into /tmp/tmp2wwpukw8/ directory
> File ./_Unloaded_380_3.xml moved into /tmp/tmp2wwpukw8/ directory
> File ./WallStresses moved into /tmp/tmp2wwpukw8/ directory
> Status: success
> ___________________________________
> ###################################
> running: checkSaveLoadClumps.py
> Kinetic energy OK 1.170364E-09
> Kinetic energy OK 1.157228E-01
> Kinetic energy OK 1.157460E-01
> Kinetic energy OK 1.180728E-01
> Status: success
> ___________________________________
> ###################################
> running: checkClumpHopper.py
> Iter 10000: Total number of generated spheres 1448, removed particles 0, current particles 1448, kinEnergy 13755.3
> Iter 20000: Total number of generated spheres 2896, removed particles 98, current particles 2798, kinEnergy 32257.5
> Status: success
> ___________________________________
> ###################################
> running: checkDEM-PFVPressureInjection.py
> File ./vtk moved into /tmp/tmp3kh_8fp_/ directory
> File ./Test.txt moved into /tmp/tmp3kh_8fp_/ directory
> Status: success
> ___________________________________
> ###################################
> running: checkPotentialBlocks.py
> skip PotentialBlocks check, PotentialBlocks not available
> Status: success
> ___________________________________
> ###################################
> running: checkGravity.py
> Status: success
> ___________________________________
> ###################################
> running: checkColliderConstantness.py
> checkColliderConstantness for InsertionSortCollider
> Status: success
> ___________________________________
> ###################################
> running: checkTestDummy.py
> checkTest mechanism
> Status: success
> ___________________________________
> ###################################
> Skipping checkMPI.py, because it is in SkipScripts
> ###################################
> running: checkViscElPM2.py
> Status: success
> ___________________________________
> ###################################
> running: checkLubrication.py
> Status: success
> ___________________________________
> ###################################
> running: checkAvoidSelfInteractionMask.py
> testing collider.avoidSelfInteractionMask
> 0 bb br gg gr rr
> 1 bb br gr
> 2 br gg gr
> 3 br gr
> Status: success
> ___________________________________
> ###################################
> running: checkCapillaryModels.py
> Status: success
> ___________________________________
> ###################################
> running: checkLubricationWithRoughness.py
> Status: success
> ___________________________________
> ###################################
> Skipping checkList.py, because it is in SkipScripts
> ###################################
> Skipping checkJCFpm.py, because it is in SkipScripts
> ###################################
> running: checkLiquidMigration.py
> This checkLiquidMigration.py cannot be executed because LIQMIGRATION is disabled
> Status: success
> ___________________________________
> ###################################
> running: checkWeight.py
> Precalculated weight 756.093387
> Obtained weight 756.093387
> Status: success
> ___________________________________
> ###################################
> running: checkColliderCorrectness.py
> checkColliderCorrectness for InsertionSortCollider
> Status: success
> ___________________________________
> [92m*** ALL CHECKS PASSED ***[0m
> dh_numpy3
> #Generate docs
> cd /<<PKGBUILDDIR>>/doc/sphinx && PYTHONPATH=. /<<PKGBUILDDIR>>/debian/tmp/usr/bin/yade yadeSphinx.py html && PYTHONPATH=. /<<PKGBUILDDIR>>/debian/tmp/usr/bin/yade yadeSphinx.py latex && cd _build/latex && xelatex Yade.tex && xelatex Yade.tex && xelatex Yade.tex
> Welcome to Yade 2020.01a
> Using python version: 3.8.2 (default, Feb 25 2020, 13:04:52)
> [GCC 9.2.1 20200220]
> Warning: no X rendering available (see https://bbs.archlinux.org/viewtopic.php?id=13189)
> XMLRPC info provider on http://localhost:21000
> TCP python prompt on localhost:9000, auth cookie `ucesas'
> Running script yadeSphinx.py
> Running yadeSphinx.py with writer == html
> Welcome to Yade 2020.01a
> Using python version: 3.8.2 (default, Feb 25 2020, 13:04:52)
> [GCC 9.2.1 20200220]
> Warning: no X rendering available (see https://bbs.archlinux.org/viewtopic.php?id=13189)
> XMLRPC info provider on http://localhost:21000
> TCP python prompt on localhost:9000, auth cookie `suykac'
> Running script yadeSphinx.py
> Running yadeSphinx.py with writer == latex
> This is XeTeX, Version 3.14159265-2.6-0.999991 (TeX Live 2019/Debian) (preloaded format=xelatex)
> restricted \write18 enabled.
> entering extended mode
> ! I can't find file `Yade.tex'.
> <*> Yade.tex
>
> (Press Enter to retry, or Control-D to exit)
> Please type another input file name:
> ! Emergency stop.
> <*> Yade.tex
>
> No pages of output.
> Transcript written on texput.log.
> make[1]: *** [debian/rules:63: override_dh_auto_install] Error 1
The full build log is available from:
http://qa-logs.debian.net/2020/03/26/yade_2020.01a-6_unstable_sphinx243.log
Please see [1] for Sphinx changelog, which may give a hint of what changes in
Sphinx caused this error.
Also see [2] for the list of deprecated/removed APIs and possible alternatives
to them.
Sphinx 2.4 is going to be uploaded to unstable in a couple of weeks. When that
happens, the severity of this bug will be bumped to serious.
In case you have questions, please Cc sphinx at packages.debian.org on reply.
[1]: https://www.sphinx-doc.org/en/2.0/changes.html
[2]: https://www.sphinx-doc.org/en/2.0/extdev/deprecated.html#dev-deprecated-apis
A list of current common problems and possible solutions is available at
http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute!
About the archive rebuild: The rebuild was done on EC2 VM instances from
Amazon Web Services, using a clean, minimal and up-to-date chroot. Every
failed build was retried once to eliminate random failures.
More information about the debian-science-maintainers
mailing list