[Freedombox-discuss] help from open source community member watch videos

Oogway oogway at trulycanadian.net
Tue Jun 8 21:03:07 BST 2021


https://www.linkedin.com/in/david-germiquet-2a653313/

this is not phishing im nervous


Your Friendly Turtle, of Western Ontario
Oogway 

‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐

On Thursday, May 13th, 2021 at 10:39 PM, Sunil Mohan Adapa <sunil at medhas.org> wrote:

> On 13/05/21 9:31 am, Navi Singh wrote:
>
> > Hi Dear,
> >
> > Greetings!!
> >
> > Currently, I'm testing freedombox with my Raspberry pi 400, and first of
> >
> > all, I would like to explain about my freedombox setup.
> >
> > 1.  SD card with UEFI Firmware
> > 2.  USB type 3.0 with freedombox image
> > 3.  Ethernet Cable
> > 4.  LED with HDMI cable.
> >
> > the first time, it is being executed, but when I try to restart with
> >
> > both SD card and USB. its reaches to the grub recuse>
> >
> > *with Grub rescuse > * if I use ls, set root, set prefix etc it is being
> >
> > done successfully, but again when I tried to do *insmod normal *and
> >
> > normal, both are showing an error.
>
> You may be facing a bug in grub[1]. Before you reboot, please try
>
> installing 'shim-signed', 'shim-helpers-arm64-signed',
>
> 'shim-signed-common' and 'shim-unsigned' packages. If that does not
>
> work, please uninstall the grub* packages and re-install them. This
>
> worked for me.
>
> > So my question is that, how can I resolve the restart case, and how can
> >
> > I put UEFI firmware & freedombox USB in a single drive, because there is
> >
> > no response if I remove SD card.
>
> The SD contains the UEFI firmware in the format understood by Raspberry
>
> Pi. The USB drive contains EFI partition and the root partition. You can
>
> to combine them manually by copying the EFI and root partitions to SD
>
> card. It is likely to work without any further changes.
>
> On official images, we can't distribute the UEFI firmware due to be
>
> binaries it it and we are trying not to create a separate image for each
>
> of the single board computers.
>
> > http://deb.debian.org/debian/pool/main/p/python-colorama/python3-colorama_0.4.4-1_all.deb
> >
> > http://deb.debian.org/debian/pool/main/p/python-colorama/python3-colorama_0.4.4-1_all.deb
> >
> > Could not resolve 'debian.map.fastlydns.net
> >
> > http://debian.map.fastlydns.net' Cannot initiate the connection to
> >
> > deb.debian.org:80 http://deb.debian.org:80 (2a04:4e42:48::644). -
> >
> > connect (101: Network is unreachable) Could not connect to
> >
> > deb.debian.org:80 http://deb.debian.org:80 (199.232.46.132),
> >
> > connection timed out E: Failed to fetch
>
> If your FreedomBox is able to access network in general but not able to
>
> do install apps, then it could be a problem with IPv6 configuration in
>
> your network. Try setting IPv6 configuration to "Ignored" using
>
> FreedomBox interface, nmtui tool or nmcli too.
>
> Links:
>
> 1.  https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=984760
>
>     --
>
>     Sunil
>
> Freedombox-discuss mailing list
>
> Freedombox-discuss at alioth-lists.debian.net
>
> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/freedombox-discuss



More information about the Freedombox-discuss mailing list