[Nut-upsdev] Re: Hardware Compatibility list - HP R3000 XR ups

[Arnaud Quette]

Hi Matthijs,

> Arnaud.
>After some trial and error, i found out that the HP R3000 XR ups's we have
>can be used with Network Ups Tools.
>This using the bcmxcp driver.
>
>Note that in the code of this driver (line 1420) , the Baudrate is fixed to
>9600 baud.
>to connect to a serial HP R3000 XR ups one needs to change this to 19200
>baud.
>
>ideally, this should be an config option/autodetect. As i have not the
>time/knowledge to make it so,
>and as we only have the HP R3000 XR ups's here, i will leave it just to
>change the setting in the sourcecode.

@Kjell: can you have a look at it, and produce a patch for autodetecting (or
having a baudrate param) + adding the HP R3000 XR model to the compat list?

thanks for your contribution,
Arnaud
--
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer -
http://people.debian.org/~aquette/<http://people.debian.org/%7Eaquette/>
OpenSource Developer - http://arnaud.quette.free.fr/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20050928/c91b823b/attachment.htm