[Nut-upsdev] Re: RE nut 2.0 fentonups and Xanto S3000R

[Carlos Rodrigues]

On 4/30/06, Henning Brauer <henning at openbsd.org> wrote:
> well, it is running 2.0.0 and the fentonups driver with my changes.

Yes, but the fentonups driver is going away. My point was to check
if/what is needed for megatec to report correct values for that model
(since powermust uses the same calculations, powermust's output can be
used instead).

> <brahe at paploo>  $ upsc UPS-3 at localhost
> battery.charge: 100.0
> battery.voltage: 2.26
> driver.name: fentonups
> driver.parameter.model: XS3000R
> driver.parameter.port: /dev/ttym1
> driver.version: 2.0.0
> driver.version.internal: 1.21
> input.frequency: 49.9
> input.transfer.high: 275
> input.transfer.low: 165
> input.voltage: 230.0
> output.voltage: 230.0
> ups.load: 053
> ups.mfr: Online
> ups.model: Xanto S3000R
> ups.status: OL
> ups.temperature: 27.0
>


--
Carlos Rodrigues