[Nut-upsdev] new ups for database?
Peter Selinger
selinger at mathstat.dal.ca
Sat Sep 23 20:51:35 UTC 2006
spamwhole at gmail.com wrote:
>
> Hi,
>
> Thanks for the very very quick patch. But, I can't seem to get things to
> work, unfortunately I'm not sure if the error is user induced ;-). I get
> the following error:
>
> ups # upsd
> Network UPS Tools upsd 2.1.0
> /var/state/ups is world readable
> /usr/local/ups/etc/upsd.conf is world readable
> Can't connect to UPS [belkin] (belkin): No such file or directory
> /usr/local/ups/etc/upsd.users is world readable
> Synchronizing.................. giving up
This is probably a permissions problem. Try running upsd with "-u
root".
Also make sure that upsd and newhidups are from the same NUT version.
> Here's my ups.conf:
>
> [belkin]
> port = /dev/usb/hiddev0 I've tried auto
> driver = newhidups
> vendorid = 0001
The "port" value is ignored; it can be any non-empty string.
> Here's an strace of 'upsd':
>
> [snip]
>
> Also, as a side note the make fell over when building the driver. There was
> a normal 'gcc' line but with no source code to compile. When I added
> mec-hid.c I I was able to continue/finish the compile.
You could have also done "make depend" in drivers/.
-- Peter
> thanks
>
> Rob
>
>
> Peter Selinger writes:
>
> > Thanks for the info. Attached is the patch for an MEC subdriver stub.
> > Plesae see if you can get this to work and read any info from the
> > device via "upsd" and "upsc". Thanks, -- Peter
> >
> > spamwhole at gmail.com wrote:
> >>
> >> Peter,
> >>
> >> Please see below. I've left the extra USB devices in there too, just in
> >> case.
> >>
> >> thanks
> >>
> >> Rob
> >>
> >> rmk drivers # ./newhidups -DD -u root -x generic -x vendorid=0001 auto
> >> Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0)
> >>
> >> debug level is '2'
> >> Checking device (0000/0000) (003/001)
> >> - VendorID: 0000
> >> - ProductID: 0000
> >> - Manufacturer: Linux 2.6.18-1 ohci_hcd
> >> - Product: OHCI Host Controller
> >> - Serial Number: 0000:00:02.0
> >> - Bus: 003
> >> Trying to match device
> >> Device does not match - skipping
> >> Checking device (14AA/022B) (002/011)
> >> - VendorID: 14aa
> >> - ProductID: 022b
> >> - Manufacturer: Digital TV Receiver
> >> - Product: Digital TV Receiver
> >> - Serial Number: unknown
> >> - Bus: 002
> >> Trying to match device
> >> Device does not match - skipping
> >> Checking device (0000/0000) (002/001)
> >> - VendorID: 0000
> >> - ProductID: 0000
> >> - Manufacturer: Linux 2.6.18-1 ehci_hcd
> >> - Product: EHCI Host Controller
> >> - Serial Number: 0000:05:06.2
> >> - Bus: 002
> >> Trying to match device
> >> Device does not match - skipping
> >> Checking device (0000/0000) (004/001)
> >> - VendorID: 0000
> >> - ProductID: 0000
> >> - Manufacturer: Linux 2.6.18-1 uhci_hcd
> >> - Product: UHCI Host Controller
> >> - Serial Number: 0000:05:06.0
> >> - Bus: 004
> >> Trying to match device
> >> Device does not match - skipping
> >> Checking device (0D3D/0001) (004/002)
> >> - VendorID: 0d3d
> >> - ProductID: 0001
> >> - Manufacturer: unknown
> >> - Product: USBPS2
> >> - Serial Number: unknown
> >> - Bus: 004
> >> Trying to match device
> >> Device does not match - skipping
> >> Checking device (0000/0000) (001/001)
> >> - VendorID: 0000
> >> - ProductID: 0000
> >> - Manufacturer: Linux 2.6.18-1 ehci_hcd
> >> - Product: EHCI Host Controller
> >> - Serial Number: 0000:00:02.1
> >> - Bus: 001
> >> Trying to match device
> >> Device does not match - skipping
> >> Checking device (0001/0000) (005/004)
> >> - VendorID: 0001
> >> - ProductID: 0000
> >> - Manufacturer: MEC
> >> - Product: MEC0002
> >> - Serial Number: unknown
> >> - Bus: 005
> >> Trying to match device
> >> Device matches
> >> failed to claim USB device, trying 2 more time(s)...
> >> detaching kernel driver from USB device...
> >> trying again to claim USB device...
> >> HID descriptor retrieved (Reportlen = 624)
> >> Report descriptor retrieved (Reportlen = 624)
> >> Found HID device
> >> Report Descriptor size = 624
> >> Detected a UPS: MEC/MEC0002
> >> Using subdriver: GENERIC HID 0.1
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.FlowID, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.ConfigVoltage, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.ConfigFrequency, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.LowVoltageTransfer, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.HighVoltageTransfer, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.iManufacturer, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.iProduct, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.iSerialNumber, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.FlowID, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.ConfigVoltage, Type: Feature
> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> Path: 00860004.Flow.ConfigFrequency, Type: Feature
> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> Path: 00860004.Flow.ConfigApparentPower, Type: Feature
> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> Path: 00860004.Flow.ConfigActivePower, Type: Feature
> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> Path: 00860004.Flow.DelayBeforeStartup, Type: Feature
> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> Path: 00860004.Flow.DelayBeforeShutdown, Type: Feature
> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> Path: 00860004.BatterySystem.BatterySystemID, Type: Feature
> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> Path: 00860004.BatterySystem.PresentStatus.Used, Type: Feature
> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> Path: 00860004.BatterySystem.PresentStatus.Good, Type: Feature
> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> Path: 00860004.BatterySystem.Voltage, Type: Feature
> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> Path: 00860004.BatterySystem.Temperature, Type: Feature
> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> Path: 00860004.BatterySystem.Test, Type: Input
> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> Path: 00860004.BatterySystem.Test, Type: Feature
> >> Can't find object 00860004.PowerConverter.PowerConverterID
> >> Path: 00860004.PowerConverter.PowerConverterID, Type: Input
> >> Can't find object 00860004.PowerConverter.Input.InputID
> >> Path: 00860004.PowerConverter.Input.InputID, Type: Input
> >> Can't find object 00860004.PowerConverter.Input.FlowID
> >> Path: 00860004.PowerConverter.Input.FlowID, Type: Input
> >> Can't find object 00860004.PowerConverter.Input.PresentStatus.Good
> >> Path: 00860004.PowerConverter.Input.PresentStatus.Good, Type: Input
> >> Can't find object 00860004.PowerConverter.Input.Voltage
> >> Path: 00860004.PowerConverter.Input.Voltage, Type: Input
> >> Can't find object 00860004.PowerConverter.Input.Frequency
> >> Path: 00860004.PowerConverter.Input.Frequency, Type: Input
> >> Can't find object 00860004.PowerConverter.Output.OutputID
> >> Path: 00860004.PowerConverter.Output.OutputID, Type: Input
> >> Can't find object 00860004.PowerConverter.Output.FlowID
> >> Path: 00860004.PowerConverter.Output.FlowID, Type: Input
> >> Can't find object 00860004.PowerConverter.Output.Voltage
> >> Path: 00860004.PowerConverter.Output.Voltage, Type: Input
> >> Can't find object 00860004.PowerConverter.Output.Frequency
> >> Path: 00860004.PowerConverter.Output.Frequency, Type: Input
> >> Can't find object 00860004.PowerConverter.Output.PercentLoad
> >> Path: 00860004.PowerConverter.Output.PercentLoad, Type: Input
> >> Can't find object 00860004.PowerConverter.Output.PresentStatus.Overload
> >> Path: 00860004.PowerConverter.Output.PresentStatus.Overload, Type: Input
> >> Can't find object 00860004.PowerConverter.Output.PresentStatus.Boost
> >> Path: 00860004.PowerConverter.Output.PresentStatus.Boost, Type: Input
> >> Can't find object 00860004.PowerConverter.Output.PresentStatus.Buck
> >> Path: 00860004.PowerConverter.Output.PresentStatus.Buck, Type: Input
> >> upsdrv_updateinfo...
> >> dstate_init: sock /var/state/ups/newhidups-auto open on fd 5
> >> upsdrv_updateinfo...
> >> Waiting for notifications...
> >> upsdrv_updateinfo...
> >> Waiting for notifications...
> >> Signal 2: exiting
> >> Closing device
> >> rmk drivers #
> >>
> >>
> >> Peter Selinger writes:
> >>
> >> > Rob and Dave,
> >> >
> >> > that device looks like it is using an illegal vendor id, "0001". It
> >> > also looks like it is made by MEC, not Belkin (probably sold under
> >> > license).
> >> >
> >> > We might be able to support its USB interface. To find out more,
> >> > please do the following:
> >> >
> >> > * get the latest development version of NUT from SVN. You can follow
> >> > the instructions at http://www.networkupstools.org/source.html under
> >> > "Development tree" to get it.
> >> >
> >> > * post the output of
> >> >
> >> > drivers/newhidups -DD -u root -x generic -x vendorid=0001 auto
> >> >
> >> > from this newest NUT version.
> >> >
> >> > This should output a bunch of debugging data, and then go into an
> >> > infinite loop waiting for data. You can do "Ctrl-C" to kill the driver
> >> > (it will not do anything useful at this point).
> >> >
> >> > -- Peter
> >> >
> >> > spamwhole at gmail.com wrote:
> >> >>
> >> >> Hi,
> >> >>
> >> >> I have the same device, a F6H500ukUNV, it has both RS-232 and USB.
> >> >>
> >> >> url:
> >> >> http://catalog.belkin.com/IWCatProductPage.process?Product_Id=201050
> >> >>
> >> >>
> >> >> The details I have from my system are below. If you would like further
> >> >> informatinon, or a more verbose lsusb please let me know.
> >> >>
> >> >> thanks
> >> >>
> >> >> Rob
> >> >>
> >> >> dmesg:
> >> >> hiddev96: USB HID v1.00 Device [MEC MEC0002] on usb-0000:05:06.1-2
> >> >>
> >> >> lsusb:
> >> >> Bus 005 Device 004: ID 0001:0000 Fry's Electronics
> >> >>
> >> >> cat /proc/bus/usb/device:
> >> >> T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=1.5 MxCh= 0
> >> >> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> >> >> P: Vendor=0001 ProdID=0000 Rev= 1.00
> >> >> S: Manufacturer=MEC
> >> >> S: Product=MEC0002
> >> >> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> >> >> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
> >> >> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
> >> >>
> >> >> >
> >> >> >Hi Dave,
> >> >> >
> >> >> >nothing in the outputs you sent looks like any Belkin device is
> >> >> >present. Are you sure it is attached to your computer? You should have
> >> >> >something like this in /proc/bus/usb/devices:
> >> >> >
> >> >> >T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
> >> >> >D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> >> >> >P: Vendor=050d ProdID=0980 Rev= 0.06
> >> >> >S: Manufacturer=
> >> >> >S: Product=UPS
> >> >> >C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA
> >> >> >I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
> >> >> >E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=248ms
> >> >> >
> >> >> >Note "Vendor=050d", which is Belkin's vendor ID.
> >> >> >
> >> >> >The output from newhidups does not show a 050d/XXXX device either.
> >> >> >
> >> >> >-- Peter
> >> >> >
> >> >> >meherenow at darkglobe.org wrote:
> >> >> >>
> >> >> >> I have a Belkin F6H500ukUNV ups that I am attempting to get working =20
> >> >> >> under nut, however it
> >> >> >> does not appear to be detected by nut, I'm assuming that I need to =20
> >> >> >> feed some information
> >> >> >> back to you guys to get it included in the database somwhere.
> >> >> >>
> >> >> >> I've included (what I can think might be) the relivant outputs. Please >=20
> >> >> >> let me know if you
> >> >> >> require anything else.
> >> >> >>
> >> >> >> dmesg output
> >> >> >> /sbin/newhidsups output
> >> >> >> ll /dev/usb*
> >> >> >> cat /proc/bus/usb/devices
> >> >> >>
> >> >> >> p.s. I tried chmodding /dev/usb<blah> 777 just incase it was a =20
> >> >> >> permissions problem, but
> >> >> >> that didn't help either.
> >> >> >>
> >> >> >> Many thanks.
> >> >> >>
> >> >> >> ###########################################################
> >> >> >> dmesg output when connecting the ups
> >> >> >>
> >> >> >> usb 2-1: new low speed USB device using uhci_hcd and address 2
> >> >> >> PM: Adding info for usb:2-1
> >> >> >> PM: Adding info for No Bus:usbdev2.2_ep00
> >> >> >> usb 2-1: configuration #1 chosen from 1 choice
> >> >> >> PM: Adding info for usb:2-1:1.0
> >> >> >> hiddev96: USB HID v1.00 Device [MEC MEC0002] on usb-0000:00:10.1-1
> >> >> >> PM: Adding info for No Bus:usbdev2.2_ep81
> >> >>
> >> >> _______________________________________________
> >> >> Nut-upsdev mailing list
> >> >> Nut-upsdev at lists.alioth.debian.org
> >> >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
> >> >>
> >> >
> >>
> >
>
More information about the Nut-upsdev
mailing list