[Nut-upsdev] new ups for database?

Peter Selinger selinger at mathstat.dal.ca
Sat Sep 23 22:52:51 UTC 2006


P.S. you may have to start the driver with "-a belkin" or "belkin"
instead of "auto", or start the driver with "upsdrvctl", to make sure
that the socket is named correctly. -- Peter

spamwhole at gmail.com wrote:
> 
> Hi, 
> 
> I've checked all the permissions and they are all ok for root & nobody.  
> I've even tried compiling it --with-user=root, but that doesn't make much 
> different.  Running an strace on it doesn't bring up anything useful either. 
> 
> I've tried running it as root and using -u root. But I still get the same 
> problem. I'm not sure if the 'Can't connect to UPS [belkin]' is the program 
> trying to connect to a socket of some description, or if it's actually 
> trying to connect to the UPS. 
> 
> thanks 
> 
> Rob 
> 
> rmk trunk # upsd -DD -u root
> Network UPS Tools upsd 2.1.0
> Can't connect to UPS [belkin] (belkin): No such file or directory
> Synchronizing.................. giving up 
> 
> rmk trunk # strace upsd -DD -u root
> munmap(0x2b0d2b273000, 4096)            = 0
> socket(PF_FILE, SOCK_STREAM, 0)         = 5
> connect(5, {sa_family=AF_FILE, path="newhidups"}, 110) = -1 ENOENT (No such 
> file or directory)
> close(5)                                = 0
> write(2, "Can\'t connect to UPS [newhidups]"..., 72Can't connect to UPS 
> [newhidups] (newhidups): No such file or directory 
> 
> 
> Peter Selinger writes: 
> 
> > spamwhole at gmail.com wrote:
> >> 
> >> Hi,  
> >> 
> >> Thanks for the very very quick patch. But, I can't seem to get things to 
> >> work, unfortunately I'm not sure if the error is user induced ;-).  I get 
> >> the following error:  
> >> 
> >> ups # upsd
> >> Network UPS Tools upsd 2.1.0
> >> /var/state/ups is world readable
> >> /usr/local/ups/etc/upsd.conf is world readable
> >> Can't connect to UPS [belkin] (belkin): No such file or directory
> >> /usr/local/ups/etc/upsd.users is world readable
> >> Synchronizing.................. giving up 
> > 
> > This is probably a permissions problem. Try running upsd with "-u
> > root".  
> > 
> > Also make sure that upsd and newhidups are from the same NUT version.  
> > 
> >> Here's my ups.conf:  
> >> 
> >> [belkin]
> >> port = /dev/usb/hiddev0             I've tried auto
> >> driver = newhidups
> >> vendorid = 0001 
> > 
> > The "port" value is ignored; it can be any non-empty string. 
> > 
> >> Here's an strace of 'upsd':  
> >> 
> >> [snip] 
> >> 
> >> Also, as a side note the make fell over when building the driver.  There was 
> >> a normal 'gcc' line but with no source code to compile.  When I added 
> >> mec-hid.c I I was able to continue/finish the compile. 
> > 
> > You could have also done "make depend" in drivers/. 
> > 
> > -- Peter 
> > 
> >> thanks  
> >> 
> >> Rob  
> >> 
> >> 
> >> Peter Selinger writes:  
> >> 
> >> > Thanks for the info. Attached is the patch for an MEC subdriver stub.
> >> > Plesae see if you can get this to work and read any info from the
> >> > device via "upsd" and "upsc". Thanks, -- Peter 
> >> > 
> >> > spamwhole at gmail.com wrote:
> >> >> 
> >> >> Peter,  
> >> >> 
> >> >> Please see below.  I've left the extra USB devices in there too, just in 
> >> >> case.  
> >> >> 
> >> >> thanks  
> >> >> 
> >> >> Rob  
> >> >> 
> >> >> rmk drivers # ./newhidups -DD -u root -x generic -x vendorid=0001 auto
> >> >> Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.1.0)  
> >> >> 
> >> >> debug level is '2'
> >> >> Checking device (0000/0000) (003/001)
> >> >>  - VendorID: 0000
> >> >>  - ProductID: 0000
> >> >>  - Manufacturer: Linux 2.6.18-1 ohci_hcd
> >> >>  - Product: OHCI Host Controller
> >> >>  - Serial Number: 0000:00:02.0
> >> >>  - Bus: 003
> >> >> Trying to match device
> >> >> Device does not match - skipping
> >> >> Checking device (14AA/022B) (002/011)
> >> >>  - VendorID: 14aa
> >> >>  - ProductID: 022b
> >> >>  - Manufacturer: Digital TV Receiver
> >> >>  - Product: Digital TV Receiver
> >> >>  - Serial Number: unknown
> >> >>  - Bus: 002
> >> >> Trying to match device
> >> >> Device does not match - skipping
> >> >> Checking device (0000/0000) (002/001)
> >> >>  - VendorID: 0000
> >> >>  - ProductID: 0000
> >> >>  - Manufacturer: Linux 2.6.18-1 ehci_hcd
> >> >>  - Product: EHCI Host Controller
> >> >>  - Serial Number: 0000:05:06.2
> >> >>  - Bus: 002
> >> >> Trying to match device
> >> >> Device does not match - skipping
> >> >> Checking device (0000/0000) (004/001)
> >> >>  - VendorID: 0000
> >> >>  - ProductID: 0000
> >> >>  - Manufacturer: Linux 2.6.18-1 uhci_hcd
> >> >>  - Product: UHCI Host Controller
> >> >>  - Serial Number: 0000:05:06.0
> >> >>  - Bus: 004
> >> >> Trying to match device
> >> >> Device does not match - skipping
> >> >> Checking device (0D3D/0001) (004/002)
> >> >>  - VendorID: 0d3d
> >> >>  - ProductID: 0001
> >> >>  - Manufacturer: unknown
> >> >>  - Product: USBPS2
> >> >>  - Serial Number: unknown
> >> >>  - Bus: 004
> >> >> Trying to match device
> >> >> Device does not match - skipping
> >> >> Checking device (0000/0000) (001/001)
> >> >>  - VendorID: 0000
> >> >>  - ProductID: 0000
> >> >>  - Manufacturer: Linux 2.6.18-1 ehci_hcd
> >> >>  - Product: EHCI Host Controller
> >> >>  - Serial Number: 0000:00:02.1
> >> >>  - Bus: 001
> >> >> Trying to match device
> >> >> Device does not match - skipping
> >> >> Checking device (0001/0000) (005/004)
> >> >>  - VendorID: 0001
> >> >>  - ProductID: 0000
> >> >>  - Manufacturer: MEC
> >> >>  - Product: MEC0002
> >> >>  - Serial Number: unknown
> >> >>  - Bus: 005
> >> >> Trying to match device
> >> >> Device matches
> >> >> failed to claim USB device, trying 2 more time(s)...
> >> >> detaching kernel driver from USB device...
> >> >> trying again to claim USB device...
> >> >> HID descriptor retrieved (Reportlen = 624)
> >> >> Report descriptor retrieved (Reportlen = 624)
> >> >> Found HID device
> >> >> Report Descriptor size = 624
> >> >> Detected a UPS: MEC/MEC0002
> >> >> Using subdriver: GENERIC HID 0.1
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.FlowID, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.ConfigVoltage, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.ConfigFrequency, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.LowVoltageTransfer, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.HighVoltageTransfer, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.iManufacturer, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.iProduct, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.iSerialNumber, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.FlowID, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.ConfigVoltage, Type: Feature
> >> >> Can't retrieve Report 1 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.ConfigFrequency, Type: Feature
> >> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.ConfigApparentPower, Type: Feature
> >> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.ConfigActivePower, Type: Feature
> >> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.DelayBeforeStartup, Type: Feature
> >> >> Can't retrieve Report 2 (-32/32): Broken pipe
> >> >> Path: 00860004.Flow.DelayBeforeShutdown, Type: Feature
> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> Path: 00860004.BatterySystem.BatterySystemID, Type: Feature
> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> Path: 00860004.BatterySystem.PresentStatus.Used, Type: Feature
> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> Path: 00860004.BatterySystem.PresentStatus.Good, Type: Feature
> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> Path: 00860004.BatterySystem.Voltage, Type: Feature
> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> Path: 00860004.BatterySystem.Temperature, Type: Feature
> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> Path: 00860004.BatterySystem.Test, Type: Input
> >> >> Can't retrieve Report 3 (-32/32): Broken pipe
> >> >> Path: 00860004.BatterySystem.Test, Type: Feature
> >> >> Can't find object 00860004.PowerConverter.PowerConverterID
> >> >> Path: 00860004.PowerConverter.PowerConverterID, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Input.InputID
> >> >> Path: 00860004.PowerConverter.Input.InputID, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Input.FlowID
> >> >> Path: 00860004.PowerConverter.Input.FlowID, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Input.PresentStatus.Good
> >> >> Path: 00860004.PowerConverter.Input.PresentStatus.Good, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Input.Voltage
> >> >> Path: 00860004.PowerConverter.Input.Voltage, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Input.Frequency
> >> >> Path: 00860004.PowerConverter.Input.Frequency, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Output.OutputID
> >> >> Path: 00860004.PowerConverter.Output.OutputID, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Output.FlowID
> >> >> Path: 00860004.PowerConverter.Output.FlowID, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Output.Voltage
> >> >> Path: 00860004.PowerConverter.Output.Voltage, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Output.Frequency
> >> >> Path: 00860004.PowerConverter.Output.Frequency, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Output.PercentLoad
> >> >> Path: 00860004.PowerConverter.Output.PercentLoad, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Output.PresentStatus.Overload
> >> >> Path: 00860004.PowerConverter.Output.PresentStatus.Overload, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Output.PresentStatus.Boost
> >> >> Path: 00860004.PowerConverter.Output.PresentStatus.Boost, Type: Input
> >> >> Can't find object 00860004.PowerConverter.Output.PresentStatus.Buck
> >> >> Path: 00860004.PowerConverter.Output.PresentStatus.Buck, Type: Input
> >> >> upsdrv_updateinfo...
> >> >> dstate_init: sock /var/state/ups/newhidups-auto open on fd 5
> >> >> upsdrv_updateinfo...
> >> >> Waiting for notifications...
> >> >> upsdrv_updateinfo...
> >> >> Waiting for notifications...
> >> >> Signal 2: exiting
> >> >> Closing device
> >> >> rmk drivers #  
> >> >> 
> >> >> 
> >> >> Peter Selinger writes:  
> >> >> 
> >> >> > Rob and Dave, 
> >> >> > 
> >> >> > that device looks like it is using an illegal vendor id, "0001". It
> >> >> > also looks like it is made by MEC, not Belkin (probably sold under
> >> >> > license).  
> >> >> > 
> >> >> > We might be able to support its USB interface. To find out more,
> >> >> > please do the following: 
> >> >> > 
> >> >> > * get the latest development version of NUT from SVN. You can follow
> >> >> >   the instructions at http://www.networkupstools.org/source.html under
> >> >> >   "Development tree" to get it. 
> >> >> > 
> >> >> > * post the output of 
> >> >> > 
> >> >> >    drivers/newhidups -DD -u root -x generic -x vendorid=0001 auto 
> >> >> > 
> >> >> >   from this newest NUT version. 
> >> >> > 
> >> >> > This should output a bunch of debugging data, and then go into an
> >> >> > infinite loop waiting for data. You can do "Ctrl-C" to kill the driver
> >> >> > (it will not do anything useful at this point). 
> >> >> > 
> >> >> > -- Peter 
> >> >> > 
> >> >> > spamwhole at gmail.com wrote:
> >> >> >> 
> >> >> >> Hi,  
> >> >> >> 
> >> >> >> I have the same device, a F6H500ukUNV, it has both RS-232 and USB.  
> >> >> >> 
> >> >> >> url:
> >> >> >> http://catalog.belkin.com/IWCatProductPage.process?Product_Id=201050  
> >> >> >> 
> >> >> >> 
> >> >> >> The details I have from my system are below.  If you would like further 
> >> >> >> informatinon, or a more verbose lsusb please let me know.  
> >> >> >> 
> >> >> >> thanks  
> >> >> >> 
> >> >> >> Rob  
> >> >> >> 
> >> >> >> dmesg:
> >> >> >> hiddev96: USB HID v1.00 Device [MEC MEC0002] on usb-0000:05:06.1-2  
> >> >> >> 
> >> >> >> lsusb:
> >> >> >> Bus 005 Device 004: ID 0001:0000 Fry's Electronics  
> >> >> >> 
> >> >> >> cat /proc/bus/usb/device:
> >> >> >> T:  Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  4 Spd=1.5 MxCh= 0
> >> >> >> D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> >> >> >> P:  Vendor=0001 ProdID=0000 Rev= 1.00
> >> >> >> S:  Manufacturer=MEC
> >> >> >> S:  Product=MEC0002
> >> >> >> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> >> >> >> I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
> >> >> >> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms  
> >> >> >> 
> >> >> >> >
> >> >> >> >Hi Dave, 
> >> >> >> >
> >> >> >> >nothing in the outputs you sent looks like any Belkin device is
> >> >> >> >present. Are you sure it is attached to your computer? You should have
> >> >> >> >something like this in /proc/bus/usb/devices: 
> >> >> >> >
> >> >> >> >T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
> >> >> >> >D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> >> >> >> >P:  Vendor=050d ProdID=0980 Rev= 0.06
> >> >> >> >S:  Manufacturer=       
> >> >> >> >S:  Product=UPS
> >> >> >> >C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 20mA
> >> >> >> >I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
> >> >> >> >E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=248ms 
> >> >> >> >
> >> >> >> >Note "Vendor=050d", which is Belkin's vendor ID.  
> >> >> >> >
> >> >> >> >The output from newhidups does not show a 050d/XXXX device either.  
> >> >> >> >
> >> >> >> >-- Peter 
> >> >> >> >
> >> >> >> >meherenow at darkglobe.org wrote:
> >> >> >> >> 
> >> >> >> >> I have a Belkin F6H500ukUNV ups that I am attempting to get working =20
> >> >> >> >> under nut, however it
> >> >> >> >> does not appear to be detected by nut, I'm assuming that I need to =20
> >> >> >> >> feed some information
> >> >> >> >> back to you guys to get it included in the database somwhere. 
> >> >> >> >> 
> >> >> >> >> I've included (what I can think might be) the relivant outputs. Please >=20
> >> >> >> >> let me know if you
> >> >> >> >> require anything else. 
> >> >> >> >> 
> >> >> >> >> dmesg output
> >> >> >> >> /sbin/newhidsups output
> >> >> >> >> ll /dev/usb*
> >> >> >> >> cat /proc/bus/usb/devices 
> >> >> >> >> 
> >> >> >> >> p.s. I tried chmodding /dev/usb<blah> 777 just incase it was a =20
> >> >> >> >> permissions problem, but
> >> >> >> >> that didn't help either. 
> >> >> >> >> 
> >> >> >> >> Many thanks. 
> >> >> >> >> 
> >> >> >> >> ###########################################################
> >> >> >> >> dmesg output when connecting the ups 
> >> >> >> >> 
> >> >> >> >> usb 2-1: new low speed USB device using uhci_hcd and address 2
> >> >> >> >> PM: Adding info for usb:2-1
> >> >> >> >> PM: Adding info for No Bus:usbdev2.2_ep00
> >> >> >> >> usb 2-1: configuration #1 chosen from 1 choice
> >> >> >> >> PM: Adding info for usb:2-1:1.0
> >> >> >> >> hiddev96: USB HID v1.00 Device [MEC MEC0002] on usb-0000:00:10.1-1
> >> >> >> >> PM: Adding info for No Bus:usbdev2.2_ep81 
> >> >> >> 
> >> >> >> _______________________________________________
> >> >> >> Nut-upsdev mailing list
> >> >> >> Nut-upsdev at lists.alioth.debian.org
> >> >> >> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev 
> >> >> >> 
> >> >> >  
> >> >> 
> >> >  
> >> 
> > 
> 




More information about the Nut-upsdev mailing list