[Nut-upsdev] Re: [Nut-upsuser] Ablerex 625L USB version

[Carlos Rodrigues]

On 2/1/07, Jon Gough <jon.gough at eclipsesystems.com.au> wrote:
>
>     What I want to do is run the T<n>  command to have it test for a
> different length of time than the standard 10 secs.
>


Some UPSes support a "TL" command, which starts a test until the unit hits
"low battery". This test can be canceled by a "CT" command ("C" probably
kills it too, but it kills a pending shutdown too).


If I can get this to work then I can send other commands to setup the UPS
> correctly, ie wait 10 mins after loss of power before shutting servers down,
> but make sure there is 2 mins of power left to allow for shut down to occur.
>
>


What are you trying to do again? With the "megatec" driver talking with your
UPS using the megatec-over-usb patch you can already do this with NUT (using
"upssched"), although I don't think relying on time intervals is such a good
idea.


-- 
Carlos Rodrigues
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20070201/05e41b51/attachment.html